[Feedback needed] Atlas, the next version of Neowin


Recommended Posts

No! It's somewhat tiring to be called "wasteful" simply because we prefer to focus on a maximised browser on a big screen.

I like the current "choice" system that was put in place after a ton of users complained last time, I don't think it should be removed. :(

I respectfully disagree. Learn to work in a windowed environment. Maximising your web browser on a widescreen monitor when most websites are optimised for a width of 1024 pixels = wasting screen estate.

I want to use my screen fully, I don't want to make windows small just because the window manager supports it.

If I'm actually multi-tasking between apps then I'll have them as small windows, but otherwise they're going to be maximised.

No! It's somewhat tiring to be called "wasteful" simply because we prefer to focus on a maximised browser on a big screen.

I like the current "choice" system that was put in place after a ton of users complained last time, I don't think it should be removed. :(

The simple fact of the matter is, the front page will be fixed width, the forums will be fluid. There's no way for the server to know the width of your browser window and load enough content into the page to fill that additional width. This doesn't make such a difference on the forum where you're seeing an entire post, but with the way we display summaries on the front page, if we allow the page to get wider, we end up with a lot of whitespace that looks ugly, whereas we want to present a consistent look to all our users.

I respectfully disagree. Learn to work in a windowed environment. Maximising your web browser on a widescreen monitor when most websites are optimised for a width of 1024 pixels = wasting screen estate.

Why? I don't see the need to focus on 50 different windows at once or be able to see my lovely desktop picture and I don't see how maximising a window to get the most information on screen from that website without scrolling is "wasting screen estate"

It seems silly given that monitors are getting wider nowadays to have websites get slimmer.

In response to Davelegg, I understand the reasoning behind it but you got a shed load of bad feedback about it last time and it was changed, so it seems silly to try to force it through again.

Why? I don't see the need to focus on 50 different windows at once or be able to see my lovely desktop picture and I don't see how maximising a window to get the most information on screen from that website without scrolling is "wasting screen estate"

It seems silly given that monitors are getting wider nowadays to have websites get slimmer.

In response to Davelegg, I understand the reasoning behind it but you got a shed load of bad feedback about it last time and it was changed, so it seems silly to try to force it through again.

I guess it's a question of how you use your computer. I prefer to be able to see stuff like IRC, IM buddy list, (on Windows) some gadgets at all times. Also I use the desktop as clipboard replacement - if I want to keep a picture ro om a website or a scrap of text I drag it from the browser window to the desktop first and put it where it belongs later on.

Question to the developers: Are the forums also going to use Ignition as backend or are they going to remain on IPB (upgraded to version 3) with an Atlas-like skin?

Edited by Mephistopheles
It's not launching yet! Just a screenshot to get feedback

oh sorry neobond's post confused me lol

Now released to our paying Subscribers, interested to hear your feedback guys!

And YES NoAd Tier 2 subscribers won't have any ads on the main page! before you ask ;)

oh sorry neobond's post confused me lol

Before he only released the preview to the MVC's and the Staff. He just means he is now releasing the preview to the subscribers ;)

Question to the developers: Are the forums also going to use Ignition as backend or are they going to remain on IPB (upgraded to version 3) with an Atlas-like skin?

It'll be an Atlas skin on top of IPB3 for the time being. There's discussions about perhaps writing our own forum at some point but it's not a priority just now.

The good thing about Ignition is that its inherent support for extensibility cuts down on development effort significantly for changes to the front page, or writing plugins to support the forum etc. The current codebase of Neowin's news system is a product of its long history - bits bolted on here and there. Ignition's written from the ground up, quite literally. Exciting stuff :)

Suggestions and comments.

post-145229-1252853454_thumb.png

I agree with almost everything here besides the "bad colors" which didn't bother me. Some of the icons are a bit ambiguous or potentially superfluousness near the top but their use may become more apparent once we can use it.

I don't like how the tags are handled here an awful lot given you just have to look at the facebook one to see how easy it is for them to start forcing the accompanying text off to the side. Also I presume you would want to be able to give a topic multiple tabs, thus making that area cluttered fast. To be honest do you even need the tags on the front page? It should be obvious by reading the title what the article is about and given you aren't showing much of any article 75% of the time you have to expand it to see the rest so if the user is interested they will follow the link and can thus click on the tags in the article page itself.

Edited by Smigit

i have to say if i had my choise of the current page and the 'mock up' i would go with the current page =\

my biggest issue with the 'mock up' is the baby blue color instead of the dark blue.

also right now there is a google ad integrated into the header, which i think looks better than putting it between the header and the articles.

on a side note, i with the page had a dynamic width or similar, i have a 22" monitor so the page is no where close to filling the screen.

it looks nice not filling the screen, but it should take up a bit more.

I agree with almost everything here besides the "bad colors" which didn't bother me.

I don't know why so many people seem to dislike the lighter blue colour :/ I think it helps give the site a more professional look and feel. Maybe it's one of those 'you have to try it to see for yourself' things, I don't know, but I really do like it.

I don't like how the tags are handled here an awful lot given you just have to look at the facebook one to see how easy it is for them to start forcing the accompanying text off to the side. Also I presume you would want to be able to give a topic multiple tabs, thus making that area cluttered fast. To be honest do you even need the tags on the front page? It should be obvious by reading the title what the article is about and given you aren't showing much of any article 75% of the time you have to expand it to see the rest so if the user is interested they will follow the link and can thus click on the tags in the article page itself.

