Recommended Posts

Enough is enough.

Look up in the sky in approx 5 minutes and you might see an airborne Netgear router. Either that or smash the mother out of it. Both are hard choices for pleasure.

Can someone suggest a new router for me? Or perhaps solve the mystery of this one?

Its a Netgear WGR614 V6. Over the months I have had it, its been slow at best and no connection at worst. Here are the problems.

When I download any torrents my browsing abilities die completely. The torrents will still run, but neither firefox nor IE will display any pages. After numerous retries it will open a page, but it will take almost 10 minutes to open up google. Shutting down uTorrent doesnt fix the issue. Only after a random period of time the problem is gone.

Secondly, a new symptom. Everytime I run Team Fortress 2 and go into the server browser, more problems. Trying to connect to each server gives me a "No response" yet I can refresh the list. It doesn't matter which server, I can just click on 20/30 at random and it will all be the same. When I close TF2 to google the problem etc, I realise that running TF2 has caused the internet to die. 3 times ive tried and each time Ive had to reset the router from the mains to get my internet back.

If it is the router just being a ****, then can anyone suggest me a really decent router? Please, I'm being driven mad.

My router requirements are simple:

Must have a very good wireless range. Im talking really good.

Must be able to handle torrents, at least better than this piece of ****.

Be cheap as possible. I will have about ?100 to play with, but I don't want to spend all that if I have to.

Also, I recently bought a Linksys WRT160N. Load of crap. So my thoughts on Linksys arent the best.

Thanks in advance. Maybe you can save me from pummelling this router into the next world.

Go down to get a D-Link wireless G one with a Intel VIIV logo on it (These seem to give me less problems than any other ones from other manufactures)

any of the Black D-Link boxes with the silver banding I have good luck with

Edited by winrez

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Linksys WRT54GL flashed with Tomato = Perfect

Tomato? Can you elaborate?

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Its just odd its started to happen tonight. Been playing it fine earlier :(

Linksys WRT54GL flashed with Tomato = Perfect

+1

Tomato? Can you elaborate?

http://en.wikipedia.org/wiki/Tomato_Firmware

http://www.polarcloud.com/tomato

Cheaper than the Linksys is this one:

http://www.buffalo-technology.com/products...outer-whr-g125/

~30€, works very well with Tomato.

More screenshots: http://feddern.org/tim/Bilder/Forum/tomato...ots/tomato.html

Edited by buckaroo

Try flashing it with http://www.dd-wrt.com.

Its an alternative firmware.

i used to have the same problems with uTorrent. Its opening too many connections. Limit those and your browsing problem should be solved. Dont quite know what to tell you about the TF problem. Try monitoring your connection and see whats consuming Bandwith. Perhaps something is running in the background that is killing your internet and you just haven't noticed it yet.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

Oh BS. I have the same router running the latest firmware. Sounds like an ISP problem.

Thanks people. Very interesting about Tomato.

So If I get this, I can then use tomato to make things even better?

What is the realistic wireless range on that router?

Below is the current settings I have in uTorrent. I lowered the connections by about 25% but the problem still remains.?

post-139232-1219528778_thumb.jpg

Edited by _X_

You have a 20KB/sec upload rate set -- how big is your upload pipe? At max you should be set to 80% of your upload rate.. So your saying you have a 200kbit upload pipe?

Also what are you using for dns? If your trying to access your routers dns forwarder while its busy handling your torrent traffic -- it might be a bit sluggish.. Use an a different dns server, say opendns, or your isps directly or 4.2.2.2, etc.

No matter what you do not by a dlink, dlink makes the worst networking products out there!

@OP Your billing statment should tell you, if you can't find it mabye you can tell us your isp and how much you pay each month and we might be able to found out for you.

where did you come up with the 20KB/sec limit??? You just pull it out of your ass?

What is the connection speed you get from your ISP? You could go to http://www.speedtest.net/ when your internet is working decent, and your not doing torrents and do a test.

post-14624-1219580101.png

So from this test my upload speed is 1352 kb/s, so lets say its 1200 to be on the safe side. This is reported in bits, so to convert to bytes divide by 8 = 1200/8 = 150KBytes/sec.

Now lets make sure we only use at max 80% of that.. so my upload limit should at MAX be 150 * .80 = 120KBytes/sec if you still having issues lower it some more.

When you fill up your upload side.. you can not query dns to find out where to go, you can not query the webserver to send you pages, etc.. so even if your not using all of your download bandwidth.. If your upload side is full -- your internet browsing will be utter crap.

Since you do not know who your using for dns, its pretty much a given your pointing to your router.. From a command prompt do a ipconfig /all

It will show you what IP your machine is using for dns.

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : p4-24g

Primary Dns Suffix . . . . . . . : local.lan

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : local.lan

Ethernet adapter Gig:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC

Physical Address. . . . . . . . . : 00-09-5B-E0-FB-AD

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.100

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.253

DNS Servers . . . . . . . . . . . : 192.168.1.4

If that is the same IP address as your Default gateway -- then your bouncing your dns off your router, who then asks another server.. Be it your ISP dns by default, or could of changed it. But that sounds like a big no.

Change your machine to use opendns, or your isp directly (should be able to see where your router is pointing in a status page on it) Or use 4.2.2.2, 4.2.2.3 or 4.2.2.4 which are dns that answer to the public and are quite fast.

