Recommended Posts

I'm currently looking in stores inside of the Netherlands :p Since they do not have that Gunpla yet, I'll have to wait a bit longer for it unfortunately.

Edit: Crap, I found a store in the Netherlands that actually has the EW version but it's not the Hell Custom one :| How can I make a choice now!

I'll be getting the Shinanju for sure. I've been wanting it for over a year now so it's the perfect time :p

I'm currently looking in stores inside of the Netherlands :p Since they do not have that Gunpla yet, I'll have to wait a bit longer for it unfortunately.

Edit: Crap, I found a store in the Netherlands that actually has the EW version but it's not the Hell Custom one :| How can I make a choice now!

I'll be getting the Shinanju for sure. I've been wanting it for over a year now so it's the perfect time :p

Get the Hell Custom One. It has a wing cloak :D

Nice! It will be pretty small though as it's a 1/144. But it's a great way to start.(Y)

Get the Hell Custom One. It has a wing cloak :D

I know, but they do not have that one :p Plus the non-hell custom version looks pretty awesome too. And I need that 00 Raiser 1/100 MG!! :p

The Hell Custom version looks really great! If only the store had that version, LOL. Also it's nice to see how 00 Gundam has a sticker on the left leg and not on the right one, which the 00 Qan[T] also has.

I am also able to get the MSN-18E Kampfer. Btw, that Deathscythe MG 1/100 is the one you posted on page 8 :) Right, I guess I'll pick my mobile suits later in the afternoon.

The Sinanju has loads of annoying decals, lol. 00 Qan[T] has a couple of similar decals so I'm bound to have a long decal session, once I get it :p

Sorry for the triple post :p Anyways, here's my Gundam 00 Qan[T]:

IMAG0030.jpg

IMAG0031.jpg

IMAG0034.jpg

IMAG0032.jpg

IMAG0035.jpg

As you can see in the 3rd photo, there's a bit of glue on the GN Drive chassis. I'm not able to remove it unless I actually really want to be giving out money just for the white part and the chassis. Besides that mishap I'm really happy with this model. The green translucent bits on the shields actually reflect green-ish light onto the mobile suit when there's a fair amount of light being thrown upon it. Looks pretty awesome to be honest :D

The chest piece has a sticker behind it with 000 and some info about the MS written underneath that. Though the green translucent piece also has 000 engraved inside of it which has been done for the LED mod. If you'd use the LED mod, you'd have to remove the stickers from both the front of the chest piece, and the back part of the GN Drive. There's a rub-on decal for the back of the GN Drive which is to be used in conjunction with the LED mod.

Also, I hate the camera on my HTC Desire... I was able to take way better shots with my older W995 and I could even take shots in the evening with it. I don't feel like shutting down my HTC Desire to take some shots though :p As the W995 needs my Vodafone SIM to be able to operate.

I am also able to get the MSN-18E Kampfer. Btw, that Deathscythe MG 1/100 is the one you posted on page 8 :) Right, I guess I'll pick my mobile suits later in the afternoon.

The Sinanju has loads of annoying decals, lol. 00 Qan[T] has a couple of similar decals so I'm bound to have a long decal session, once I get it :p

Wait so which kits are you picking up? the Kampfer, Deathscythe and the Sinanju? :o

btw, bout time you posted the Qan[T] :laugh: It looks sweet. How is the GN drive glow on it?

If I can, I really want to pick up the Strike Freedom EBM. It's a kit I've been not trying to get because of how expensive it is. Although I did get Destiny EBM for like $120 put still a lot.

Not sure which to pick. The amount of decals which the Sinanju has.. I rather wait with buying that one till summer. For the time being, I replaced that with Infinite Justice and another MG. Not sure which the latter will be :p

The GN Drive doesn't glow as it needs the LED mod. I don't really want to have a LED in there tbh, as I'd be switching batteries every now and then and the GN Drive is hard to take out in one bit as the back just gets out without the front.

That version of Destiny Gundam is only ? 87,00. Same goes for Strike Freedom EBM, which looks awesome.

Don't you agree though that the MG version of MSN-18E Kampfer (this one has custom paint on it etc., so mine won't look like that lol) looks bloody awesome? :D

Yeah get the Kampfer. Although I'm not a fan of the design though. I always for some reason look a bit down on Goufs and their variations. They are just not as epic as real Gundams. But then that's me. lol.

True that :p But the enemy mobile suits have great designs too, haha :p That's the reason why I build these Gunpla models, the ones with great designs. Doesn't matter to me if it's a Gundam or an enemy suit :p Though the mobile suits from the enemies rarely get MG 1/100 treatments.

A forbidden image? :p

GN-X MG 1/100. The images you mean is a personal mod. I'd like to have it too, but it should also be available in the Netherlands.

capture.png

There's still loads of Gunpla's that I'd like to have, but they're just not available in the Netherlands yet.

I'm sure about that too, lol. Though that ain't the Netherlands :p Though it would add a amount of money to the actual price of the Gunpla model, which would make it more expensive then it actually is. Plus, if I'd order one outside of the Netherlands, I'd have to wait more then a day to be able to build it. If I order them in the Netherlands, I only have to pay ?6,50 for delivery costs and I'll be able to have it the day after ordering it.

This topic is now closed to further replies.
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!