Wii Hacked To Run Copied Game Discs (without Modchip)


Recommended Posts

Hard proof's still thin on the ground with this one, so exercise caution, but it all looks reasonably solid. The clip above introduces the (not quite ready for release) Wii Backup Loader. Run from the Homebrew Channel, it lets you load modified ISO files on a DVD, so they'll play on your Wii. Or, yeah, to use less innocent-sounding terminology, it'll load pirated Wii games, so they'll play on your Wii.

Source: http://kotaku.com/5050343/wii-hacked-to-ru...pied-game-discs

Bad news for Nintendo this one.

All you need to get installed is the Homebrew Channel which just requires a copy of Zelda. No modchips/hardware modifying.

Looks like the Wii is going the way of the PSP on the piracy/homebrew side of things....

You can follow progress on GBATemp - http://gbatemp.net/index.php?showtopic=104722

(No the above site doesn't contain anything illegal, and posting anything on NW will be against the rules as well)

I've been using the homebrew channel to run homebrew for a while now. Apparently Waninkoko figured out a way to run game backups (assuming the story ends up being true). It was (is) only a matter of time....

....Oh and it figures that this is the first thing I see posted on neowin about the homebrew channel.

Edited by Ned
I've been using the homebrew channel to run homebrew for a while now. Apparently Waninkoko figured out a way to run game backups (assuming the story ends up being true). It was (is) only a matter of time....

....Oh and it figures that this is the first thing I see posted on neowin about the homebrew channel.

There has been topics posted about the Homebrew channel in the past, this isn't the first.

As for the news, awesome. I may just buy a Wii this xmas again for this :p. Do you need a certain version of Zelda to do the homebrew hack?

Zelda: Twilight Princess

apparently you just need that game, and an SD card.

Im sure its simple enough to google the instructions :)

What this does mean is no more risking a scratched Supper smash brothers brawl disk, that disks a BITCH for going wrong.

Nope. I believe Nintendo went the other way and tried patching it using a firmware update for the Wii instead and that has been patched now too. It is very simple. Took about 5 minutes to do.

I only did the homebrew channel the other day and now i am addicted to quake. I think the rumours are that we'll see this released in a couple of weeks.

I know it's talking about TP, but I mean does it need an unpatched release of the game. See those serial codes on the spine of the box? Those actually mean something :p

I actually don't know if TP was patched?

I'll get back to you.

It wasn't patched. Nintendo attempted to fix the problem with a firmware update (3.3) but they have got round that now too. I dunno if i can post a link to all the info/tutorial for it because it is probably a slightly grey area in the rules. The article doesn't mention at all about a certain version of TP, just that you need to have played the game at least once.

Firmware 3.3 still causes a few headaches with some homebrew stuff.

However there's a downgrader out there anyway to take you back to 3.2 which is what most people in the homebrew scene are using.

if you arent gonna play the whole game, just rent it then?

once you install the homebrew channel once, you wont need zelda again... everything can be done via that channel, and most (if not all) breweries are specifically using the channel.

anyway, just sent off my wii last week to get the laser fixed cos i bought SSBB from Morrisons the other day for ?15...

i wonder what they'll think when they see the Homebrew channel on my system, especially in the light of this new and unfortunate news. on the other hand, it gives some people the chance of experiencing Anubis II and Ninjabread Man without the regret of actually purchasing it at full price.

anyway, some of the homebrew is definately better than the games out there... Mahjongg actually keeps me occupied between bouts of Metroid Prime Echoes (almost finished it!) and Tanks!

Waninkoko abandons Wii ISO loader due to leak

The creator of the recently leaked Wii ISO loader has put up a message that he has abandoned the project due to the leak. His website reads "Congratulations! I don't care about who leaked Backup-Loader but now it's OFFICIALLY an abandoned project. Enjoy it."

Whoever this Waninkoko person is, they are a selfish prick.

Eh no.

Read up on the Wii scene and educate yourself on what "this person" has brought to us so far.

Then read the forums about the leak, enough little kids running around screaming to make you cry.

he gives it out to anyone who emails him then starts crying when someone leaks it, he shouldnt have expected random people on the internet to keep it internal for 2-3 weeks. tbh i dont see what the big deal is its not like fitting a wii chip is hard work now (no more soldering multiple wires) you can buy a wiiclip with presoldered chip for reasonable prices and they are supposed to be very easy to fit, loading of "backups" or games from other regions is probably much more reliable with a decent chip as well

Eh no.

Read up on the Wii scene and educate yourself on what "this person" has brought to us so far.

Then read the forums about the leak, enough little kids running around screaming to make you cry.

I know about the Wii Scene, and I know all about his work, hell I've used it quite frequently, but the fact is that this is the internet, pretty much everything gets leaked. You can't trust some 'beta' tester that's on your IM list and not know that it's going to be leaked.

