Recommended Posts

Enough is enough.

Look up in the sky in approx 5 minutes and you might see an airborne Netgear router. Either that or smash the mother out of it. Both are hard choices for pleasure.

Can someone suggest a new router for me? Or perhaps solve the mystery of this one?

Its a Netgear WGR614 V6. Over the months I have had it, its been slow at best and no connection at worst. Here are the problems.

When I download any torrents my browsing abilities die completely. The torrents will still run, but neither firefox nor IE will display any pages. After numerous retries it will open a page, but it will take almost 10 minutes to open up google. Shutting down uTorrent doesnt fix the issue. Only after a random period of time the problem is gone.

Secondly, a new symptom. Everytime I run Team Fortress 2 and go into the server browser, more problems. Trying to connect to each server gives me a "No response" yet I can refresh the list. It doesn't matter which server, I can just click on 20/30 at random and it will all be the same. When I close TF2 to google the problem etc, I realise that running TF2 has caused the internet to die. 3 times ive tried and each time Ive had to reset the router from the mains to get my internet back.

If it is the router just being a ****, then can anyone suggest me a really decent router? Please, I'm being driven mad.

My router requirements are simple:

Must have a very good wireless range. Im talking really good.

Must be able to handle torrents, at least better than this piece of ****.

Be cheap as possible. I will have about ?100 to play with, but I don't want to spend all that if I have to.

Also, I recently bought a Linksys WRT160N. Load of crap. So my thoughts on Linksys arent the best.

Thanks in advance. Maybe you can save me from pummelling this router into the next world.

Go down to get a D-Link wireless G one with a Intel VIIV logo on it (These seem to give me less problems than any other ones from other manufactures)

any of the Black D-Link boxes with the silver banding I have good luck with

Edited by winrez

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Linksys WRT54GL flashed with Tomato = Perfect

Tomato? Can you elaborate?

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Its just odd its started to happen tonight. Been playing it fine earlier :(

Linksys WRT54GL flashed with Tomato = Perfect

+1

Tomato? Can you elaborate?

http://en.wikipedia.org/wiki/Tomato_Firmware

http://www.polarcloud.com/tomato

Cheaper than the Linksys is this one:

http://www.buffalo-technology.com/products...outer-whr-g125/

~30€, works very well with Tomato.

More screenshots: http://feddern.org/tim/Bilder/Forum/tomato...ots/tomato.html

Edited by buckaroo

Try flashing it with http://www.dd-wrt.com.

Its an alternative firmware.

i used to have the same problems with uTorrent. Its opening too many connections. Limit those and your browsing problem should be solved. Dont quite know what to tell you about the TF problem. Try monitoring your connection and see whats consuming Bandwith. Perhaps something is running in the background that is killing your internet and you just haven't noticed it yet.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

Oh BS. I have the same router running the latest firmware. Sounds like an ISP problem.

Thanks people. Very interesting about Tomato.

So If I get this, I can then use tomato to make things even better?

What is the realistic wireless range on that router?

Below is the current settings I have in uTorrent. I lowered the connections by about 25% but the problem still remains.?

post-139232-1219528778_thumb.jpg

Edited by _X_

You have a 20KB/sec upload rate set -- how big is your upload pipe? At max you should be set to 80% of your upload rate.. So your saying you have a 200kbit upload pipe?

Also what are you using for dns? If your trying to access your routers dns forwarder while its busy handling your torrent traffic -- it might be a bit sluggish.. Use an a different dns server, say opendns, or your isps directly or 4.2.2.2, etc.

No matter what you do not by a dlink, dlink makes the worst networking products out there!

@OP Your billing statment should tell you, if you can't find it mabye you can tell us your isp and how much you pay each month and we might be able to found out for you.

where did you come up with the 20KB/sec limit??? You just pull it out of your ass?

What is the connection speed you get from your ISP? You could go to http://www.speedtest.net/ when your internet is working decent, and your not doing torrents and do a test.

post-14624-1219580101.png

So from this test my upload speed is 1352 kb/s, so lets say its 1200 to be on the safe side. This is reported in bits, so to convert to bytes divide by 8 = 1200/8 = 150KBytes/sec.

