Recommended Posts

Enough is enough.

Look up in the sky in approx 5 minutes and you might see an airborne Netgear router. Either that or smash the mother out of it. Both are hard choices for pleasure.

Can someone suggest a new router for me? Or perhaps solve the mystery of this one?

Its a Netgear WGR614 V6. Over the months I have had it, its been slow at best and no connection at worst. Here are the problems.

When I download any torrents my browsing abilities die completely. The torrents will still run, but neither firefox nor IE will display any pages. After numerous retries it will open a page, but it will take almost 10 minutes to open up google. Shutting down uTorrent doesnt fix the issue. Only after a random period of time the problem is gone.

Secondly, a new symptom. Everytime I run Team Fortress 2 and go into the server browser, more problems. Trying to connect to each server gives me a "No response" yet I can refresh the list. It doesn't matter which server, I can just click on 20/30 at random and it will all be the same. When I close TF2 to google the problem etc, I realise that running TF2 has caused the internet to die. 3 times ive tried and each time Ive had to reset the router from the mains to get my internet back.

If it is the router just being a ****, then can anyone suggest me a really decent router? Please, I'm being driven mad.

My router requirements are simple:

Must have a very good wireless range. Im talking really good.

Must be able to handle torrents, at least better than this piece of ****.

Be cheap as possible. I will have about ?100 to play with, but I don't want to spend all that if I have to.

Also, I recently bought a Linksys WRT160N. Load of crap. So my thoughts on Linksys arent the best.

Thanks in advance. Maybe you can save me from pummelling this router into the next world.

Go down to get a D-Link wireless G one with a Intel VIIV logo on it (These seem to give me less problems than any other ones from other manufactures)

any of the Black D-Link boxes with the silver banding I have good luck with

Edited by winrez

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Linksys WRT54GL flashed with Tomato = Perfect

Tomato? Can you elaborate?

The TF2 one sounds like you are not opening the right ports for it in the router, thus it cannot communicate, I am unsure of the ports used by the game though :(

Its just odd its started to happen tonight. Been playing it fine earlier :(

Linksys WRT54GL flashed with Tomato = Perfect

+1

Tomato? Can you elaborate?

http://en.wikipedia.org/wiki/Tomato_Firmware

http://www.polarcloud.com/tomato

Cheaper than the Linksys is this one:

http://www.buffalo-technology.com/products...outer-whr-g125/

~30€, works very well with Tomato.

More screenshots: http://feddern.org/tim/Bilder/Forum/tomato...ots/tomato.html

Edited by buckaroo

Try flashing it with http://www.dd-wrt.com.

Its an alternative firmware.

i used to have the same problems with uTorrent. Its opening too many connections. Limit those and your browsing problem should be solved. Dont quite know what to tell you about the TF problem. Try monitoring your connection and see whats consuming Bandwith. Perhaps something is running in the background that is killing your internet and you just haven't noticed it yet.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

tomato is a 3rd party firmware, the GL model of the wrt54 is made to allow for 3rd party firmware.. This would be a great choice, or you could take a look at dd-wrt or openwrt as other options for 3rd party firmware.

Unless you configure your p2p app to not use up all of your bandwidth, or your router supports QOS then yes trying to browse the internet is going to be like mud.. Correctly setup your p2p app to allow some bandwidth on your upload pipe for dns and queries to your webservers and you should be able to browse just fine.

I never even notice when download anything.

As to weirdness even after turning off a torrent -- You will be seeing traffic to your router for DAYS after you stop a torrent.. DAYS!! This will normally not cause you a problem, but depending on the ram and memory of a router -- torrent in general will push them to the limit.. most of them are not really up to the task. Even though you were not currently downloading a torrent -- its effects could still be affecting your routers performance.

wrt54GL running 3rd party firmware has made adjustments to the number of connections it remembers and how long they stay open, etc. to better allow for torrents.

The WRT160N you purchased supports dd-wrt.. I agree with you, the native firmware that comes with most every linksys products I have seen are crap!! So put something better on it!! This can be said for most every single native firmware out there.. Most of them are just so freaking limited it what they support, when the hardware can do so much more.

If you still have your wrt160N, put dd-wrt -- if not then a wrt54GL with 3rd party on it is a great choice.

Oh BS. I have the same router running the latest firmware. Sounds like an ISP problem.

Thanks people. Very interesting about Tomato.

So If I get this, I can then use tomato to make things even better?

What is the realistic wireless range on that router?

