Xbox 360 System Update Preview


Recommended Posts

So the only people that should get bricks are people that shouldn't have the disc anyway right? Also, is it actually "bricked" or just cannot connect to XBL?

They can't connect to XBL until the update is released to general public. Limited bricks if you will :p

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

I didn't notice anything either. The Beta tab is still there but is just info nothing else. Plus... Halo:Reach... for the 30 minutes I played it, kind of sucks. :pinch:

You don't get banned, you just won't be able to connect to Xbox Live until the update goes public.

Yeah, seems to me they have a backend authentication when connecting to XBL and unless your console is on the approved list, XBL can't connect with the newer software.

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

Yes the update was on the disc. You won't notice anything as its a firmware update to allow the Xbox to read the new format. That's all we're testing.

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

If you were a disc tester, then you would have gotten a full system update when you put in the disc, and it would be very noticeable. It doesn't change anything about the look and feel of the system other than the beta tile, but you would certainly know that it had installed because it would take several minutes to update, as well as restart your Xbox.

Yes the update was on the disc. You won't notice anything as its a firmware update to allow the Xbox to read the new format. That's all we're testing.

Well, we don't really know for sure... we could end up testing more, but it's doubtful.

I didn't notice anything either. The Beta tab is still there but is just info nothing else. Plus... Halo:Reach... for the 30 minutes I played it, kind of sucks. :pinch:

yup.

last helo I played was ODST and it seemed better than this...

So the "all we're tseting is this" part isn't quite true. There's two differences off the bad that I've already noticed.

1. The Recover Gamertag option now requires that you enter both your gamertag and your email address, whereas before it was only email address (and password, obviously)

2. Progress bars are now charcoal gray rather than the old flat green that they were before.

Not sure what else there might be that I haven't noticed, but yeah. Just those so far.

1. The Recover Gamertag option now requires that you enter both your gamertag and your email address, whereas before it was only email address (and password, obviously)

That used to always be the case, I think they changed it to just email / password when the dash was updated for Kinect.

I did like it better been just been email / password, I see no reason why you would need to enter the gamertag as you can only associate one per email address.

I still have not gotten anything from microsoft and I'm in the program. Which department of Microsoft would I contact about this? XBL or connect?

Neither.

If you have not received the disc, please be patient. Distribution dates will be provided as part of the program announcements.

That's in the FAQ - Console Management on MS Connect

Is it just me, or does Reach seem to now take an incredibly, incredibly, super long time to load. I had never finished the SP campaign, so I put the disk in and went to play it, and it literally took over 2 minutes to create the SP game? That one screen where it shows the lobby, game type, and basically creates the SP game for you. I am wondering if it has something to do with the new disk format, or if it is just an isolated incident on my end and no one elses?

And FTR, I thought maybe it was just a first time thing, so I quit the game completely, restarted the 360, fired up the game, and same deal. Took over 2 minutes to create the SP campaign game.

I also noticed I still had the same issue I always had, which was just specific to reach. Sound cuts out completely for a second or two randomly. Does not seem to be any specific sound that causes it to happen, just now and then sound cuts out completely. No rhyme or reason either. Can go 10 minutes without it happening, then it will happen 4 times in a minute, then 20 minutes without it happening, then 1 time in 10 minutes. Just weird. I will pay more attention, maybe it is a specific sound.

Is it just me, or does Reach seem to now take an incredibly, incredibly, super long time to load. I had never finished the SP campaign, so I put the disk in and went to play it, and it literally took over 2 minutes to create the SP game? That one screen where it shows the lobby, game type, and basically creates the SP game for you. I am wondering if it has something to do with the new disk format, or if it is just an isolated incident on my end and no one elses?

And FTR, I thought maybe it was just a first time thing, so I quit the game completely, restarted the 360, fired up the game, and same deal. Took over 2 minutes to create the SP campaign game.

I also noticed I still had the same issue I always had, which was just specific to reach. Sound cuts out completely for a second or two randomly. Does not seem to be any specific sound that causes it to happen, just now and then sound cuts out completely. No rhyme or reason either. Can go 10 minutes without it happening, then it will happen 4 times in a minute, then 20 minutes without it happening, then 1 time in 10 minutes. Just weird. I will pay more attention, maybe it is a specific sound.

