Xbox 360 System Update Preview


Recommended Posts

So the only people that should get bricks are people that shouldn't have the disc anyway right? Also, is it actually "bricked" or just cannot connect to XBL?

They can't connect to XBL until the update is released to general public. Limited bricks if you will :p

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

I didn't notice anything either. The Beta tab is still there but is just info nothing else. Plus... Halo:Reach... for the 30 minutes I played it, kind of sucks. :pinch:

You don't get banned, you just won't be able to connect to Xbox Live until the update goes public.

Yeah, seems to me they have a backend authentication when connecting to XBL and unless your console is on the approved list, XBL can't connect with the newer software.

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

Yes the update was on the disc. You won't notice anything as its a firmware update to allow the Xbox to read the new format. That's all we're testing.

I don't see any difference, does anyone can confirm that the update was on the disk. And just for curiosity what did the update do??

If you were a disc tester, then you would have gotten a full system update when you put in the disc, and it would be very noticeable. It doesn't change anything about the look and feel of the system other than the beta tile, but you would certainly know that it had installed because it would take several minutes to update, as well as restart your Xbox.

Yes the update was on the disc. You won't notice anything as its a firmware update to allow the Xbox to read the new format. That's all we're testing.

Well, we don't really know for sure... we could end up testing more, but it's doubtful.

I didn't notice anything either. The Beta tab is still there but is just info nothing else. Plus... Halo:Reach... for the 30 minutes I played it, kind of sucks. :pinch:

yup.

last helo I played was ODST and it seemed better than this...

So the "all we're tseting is this" part isn't quite true. There's two differences off the bad that I've already noticed.

1. The Recover Gamertag option now requires that you enter both your gamertag and your email address, whereas before it was only email address (and password, obviously)

2. Progress bars are now charcoal gray rather than the old flat green that they were before.

Not sure what else there might be that I haven't noticed, but yeah. Just those so far.

1. The Recover Gamertag option now requires that you enter both your gamertag and your email address, whereas before it was only email address (and password, obviously)

That used to always be the case, I think they changed it to just email / password when the dash was updated for Kinect.

I did like it better been just been email / password, I see no reason why you would need to enter the gamertag as you can only associate one per email address.

I still have not gotten anything from microsoft and I'm in the program. Which department of Microsoft would I contact about this? XBL or connect?

Neither.

If you have not received the disc, please be patient. Distribution dates will be provided as part of the program announcements.

That's in the FAQ - Console Management on MS Connect

Is it just me, or does Reach seem to now take an incredibly, incredibly, super long time to load. I had never finished the SP campaign, so I put the disk in and went to play it, and it literally took over 2 minutes to create the SP game? That one screen where it shows the lobby, game type, and basically creates the SP game for you. I am wondering if it has something to do with the new disk format, or if it is just an isolated incident on my end and no one elses?

And FTR, I thought maybe it was just a first time thing, so I quit the game completely, restarted the 360, fired up the game, and same deal. Took over 2 minutes to create the SP campaign game.

I also noticed I still had the same issue I always had, which was just specific to reach. Sound cuts out completely for a second or two randomly. Does not seem to be any specific sound that causes it to happen, just now and then sound cuts out completely. No rhyme or reason either. Can go 10 minutes without it happening, then it will happen 4 times in a minute, then 20 minutes without it happening, then 1 time in 10 minutes. Just weird. I will pay more attention, maybe it is a specific sound.

Is it just me, or does Reach seem to now take an incredibly, incredibly, super long time to load. I had never finished the SP campaign, so I put the disk in and went to play it, and it literally took over 2 minutes to create the SP game? That one screen where it shows the lobby, game type, and basically creates the SP game for you. I am wondering if it has something to do with the new disk format, or if it is just an isolated incident on my end and no one elses?

And FTR, I thought maybe it was just a first time thing, so I quit the game completely, restarted the 360, fired up the game, and same deal. Took over 2 minutes to create the SP campaign game.

I also noticed I still had the same issue I always had, which was just specific to reach. Sound cuts out completely for a second or two randomly. Does not seem to be any specific sound that causes it to happen, just now and then sound cuts out completely. No rhyme or reason either. Can go 10 minutes without it happening, then it will happen 4 times in a minute, then 20 minutes without it happening, then 1 time in 10 minutes. Just weird. I will pay more attention, maybe it is a specific sound.

SP always took quite a while to load for me. Dunno what to say about your sound issue.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      466
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!