Below is the current settings I have in uTorrent. I lowered the connections by about 25% but the problem still remains.?

post-139232-1219528778_thumb.jpg

Edited by _X_

You have a 20KB/sec upload rate set -- how big is your upload pipe? At max you should be set to 80% of your upload rate.. So your saying you have a 200kbit upload pipe?

Also what are you using for dns? If your trying to access your routers dns forwarder while its busy handling your torrent traffic -- it might be a bit sluggish.. Use an a different dns server, say opendns, or your isps directly or 4.2.2.2, etc.

No matter what you do not by a dlink, dlink makes the worst networking products out there!

@OP Your billing statment should tell you, if you can't find it mabye you can tell us your isp and how much you pay each month and we might be able to found out for you.

where did you come up with the 20KB/sec limit??? You just pull it out of your ass?

What is the connection speed you get from your ISP? You could go to http://www.speedtest.net/ when your internet is working decent, and your not doing torrents and do a test.

post-14624-1219580101.png

So from this test my upload speed is 1352 kb/s, so lets say its 1200 to be on the safe side. This is reported in bits, so to convert to bytes divide by 8 = 1200/8 = 150KBytes/sec.

Now lets make sure we only use at max 80% of that.. so my upload limit should at MAX be 150 * .80 = 120KBytes/sec if you still having issues lower it some more.

When you fill up your upload side.. you can not query dns to find out where to go, you can not query the webserver to send you pages, etc.. so even if your not using all of your download bandwidth.. If your upload side is full -- your internet browsing will be utter crap.

Since you do not know who your using for dns, its pretty much a given your pointing to your router.. From a command prompt do a ipconfig /all

It will show you what IP your machine is using for dns.

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : p4-24g

Primary Dns Suffix . . . . . . . : local.lan

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : local.lan

Ethernet adapter Gig:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC

Physical Address. . . . . . . . . : 00-09-5B-E0-FB-AD

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.100

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.253

DNS Servers . . . . . . . . . . . : 192.168.1.4

If that is the same IP address as your Default gateway -- then your bouncing your dns off your router, who then asks another server.. Be it your ISP dns by default, or could of changed it. But that sounds like a big no.

Change your machine to use opendns, or your isp directly (should be able to see where your router is pointing in a status page on it) Or use 4.2.2.2, 4.2.2.3 or 4.2.2.4 which are dns that answer to the public and are quite fast.

The opendns site has all kinds of help on change your machines dns, or change your router to use it, or have it hand different dns to your clients, etc.

When your router is quite busy handling all the connections for p2p, its possible that dns is not on the top of its priority lists ;) And can become quite sluggish or not respond at all if the router is too busy. Most soho routers dns forwarders blow chunks anyway.. Expecting them to be responsive while your router is busy handling 1,000 of connections is quite often asking too much ;)

^ Thank you for the information, even the ass bit :p

I followed it and changed my dns. So lets see how that works. One final thing, I worked out the upload rate, according to the maths it should be 70 instead of my 20. But isnt that too high? Won't that effect other programmes? Online gaming etc?

313102974.png

Well if your upload pipe is 733kbps, lets call it 700/8 = 87.5 * .8 = yup 70KB/sec would be about 80% of your current upload speed.

So 20 is well below your upload pipe -- and your torrents should not be causing you an issue because of a full upload pipe. It could be that dns is your problem?? Or it could be that router just blows and can not really handle torrents.

These soho routers have 2 or 4MB of ram and storage, and when you think about it pretty slow proccessors.. Most of them by default will leave open every tcp connection for 5 days -- this really eats up their available memory.

The 3rd party firmware has made adjustments for this.

post-14624-1219582704.png

I have never heard of anyone saying that the performance of their router was better under native firmware, or that native firmware handled p2p better, etc.

Since I changed the DNS, I fired up uTorrent and left it running while I carried on. I seem to be browsing so much better. No lag and every page loads quick and as it should. Before, a couple of minutes of utorrent and my internet browsing was a right off. :D

Well your router is busy handling connections.. So yeah asking it to also go ask your isp for dns could be asking a bit much ;)

Also -- opendns is much better than many ISPs dns anyway.. Quite often the ISPs dns are undersized for how many users are hitting it, you will normally see much better response from opendns. They also provide many other features that your ISP does not.

Let it run for a while, and let us know.. Also a move from 20 to 70 on your upload pipe should give you way better download speeds on your torrents as well.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!