Now lets make sure we only use at max 80% of that.. so my upload limit should at MAX be 150 * .80 = 120KBytes/sec if you still having issues lower it some more.

When you fill up your upload side.. you can not query dns to find out where to go, you can not query the webserver to send you pages, etc.. so even if your not using all of your download bandwidth.. If your upload side is full -- your internet browsing will be utter crap.

Since you do not know who your using for dns, its pretty much a given your pointing to your router.. From a command prompt do a ipconfig /all

It will show you what IP your machine is using for dns.

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : p4-24g

Primary Dns Suffix . . . . . . . : local.lan

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : local.lan

Ethernet adapter Gig:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC

Physical Address. . . . . . . . . : 00-09-5B-E0-FB-AD

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.100

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.253

DNS Servers . . . . . . . . . . . : 192.168.1.4

If that is the same IP address as your Default gateway -- then your bouncing your dns off your router, who then asks another server.. Be it your ISP dns by default, or could of changed it. But that sounds like a big no.

Change your machine to use opendns, or your isp directly (should be able to see where your router is pointing in a status page on it) Or use 4.2.2.2, 4.2.2.3 or 4.2.2.4 which are dns that answer to the public and are quite fast.

The opendns site has all kinds of help on change your machines dns, or change your router to use it, or have it hand different dns to your clients, etc.

When your router is quite busy handling all the connections for p2p, its possible that dns is not on the top of its priority lists ;) And can become quite sluggish or not respond at all if the router is too busy. Most soho routers dns forwarders blow chunks anyway.. Expecting them to be responsive while your router is busy handling 1,000 of connections is quite often asking too much ;)

^ Thank you for the information, even the ass bit :p

I followed it and changed my dns. So lets see how that works. One final thing, I worked out the upload rate, according to the maths it should be 70 instead of my 20. But isnt that too high? Won't that effect other programmes? Online gaming etc?

313102974.png

Well if your upload pipe is 733kbps, lets call it 700/8 = 87.5 * .8 = yup 70KB/sec would be about 80% of your current upload speed.

So 20 is well below your upload pipe -- and your torrents should not be causing you an issue because of a full upload pipe. It could be that dns is your problem?? Or it could be that router just blows and can not really handle torrents.

These soho routers have 2 or 4MB of ram and storage, and when you think about it pretty slow proccessors.. Most of them by default will leave open every tcp connection for 5 days -- this really eats up their available memory.

The 3rd party firmware has made adjustments for this.

post-14624-1219582704.png

I have never heard of anyone saying that the performance of their router was better under native firmware, or that native firmware handled p2p better, etc.

Since I changed the DNS, I fired up uTorrent and left it running while I carried on. I seem to be browsing so much better. No lag and every page loads quick and as it should. Before, a couple of minutes of utorrent and my internet browsing was a right off. :D

Well your router is busy handling connections.. So yeah asking it to also go ask your isp for dns could be asking a bit much ;)

Also -- opendns is much better than many ISPs dns anyway.. Quite often the ISPs dns are undersized for how many users are hitting it, you will normally see much better response from opendns. They also provide many other features that your ISP does not.