SP always took quite a while to load for me. Dunno what to say about your sound issue.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Subtitle Edit 5.0.0 by Razvan Serea Subtitle Edit is a powerful, free, and user-friendly subtitle editing tool designed for creating, editing, and converting subtitles for videos. It supports a wide range of subtitle formats, including SRT, ****, and SUB, allowing users to easily modify and adjust subtitles for accurate timing and formatting. With its intuitive interface, Subtitle Edit provides a variety of features such as waveform audio display, spell-check, subtitle synchronization, and real-time video preview, making it an ideal choice for both beginners and professionals. The software also includes powerful tools for batch processing, translating subtitles, and converting between different subtitle formats. Subtitle Edit features: Create/adjust/sync/translate subtitle lines Convert between SubRib, MicroDVD, Advanced Sub Station Alpha, Sub Station Alpha, D-Cinema, SAMI, youtube sbv, and many more (300+ different formats!) Cool audio visualizer control - can display wave form and/or spectrogram Video player uses mpv, DirectShow, or VLC media player Visually sync/adjust a subtitle (start/end position and speed) Audio to text (speech recognition) via Whisper or Vosk/Kaldi Auto Translation via Google translate Rip subtitles from a (decrypted) dvd Import and OCR VobSub sub/idx binary subtitles Import and OCR Blu-ray .sup files - bd sup reading is based on Java code from BDSup2Sub Can open subtitles embedded inside Matroska files Can open subtitles (text, closed captions, VobSub) embedded inside mp4/mv4 files Can open/OCR XSub subtitles embedded inside divx/avi files Can open/OCR DVB and teletext subtitles embedded inside .ts/.m2ts (Transport Stream) files Can open/OCR Blu-ray subtitles embedded inside .m2ts (Transport Stream) files Merge/split subtitles Adjust display time Fix common errors wizard....and more. Subtitle Edit 5.0.0 changelog: Subtitle Edit 5 is a major new release and a big step for the project. For the first time, Subtitle Edit runs natively on Windows, macOS, and Linux from a single, modern, cross-platform codebase. The builds are self-contained, so no separate .NET installation is required, and on macOS and Linux the needed media components (mpv/ffmpeg) are bundled in. Please read before upgrading: Subtitle Edit 5 is a new application, not just an update of Subtitle Edit 4. It has been rebuilt from the ground up to be cross-platform, so: It is not 100% the same app. The look, layout, and some workflows have changed. Some things are in different places, and a few behave differently than in SE4. Not every SE4 feature exists in SE5 yet. SE5 covers all the core editing, conversion, sync, video playback, OCR, and online services, but some of the more specialized SE4 tools are not available yet. Features will continue to be added. If you rely on a specific SE4 feature that is missing, please keep SE4 installed alongside SE5. The easiest way to run both side by side is to use the Portable versions of SE4 and SE5, which keep their settings separate and do not interfere with each other. Which version should I use? Subtitle Edit 5: recommended for most users on Windows 10 (22H2) or newer, macOS 12+, and Linux. Subtitle Edit 4: please continue to use SE4 if you are on an older Windows version (Windows 7/8), or on older / slower computers where SE5 may not run well. SE4 remains available and is the right choice in those cases. To run SE4 and SE5 at the same time, use the Portable versions - you can try SE5 while keeping SE4 as a fallback. Download: Subtitle Edit 5.0.0 | ARM64 | ~60.0 MB (Open Source) Download: Subtitle Edit Portable | 103.0 MB View: Subtitle Edit Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Google Pixel 11 series: Here's what to expect by Hamid Ganji Google Pixel 10 series In recent years, Google has successfully turned its Pixel devices into worthy contenders in the smartphone market. The search giant is now preparing to launch the Pixel 11 series in just a few months, and many Pixel fans are likely wondering what Google has in store for them this year. The next lineup of Google smartphones includes four devices: the Pixel 11, Pixel 11 Pro, Pixel 11 Pro XL, and Pixel 11 Pro Fold. This year, we