The opendns site has all kinds of help on change your machines dns, or change your router to use it, or have it hand different dns to your clients, etc.

When your router is quite busy handling all the connections for p2p, its possible that dns is not on the top of its priority lists ;) And can become quite sluggish or not respond at all if the router is too busy. Most soho routers dns forwarders blow chunks anyway.. Expecting them to be responsive while your router is busy handling 1,000 of connections is quite often asking too much ;)

^ Thank you for the information, even the ass bit :p

I followed it and changed my dns. So lets see how that works. One final thing, I worked out the upload rate, according to the maths it should be 70 instead of my 20. But isnt that too high? Won't that effect other programmes? Online gaming etc?

313102974.png

Well if your upload pipe is 733kbps, lets call it 700/8 = 87.5 * .8 = yup 70KB/sec would be about 80% of your current upload speed.

So 20 is well below your upload pipe -- and your torrents should not be causing you an issue because of a full upload pipe. It could be that dns is your problem?? Or it could be that router just blows and can not really handle torrents.

These soho routers have 2 or 4MB of ram and storage, and when you think about it pretty slow proccessors.. Most of them by default will leave open every tcp connection for 5 days -- this really eats up their available memory.

The 3rd party firmware has made adjustments for this.

post-14624-1219582704.png

I have never heard of anyone saying that the performance of their router was better under native firmware, or that native firmware handled p2p better, etc.

Since I changed the DNS, I fired up uTorrent and left it running while I carried on. I seem to be browsing so much better. No lag and every page loads quick and as it should. Before, a couple of minutes of utorrent and my internet browsing was a right off. :D

Well your router is busy handling connections.. So yeah asking it to also go ask your isp for dns could be asking a bit much ;)

Also -- opendns is much better than many ISPs dns anyway.. Quite often the ISPs dns are undersized for how many users are hitting it, you will normally see much better response from opendns. They also provide many other features that your ISP does not.

Let it run for a while, and let us know.. Also a move from 20 to 70 on your upload pipe should give you way better download speeds on your torrents as well.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Audacious 4.6.1 by Razvan Serea Audacious is a lightweight, open-source audio player that emphasizes simplicity, performance, and sound quality. Designed for Linux, Windows, and macOS, it supports a wide range of audio formats, internet radio streaming, and playlist management. Users can customize the interface with Winamp-style skins or modern themes, making it flexible for different preferences. Audacious also includes an equalizer, advanced audio effects, and a plugin system for extending functionality. Its low resource usage makes it especially suitable for older computers or users who value efficiency without sacrificing playback quality. Audacious key features: High audio quality – delivers clean, gapless playback with minimal distortion. Wide format support – plays MP3, FLAC, Ogg Vorbis, AAC, WAV, WMA, and more. Internet radio streaming – supports Shoutcast, Icecast, and other online streams. Winamp skin support – classic, nostalgic look for users who prefer the old-school style. Modern GTK-based interface – clean, simple UI with a more modern feel. Customizable themes – change appearance through skins and themes. Advanced playlist management – organize, save, and edit playlists with ease. Equalizer – fine-tune audio output with a built-in graphical equalizer. Audio effects – built-in DSP options like crossfade, replay gain, and more. Plugin system – extend functionality with additional components. File metadata support – displays and organizes music based on tags. Drag-and-drop support – quickly add songs or playlists. Global hotkey support – control playback without switching windows. Bit-perfect output modes – bypass system mixers for pure audio output. ReplayGain support – normalizes track loudness automatically. Cue sheet support – play entire albums from a single audio file with .cue. MPRIS2 integration – integrates with Linux desktop environments for media controls. Advanced resampling options – adjust playback quality with different resampler settings. Gapless playback – seamless transition between tracks encoded properly. Crossfade plugin – blend one song into the next smoothly. Last.fm scrobbling plugin – track listening history online. Remote control support – control Audacious via command-line or scripts. Lyrics plugin – display song lyrics if available. Alarm / timer plugin – start or stop playback at set times. SOX resampler plugin – high-quality resampling for audiophiles. Spectrum analyzer / visualization plugins – visual feedback while playing music. Headphone crossfeed effect – simulates speaker listening for headphones. Customizable buffer size – tweak latency and playback smoothness. Audacious 4.6.1 changelog: Use XDG cache dir to store temporary files (#1817) Accept embedded lyrics in more cases (#1818) Bump .so and plugin ABI versions retrospectively (#1819) Include Georgian translation (#1820) Fix build on systems using musl instead of glibc (#1823) Download: Audacious 4.6.1 | 48.2 MB (Open Source) Download: Portable Audacious 4.6.1 | 69.8 MB View: Audacious Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I really wonder if this has to do with the built in VPN or "private DNS" of browsers that trip up legal requirements like cookie consent and Cloudflare (to avoid all the botnet attacks we get). And BTW some botnets still manage to get past Cloudflare, we are constantly having to tweak it to block malicious traffic that ultimately cause a DDoS.
    • CPPC states can also be messed around with in most UEFI settings but aren't as robust as the ones that the Windows Scheduler can provide! Make sure you look into what your motherboard also has before customizing for the Windows Scheduler.
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!