Let it run for a while, and let us know.. Also a move from 20 to 70 on your upload pipe should give you way better download speeds on your torrents as well.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ive always been fascinated by old software this is an old video player for windows from apple
    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
    • DuRoBo Krono Review: Portable E-Ink reader with great ideas that need a bit of improvement by Taras Buria Phone-sized e-readers are gaining traction these days, with more people treating them as a getaway device to cure phone addiction (or at least they are trying to) or having a more pocket-friendly reader that is easier to carry and hold. The market now has plenty of such readers to choose from, and DuRoBo is the latest addition, a new player that offers a more interesting approach to the idea. The Krono is a $279 e-reader with an interesting twist, which tries to make the device more fun and ergonomic. Here is my review. Disclaimer: DuRoBo provided the review sample without any editorial input or pre-approval. The Krono comes in a phone-sized box with pink accents. Inside, you get the device itself, a short user manual, and a USB cable. The cable is a bit old-fashioned, Type-A to Type-C, which is a bit disappointing. Hot take: I would rather have no cable in the box rather than another Type-A cable that gets immediately thrown into my box full of similar cables I never use. The Krono also has no charger in the box, as it relies on accessories you already own, which is fine with me. Here are the specs: Dimensions 154 x 80 x 9.0 mm or 6.06" x 3.15" x 0.35" 173 g or 6.10 oz Materials Black or White plastic Display 6.13-inch E-Ink Carta 1200, 1,648 x 824 pixels, 300 ppi Touch-capacitive. Dual-tone frontlight. Processor 8-core Qualcomm Snapdragon 690 (QTI SM6350) 2 performance cores at 2.07 GHz 4 efficiency cores at 1.71 GHz Memory 6 GB Storage 128GB, non-expandable ~104GB available out-of-the-box Operating system Android 15 with a custom launcher Connectivity Wi-Fi and Bluetooth Battery 3,950 mAh battery Buttons and port USB Type-C port Power button, Volume button, Smart Dial Breathing Lights Audio Mono Speaker and Dual microphones In the box The Krono, a Type-A to Type-C cable, user manual Price $279 on Amazon First impressions Right off the bat, no, this is not a phone replacement. Do not approach this device thinking it can serve you as a dumb phone to cure your TikTok addiction. In addition to the fact that the Krono has no cellular connectivity, I strongly believe that no amount of extra devices can fix your phone addiction until you put some serious effort into it. The Krono is a phone-sized e-reader, a companion for your phone dedicated to reading without distractions. The DuRoBo Krono is made of plastic with a very fine texture. It is hardly premium, but I also cannot say it feels cheap. The device is also a bit thick, quite dense, and well-built without rattling or cracking. You get to choose between two colors: white and black. The front has quite thick bezels, which is hardly surprising for an e-ink device. These things use front light, with LEDs usually placed on the screen perimeter. While I do not mind thicker bezels, the notably larger chin cheapens the look a little. What I mind is a notable seam between the display and the main case, which, after just two days of use, collected plenty of dust and specks. The back of the Krono is what makes the device stand out. There is a cylinder (DuRoBo calls it the Axis) embedded in the back of the reader, housing three elements: a power button on the right edge, a Smart Dial on the left edge, and "Breathing Lights" on the back. An etched DuRoBo logo sits below the cylinder, and it is the only piece of branding you can find on the device. Overall, the design and materials are very unassuming, but the cylinder with additional control elements certainly elevates the look and makes it more interesting. Other physical elements include two microphones (one on the top edge and one on the bottom edge), a USB Type-C port, a volume rocker, and a single mono speaker. There is no fingerprint reader, so if you want to protect your device, a PIN is your only option. The official TPU case is not the most premium-looking Display The Krono has a 6.1-inch E-Ink Carta 1200 touchscreen display with a resolution of 1,648 x 824 pixels (300 ppi). The display is front-lit, and you can adjust the brightness and temperature from cool to warm. Unfortunately, the Krono lacks automatic brightness and temperature adjustments, and you cannot set a custom schedule for the frontlight. However, you can set it to always enable frontlight so that you can see what is happening on the screen when turning it on in a dark environment. On the bright side (get it?), the front light can get extremely dim so that the screen is barely readable in a pitch-dark room. The front light is also uniform across the screen, with no noticeable temperature gradients. I am very susceptible to uneven front light, and it is very easy for me to notice it, but the Krono is doing a very good job in this area. I also like that the edge shadow is not very prominent and barely visible in the black variant. E-Ink Carta 1200 is not the newest generation (there are Carta 1250 and 1300), but it is still a good display. It supports three modes: Clarity, Speed, and Quality. In Clarity mode, text is very sharp and easy to read, but you