Furthermore, I am not one of those whinging whiny people who cares if it gets released or not, the fact is that if for say Microsofts next Windows version got leaked and they just put out a big statement saying that they are not developing anymore because of a leak is stupid.

So this person is a selfish prick for building something for the wide scene community, and for some person to leak it, and him not carrying it on further. My guess is that he got stuck in the development process due to a major but in his IOS37 program. Did you read about that then?

But of course he is going to keep developing as much as he can though in my opinion. The Wii scene just has to cool down, and their attitude has to cool down aswell.

he gives it out to anyone who emails him then starts crying when someone leaks it, he shouldnt have expected random people on the internet to keep it internal for 2-3 weeks. tbh i dont see what the big deal is its not like fitting a wii chip is hard work now (no more soldering multiple wires) you can buy a wiiclip with presoldered chip for reasonable prices and they are supposed to be very easy to fit, loading of "backups" or games from other regions is probably much more reliable with a decent chip as well

Exactly, and yes I think it's easier to get a modchip, but the fact is that a softmod is much easier for some people. Hell, there is even some people testing out a Wii drive modification using a serial device connected to their PC.

I know about the Wii Scene, and I know all about his work, hell I've used it quite frequently, but the fact is that this is the internet, pretty much everything gets leaked. You can't trust some 'beta' tester that's on your IM list and not know that it's going to be leaked.

Furthermore, I am not one of those whinging whiny people who cares if it gets released or not, the fact is that if for say Microsofts next Windows version got leaked and they just put out a big statement saying that they are not developing anymore because of a leak is stupid.

So this person is a selfish prick for building something for the wide scene community, and for some person to leak it, and him not carrying it on further. My guess is that he got stuck in the development process due to a major but in his IOS37 program. Did you read about that then?

But of course he is going to keep developing as much as he can though in my opinion. The Wii scene just has to cool down, and their attitude has to cool down aswell.

I still don't understand how someone who makes free stuff, and has released a lot is selfish?

Maybe the guy is up himself a little for the no doubt "God like" status he's receiving by the scene, but if someone leaks his work on a small handed project (comparing this to a MS leak is ridiculous), and he gets ****ed off, it's understandable to an extent.

An unfinished loader getting out starts the spewing of immature comments from 14 year olds like "OMG ZUPER SMASH BROTHERZ DOESNT PLAY HELP ME?!11111" or "THIS LODERZ DOESNT WORK RIGHT, IT SUX!".

Just give it time, maybe he'll change his mind and/or others will carry on the work.

But to go around bitching at the guy because he's claiming for now a bit of code, with the only purpose to illegally play games, isn't being released properly, makes you sound like a desperate little pirate :laugh: (not necessarily aimed at you personally that comment, just anyone actually getting angry/worked up about this)

I still don't understand how someone who makes free stuff, and has released a lot is selfish?

Maybe the guy is up himself a little for the no doubt "God like" status he's receiving by the scene, but if someone leaks his work on a small handed project (comparing this to a MS leak is ridiculous), and he gets ****ed off, it's understandable to an extent.

Thats what I was getting at about the 'God like' status.

An unfinished loader getting out starts the spewing of immature comments from 14 year olds like "OMG ZUPER SMASH BROTHERZ DOESNT PLAY HELP ME?!11111" or "THIS LODERZ DOESNT WORK RIGHT, IT SUX!".

Yeah, reading GBAtemp just gave me a big headache.

Just give it time, maybe he'll change his mind and/or others will carry on the work.

Like I said, most likely this will happen.

But to go around bitching at the guy because he's claiming for now a bit of code, with the only purpose to illegally play games, isn't being released properly, makes you sound like a desperate little pirate :laugh: (not necessarily aimed at you personally that comment, just anyone actually getting angry/worked up about this)

I know, and I wasn't complaining or bitching, or getting up you either. For one, I'm really happy playing my WiiDoom :D The Homebrew Channel is the best channel so far :rofl:

Well it sounds like he might be back.

Talking to fellow developer Hermes, author of Guitarfun and Wiiengine, Waninkoko explains what got him so riled up (thanks to the translation from TehSkeen):

Waninkoko

It wasn't the leak what ****ed me off the most, but all the people downloading it, sharing it, making tutorials, and such. I recognize that 50% of that is my fault and... i think i'm gonna reconsider the cancelation (well, the bit about making it public because canceled it's not XD).

Hermes

Erm, i'm sorry to say, but i'll just give you two collejas XD . It is something that you should be VERY careful and not give away anything that carries your nick/name to ANYONE, not even the cat c'mon, that can give you trouble. Above all, it is your fault XD

As the post states, waninkoko is fortunately reconsidering coming back to the project, although I doubt he'll be sharing his codes with anyone anymore once he does.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No its not, there are ton of Youtube videos to get you started, what do you think people did before AI existed?
    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!