don’t expect Google to bring revolutionary upgrades to its handsets, and the Pixel 11 series is likely to receive modest hardware improvements alongside a slew of AI-powered features. Here are the rumored specifications of the Google Pixel 11 series ahead of its official debut: When will the new Pixel phones be unveiled? The last two generations of Google Pixel phones (Pixel 9 series and Pixel 10 series) were launched in August, unlike the previous three generations that debuted in October. With that in mind, we expect Google to unveil the Pixel 11 series sometime in August 2026. The exact launch date has yet to be confirmed. Google Pixel 11 CAD renders - Image via AndroidHeadlines How much will the Pixel 11 series cost? Predicting the final price of upcoming smartphones has become increasingly difficult. As you may know, RAM and memory prices are rising sharply, leading to significant increases in the cost of consumer electronics. Recently, Apple CEO Tim Cook said that price increases for some future Apple products are unavoidable, suggesting that the iPhone 18 series could become more expensive. Google has remained tight-lipped about any potential price increases for the Pixel 11 series. If the company manages to maintain last year’s pricing structure, here’s what the lineup could cost: Pixel 11: $799 Pixel 11 Pro: $999 Pixel 11 Pro XL: $1,199 Pixel 11 Pro Fold: $1,799 Given current market conditions, it may be difficult for Google to avoid raising prices unless it adopts cost-saving measures, such as equipping the base model with 8GB of RAM. Google Pixel 11 series anticipated specs: We expect the Google Pixel 11 series to debut with a new Tensor G6 processor as well as an upgraded camera system. The overall design, however, is expected to remain largely unchanged across the lineup. Specifications Pixel 11 Pixel 11 Pro Pixel 11 Pro XL Pixel 11 Pro Fold Display 6.3-inch LTPO AMOLED / 120Hz refresh rate / up to 3100 nits of brightness 6.3-inch Super Actua LTPO OLED, 120Hz refresh rate, up to 3600 nits of brightness 6.8-inch Super Actua LTPO OLED, 120Hz refresh rate, up to 3600 nits of brightness 8-inch inner screen and 6.4-inch outer display, 120Hz refresh rate, up to 3600 nits of brightness RAM & Processor Tensor G6 / 8-12GB of RAM Tensor G6 / 12-16GB of RAM Tensor G6 / 12-16GB of RAM Tensor G6 / 16GB of RAM Storage options 128GB or 256GB 256GB, 512GB, 1TB 256GB, 512GB, 1TB 256GB, 512GB, 1TB Camera 50MP main sensor, 13MP ultra-wide, 10.8MP 5x telephoto, 10.5MP front camera 50MP main camera, 48MP ultra-wide, 48MP telephoto with 5x optical zoom, 42MP selfie camera 50MP main camera, 48MP ultra-wide, 48MP telephoto with 5x optical zoom, 42MP selfie camera 50MP main camera, 10.5MP ultra-wide camera, 10.8MP telephoto camera, 10MP front camera, 10MP inner camera Battery 4,840 mAh 4,707 mAh 5,000 mAh 4,658 mAh Software Android 17 Android 17 Android 17 Android 17 The Pixel 11 series won’t be a major departure from its predecessor, with Google instead focusing on subtle improvements and AI additions such as Gemini Intelligence. However, a patent filed by Google suggests the company is working on a removable battery for its smartphones, and we could see this feature make its way to the Pixel 11 Pro Fold. Given that nearly all smartphones today lack removable batteries, such a feature would be a welcome addition to future Pixel devices. That said, it may not arrive with this year’s lineup after all, and the final decision is yet to be made by Google. The Pixel 11 series could also face an uphill battle in the market. In the Android segment, Samsung is performing well with the Galaxy S26 series, while the Galaxy Z Fold 8 lineup is also expected to launch next month. On the other hand, Apple is preparing to unveil the iPhone 18 Pro and iPhone 18 Pro Max in September alongside its first foldable iPhone.
    • At least AMD is still taking Windows 10 seriously (after the oops) before it consumer extended support ends. @WaltC - Memories, 2x Voodoo in SLI with a Riva TNT with an Aureal A3D soundcard.
    • So size is the ONLY selling point????? People have been plugging in PC's to TV's in living rooms for 20+ years. I would take a bigger box for more peformance. Also lot and lots of SFF/Mini ITX build guides out there.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!