trade that for more ghosting, a slower refresh rate, and more artifacts when the display changes images. Speed mode, as the name suggests, boosts refresh rate and reduces ghosting, but fine print and text become more jagged. Finally, Quality mode is only available in Android apps. It has the lowest refresh rate, but in return, you get much better visuals, improved gradients, and more. Like brightness and temperature, you can toggle modes from the control center. It is available when swiping from the top-right corner of the screen (the top-left is for notifications). I also like that the Krono can work as a desk clock when not in use. It has a bunch of screensavers, including horizontal clocks with time, date, and current battery level. The screen refreshes once per minute, and battery drain is extremely low (not even 1% in 24 hours). It is a great use of the technology, and another thing I wish more e-ink devices featured. Smart Dial The Smart Dial is Krono's main party trick. It sits on the left side of the device and serves multiple purposes. You can twist or press it to perform various actions, depending on the current use case scenario. When reading books, twisting the dial flips through pages, and pressing it refreshes the screen. On the home screen, the dial adjusts the brightness, and holding the dial pressed launches voice note recording. Finally, a quick double press launches the DuRoBo AI chatbot. While the dial scroll is not notched, it is very smooth and has haptic feedback that confirms your actions, which feels very nice. As a long-term Apple Watch user, I love the idea behind the dial. It feels very natural and oddly satisfying to use, especially with that subtle haptic feedback. I never liked flipping pages with touch input, and I strongly believe each e-reader should come with some sort of physical controls for turning pages. The Krono has both volume buttons (which also work as page turners) and the dial, so you are free to use whichever you prefer. With that said, the dial is not perfect. For one, it sticks out of the case way too far for my liking, raising concerns about durability and longevity when carrying the Krono around in a pocket (it is a pocket-sized device after all). Also, it has too much wobble, which cheapens the experience and makes it feel a bit flimsy and unsecured. While there are two plastic guards on the Krono's case, they are way too small for any kind of protection. I also think DuRoBo should let users customize dial actions (the only available customization is scroll direction), particularly for long and double presses. Not everyone needs voice notes, and DuRoBo AI does not work without an active internet connection, leaving the long press essentially useless when offline. I do not mind these features, and I genuinely think they are useful, but I would rather have the ability to toggle between screen modes, turn the frontlight on/off, or launch my favorite app. I also agree with people on Reddit asking developers to let users adjust the dial sensitivity. I hope this is something DuRoBo can implement with a software update to make the experience more personalized (it is a Smart Dial, after all) and incentivize users to fiddle with the Dial more often. The Dial is a fantastic idea, so please, guys, improve it a little. As for ergonomics, they are mostly fine, but the dial's position may feel a little awkward and way too high. When I use a phone or a phone-sized gadget, I tend to rest one of its corners on my palm for a more secure grip. With the Krono, such a grip is impossible because you cannot reach the dial even with big hands. You have to lower the reader a bit and hold it like a bottle without any extra support for the bottom edge. Such a grip is not necessarily uncomfortable (the Krono is also light enough for it), but it requires a bit of muscle retraining. Sometimes, I do not bother with the dial and hold the Krono like my phone, flipping through pages with volume buttons, as they are perfectly positioned for my right-hand thumb. Interestingly, when testing the Krono, I would often find myself thinking that a roller embedded in the long plastic cylinder on the back of the device would have been a much more comfortable solution. There is a free idea for you, guys. Software The Krono runs Android 15 with a very minimal launcher on top. The home screen presents you with a list of apps, a scrollable list of widgets, and your user profile. Widgets can display time, calendar, or recent books for quick access. You can also add or remove apps from the home screen to keep the most useful stuff around without tapping "Apps." I like this minimalistic approach; it looks clean, easy to understand, and light. I understand that some may find the list of all apps way too clean, but fortunately, DuRoBo lets you switch to traditional icons. The reader also has a bunch of preinstalled apps: Read: The default app for reading. Browser: A Chromium-based browser. Files: A simple file manager. Music: A simple music player. Spark: A voice recorder with transcription support and AI summarization DuRoBo AI: A built-in AI chatbot. Transfer: An app for file transfer over Wi-Fi. If that is not enough, there is the Google Play Store, where you can download all the extra apps you need, alternative readers, podcast apps, chatbots, and more. DuRoBo is not trying to give you an all-in-one device. The standard software experience is quite minimal, which makes it easy to