You are a tad mistaken, understandably, when you say "I presume you would want to be able to give a topic multiple tags, thus making that area cluttered fast," but to prevent confusion or misinformation, it'd be best if we wait for a developer to explain what is happening with that. I really love their idea for this and the way they have thought it through means the user will be able to realise what company, product etc the news is about without reading any of the article or title. As I say though, it's best if a developer explains what's going down with that. As for the Facebook tag, I'm more than confident it should not be that long - it was most likely a mistake made by the person who input the tags for the article (forgetting to seperate them with commas).

Awesome, iWant!

Now released to our paying Subscribers, interested to hear your feedback guys!

And YES NoAd Tier 2 subscribers won't have any ads on the main page! before you ask ;)

What? Where? Edited by NienorGT
You are a tad mistaken, understandably, when you say "I presume you would want to be able to give a topic multiple tags, thus making that area cluttered fast,"

Yeah wait and see, but surely if they are going to have an implementation of tags it makes sense to support multiple tags per an article. Look at any news site and usually multiple tags apply per an article. If you ignore that over sized facebook one and instead concentrate on something like "PS3". What if the article was one for a PS conference? In all likelyhood you would have PS3, PSP and PSN (Playstation Network) news all in the one article (maybe even "E3" or whatever for the conference itself). Yes you could label it "Sony" but you begin getting quite generic there and will be pulling up MP3 players and TV's if you search on it. Hell "Gaming" would probably be a more applicable tag than "Sony" in that case. Ultimatly a single tab, as the image depicts, seems a tad useless to me.

Now I'm only guessing (and they could be regarded as baseless guesses, don't get me wrong) and all there so maybe I'm way off and maybe thats not a tag in the same sense that I am used to them being used. We'll see I guess. I'd certainly like to know whats happening in that area but.

I think Dave would need to explain how the tag system will work, because in all honesty I don't quite understand it yet. AFAIK posters still need to manually add keywords to a news post, but I may be wrong here.

Yeah wait and see, but surely if they are going to have an implementation of tags it makes sense to support multiple tags per an article. Look at any news site and usually multiple tags apply per an article. If you ignore that over sized facebook one and instead concentrate on something like "PS3". What if the article was one for a PS conference? In all likelyhood you would have PS3, PSP and PSN (Playstation Network) news all in the one article (maybe even "E3" or whatever for the conference itself). Yes you could label it "Sony" but you begin getting quite generic there and will be pulling up MP3 players and TV's if you search on it. Hell "Gaming" would probably be a more applicable tag than "Sony" in that case. Ultimatly a single tab, as the image depicts, seems a tad useless to me.

Now I'm only guessing (and they could be regarded as baseless guesses, don't get me wrong) and all there so maybe I'm way off and maybe thats not a tag in the same sense that I am used to them being used. We'll see I guess. I'd certainly like to know whats happening in that area but.

I never said there was only going to be one tag per article :D I did say it's best to wait for a developer to explain the tagging system ;)

My post wasn't an attempt at an explanation of the system, it was merely just to let you know it's not going to be as bad as you think :happy: I really like the new system, but once a developer has explained everything about it, I'm sure anyone would welcome constructive criticism/suggestions :)

Essentially the tags are like they are now, but a article will have one main tag as you can see, Say "Apple", "Microsoft" or "Sony" which will be shown, but each article will still be tagged with a good few more.

So say "Sony", "Playstation", "PS3" etc etc. and from my knowledge its highly customizable on your end for viewing and mixing tags too.

No doubt I've over simplified it and DaveLegg will come in and tell me off for not being correct or telling you about the awesome planet destroying power behind the new system. :p

But it is very cool.

My post wasn't an attempt at an explanation of the system, it was merely just to let you know it's not going to be as bad as you think :happy: I really like the new system, but once a developer has explained everything about it, I'm sure anyone would welcome constructive criticism/suggestions :)

Heh no worries

I don't like how the tags are handled here an awful lot given you just have to look at the facebook one to see how easy it is for them to start forcing the accompanying text off to the side. Also I presume you would want to be able to give a topic multiple tabs, thus making that area cluttered fast. To be honest do you even need the tags on the front page? It should be obvious by reading the title what the article is about and given you aren't showing much of any article 75% of the time you have to expand it to see the rest so if the user is interested they will follow the link and can thus click on the tags in the article page itself.

Each article will be given multiple tags, separated by commas, but only the first one entered will show on the front pager. The others will be displayed below the story on the page where you view the full article. If you look earlier in the thread, you'll find a post where I explained about how you can customise the news you see on the front page by choosing a list of tags of the news you wish to view. You can also get an RSS feed for this custom view.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
    • is that a personal preference? whether it is or isn't, i get where you're coming from. i try to get and use fully open sourced applications whenever i can but there are instances where i find a superior product that is closed sourced. in these cases i do my best to learn about the company, who operates it, their background, parent and sub structure etc. to some extent, depending on "the smell test". i really believe that Syncback is really and truly something great. even if you don't use it, it's always worth a recommendation to someone else, especially if that someone else is not very computer literate. for someone of your calibre you, you'll manage just fine with Syncthing, no doubt about it.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!