approach and learn. The standard reader supports EPUB, EPUB3, AZW3, MOBI, PDF, TXT, DOC, and DOCX, which is more than enough to let you read most books without third-party software. As for customizing the reading experience, you can select one of five built-in fonts, adjust size and thickness, adjust margins and spacing (only three variants for each), change text alignment and direction, toggle the reading status bar, and switch to dark mode. There is also text-to-speech, which utilizes Android's default TTS tech. While I like the simplistic approach, I cannot help but feel DuRoBo could have made the built-in reader a bit more customizable. However, I am not going to bog down on this, as you can always install any other reader you prefer using the Play Store or by sideloading an APK. Getting books to the Krono is very simple. Given that the device is an Android smartphone without cellular connectivity, you can transfer files via a USB Type-C cable, download them using the built-in browser, share them over Bluetooth, or use cloud storage. My favorite was the built-in Transfer app. It is simple, reliable, and very well-designed. I was surprised by how well-designed the web portal is. It is fast, pretty, and properly categorized. Well done! Once you have your books loaded, you can highlight or underline text, add annotations, bookmark pages, check the table of contents, and ask AI about the selected text. Unfortunately, the Krono has no built-in vocabulary, but again, that is something a third-party reader could fix. Overall, the built-in reader is light and snappy, with just the minimum amount of features for a regular user to enjoy reading books. The Krono has no built-in reading tracking, so stat nerds will have to look for third-party reading apps. However, you can set a daily reading goal, and the reader will notify you when you reach it (for example, one hour). You can also set a reminder to read at a certain time, and when the time comes, the Krono will light up its back LEDs and unlock itself to nudge you. Other than that, the rear LEDs do nothing, not even showing charging progress, which is an unfortunate misopportunity if you ask me. Quirks aside, Krono's Android runs quite snappily and bug-free. Early reviews of the Krono criticized its Android 13-based software quite a lot, but now, the reader runs Android 15, and its software has fixed plenty of initial complaints. I never experienced any issues with built-in apps. AI attempts The DuRoBo Krono comes with a built-in AI chatbot. There is no information on what model powers this thing, but the system says it was "trained by Google." You can launch the bot from the app list or by double-pressing the dial. It works just like any other chatbot, and you can ask it anything by typing or using voice input. The AI saves your chats, and you can rename, export, or delete them. DuRoBo AI requires an active internet connection, and it does not work offline. Its reach and capabilities are also limited. You can only chat in the app and use it in the reader app as a makeshift vocabulary. However, the implementation is kinda awkward. You can only send a selected portion of text to AI without giving it any requests or instructions. I highlighted the word "dumb," and it apologized to me for not being useful. You also cannot ask follow-up questions or send the generated response to a separate chat. The chatbot is also slow, even with fast Wi-Fi, making the overall experience quite frustrating, which makes me again wish for the ability to remap the double press to something else. Spark, the standard voice recording app, also uses AI for note summarization and transcribing. Neither feature works offline, unfortunately. Spark records notes up to 30 minutes using Krono's dual microphones, and you can rename or export notes. Transcription quality is decent, and the speed is alright, but you can find much better solutions in the Google Play Store. What I like about Spark is that transcribed notes are not locked, and you can always type more to elaborate on your ideas, which is handy. Overall, I like that the Krono is not shoving AI down my throat, but to be honest, there is really not that much to shove. AI features here feel raw and need improvements to be more useful. Battery Life Like most E-Ink readers, the Krono has fantastic battery life. Even with a clock as a screensaver, its standby power consumption is incredibly low. And when in use, you can get weeks of reading on a single charge. Without the front light, my unit never sipped more than one or two percent of battery during a one-hour reading session. It was nice to see plenty of battery-related settings. You can limit charging at 80% to protect battery health long-term, check the number of charging cycles, manufacturing/first-time use date, battery health, and the maximum capacity. Additionally, the Krono lets you select what hardware remains enabled when sleeping. This lets you keep Wi-Fi and Bluetooth on (say, if you want to receive notifications, for some reason) and keep audio playing when locked. Turning these features off effectively eliminates any standby battery drain. I left my Krono sitting for 24 hours with a clock screensaver on, and it did not drop a single percent. The pretty big 3,950 mAh battery justifies the device's thickness and ensures you do not have to charge it for long periods. Speaking of charging, it is capped at only 10W, which is a bit disappointing, as getting such a big battery to 100% takes a notably long time in the era of super-fast charging smartphones. DuRoBo Moodi The Moodi is a standalone, optional accessory for your Krono. It is a wireless remote with two customizable buttons that you can use to flip pages, control media, or scroll webpages. The accessory connects via Bluetooth. Despite having a built-in rechargeable battery, it is extremely light. While the Moodi's shape and form factor is not what I would call particularly ergonomic, it is not uncomfortable to hold and use. The Moodi comes with six removable magnetic buttons with various smiley faces. Buttons sit securely, and they have nice-feeling, albeit a little loud, clicks. It is a cute touch that adds a little more fun and character to the device. There is also an accented power button and a single status LED. The latter displays charging status and connection mode. The Moodi supports three modes: Reading: Buttons work as volume buttons, allowing you to flip pages in the built-in reader or other apps that support page turning with volume buttons. Media: Buttons work as skip forward/backward, which is useful when listening to audiobooks, podcasts, or music. Scroll: The third mode lets you scroll pages in the web browser or any other application The Krono properly detects the Moodi and presents you with an on-screen guide when you connect it for the first time (it also displays the battery level). However, you can only change modes by holding both buttons for a few seconds. It is also worth noting that the Moodi works with other devices. I connected it to my iPhone and it let me adjust volume or control media playback. Sadly, the scroll did not work, so you cannot use it to waste time scrolling TikToks. Overall, the Moodi is a cute little accessory, which I can recommend for those who read a lot. It is very useful for remote page flipping when you do not want to burden your hands by holding the Krono all the time. I only wish DuRoBo included a lanyard for the built-in loop. As for the battery life, after using the Moodi for a few days, I only managed to drop several percent of its 90 mAh battery. Despite the small size, it is rated for weeks of use, which is pretty impressive. At $35.99, I cannot say the Moodi is a must-have accessory, but I see the appeal. I prefer using the Krono with its Smart Dial, as I rarely read for more than 40-60 minutes in one sitting. However, if you have a stand and like reading for long periods, the Moodi is the right thing to have. It is a bit more expensive than regular page flippers on Amazon, but it is on par with similar products from Kobo or BOOX. Plus, it has a little more fun to it with removable buttons and better integration into the Krono. Conclusion At the end of the day, DuRoBo Krono is a nice pocket-sized e-reader. Its software focuses on the main things without trying to be everything at once. The smart dial idea is unique and great, and I wish more manufacturers had something similar in their devices. The display is also good, with an even frontlight and "always-on" support. I did not notice any deal-breaking issues with the Krono. However, you can feel that the idea needs some improvements, such as a slightly stiffer dial in a more ergonomic location, perhaps a little more premium materials, and better software customization. I hope the company won't give up on the idea and improve the dial and ergonomics in the second generation. Buy DuRoBo Krono Black - $279.99 on Amazon Buy DuRoBo Krono White - $279.99 on Amazon Buy DuRoBo Moodi - $35.99 on Amazon As an Amazon Associate, we earn from qualifying purchases.
    • In what way is any of what I said incorrect? To install an update you need to close all browser instances, upping it from once a month to once a fortnight is an inconvenience for users. Particularly when updates don't offer functionality that users want (notably copilot). Security updates should come as they are needed, not on a release schedule
    • Dopamine 3.0.6 by Razvan Serea Dopamine is an awesome free audio player which tries to make organizing and listening to music as simple and pretty as possible. Dopamine has been designed for Windows 7, Windows 8.x and Windows 10 and plays mp3, ogg vorbis, flac, wma and m4a/aac music formats quite well. The best part? It's created by long-time Neowin member, Raphaël Godart. If you’re looking for a music player to handle a large music collection, you should definitely give Dopamine a try. Dopamine 3.0.6 changelog: Fixed Manually edited album covers are overwritten on the next collection refresh Fixed AppImage package not working on modern GNU/Linux distributions Deleting song from playlist sometimes fails Playback controls only work when clicking on upper half of the buttons It's unclear that files must be tagged with an external ReplayGain scanner (for example rsgain) before normalization can take effect. Change to Artist or Album tags is not reflected in the song list view nor in the Now Playing information ReplayGain issues Smart playlist filters ignore text containing accents or other special characters Some MP3 files trigger an "MPEG header not found" error due to a too-narrow initial MPEG header scan range Changed Updated the Vietnamese translation Download: Dopamine 3.0.6 | 122.0 MB (Open Source) Links: Home Page | Forum Discussion | Screenshot | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      195
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!