Recommended Posts

Thanks for the reply! I see, what a bummer :( What I haven't understood this far, if I disable directwrite, do I lose the HA or not? :pinch:

You should be able to disable

gfx.font_rendering.directwrite.enabled

to just disable directwrite, and still have layers enabled.

Highlight the domain name in the address bar

https://bugzilla.mozilla.org/show_bug.cgi?id=451833

will be in tomorrow's nightly!

edit:

it's in latest hourly:

http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds/mozilla-central-win32/1304433556/firefox-6.0a1.en-US.win32.zip (win32)

but there's not enough contrast IMO

51828860.png

What is the point of this?

You should be able to disable

gfx.font_rendering.directwrite.enabled

to just disable directwrite, and still have layers enabled.

Thanks again! The thing is, it does not work :pinch: I set it to disabled and nothing changed. Then to be sure I made a new profile and

gfx.font_rendering.directwrite.enabled

was by default set to disabled. Just to say what I want to do, I use Win7 with GDI++ to enhance my fonts, unfortunately, ever since Firefox 4 GDI++ wont apply anymore to it. So my goal is to retain HA and let GDI++ handle the fonts^^

What is the point of this?

Its sort of a security feature to help protect the more novice users from phishing. Some phishing sites will try to make their urls look similar to the legit site, for example: neowind.tz/neowin.net/forums/132q12413/ vs neowin.net. It makes it easier to tell if you are on the fishy site.

Thanks again! The thing is, it does not work :pinch: I set it to disabled and nothing changed. Then to be sure I made a new profile and

gfx.font_rendering.directwrite.enabled

was by default set to disabled. Just to say what I want to do, I use Win7 with GDI++ to enhance my fonts, unfortunately, ever since Firefox 4 GDI++ wont apply anymore to it. So my goal is to retain HA and let GDI++ handle the fonts^^

In that case even if you used the new settings that landed in the nightlies, GDI++ still would not be handling the fonts. The just let you tweak directwrite's font rendering to make it look more like the classic cleartype rendering, directwrite still handles the font rendering. You may have to try turning off hw acceleration completely in the options.

In that case even if you used the new settings that landed in the nightlies, GDI++ still would not be handling the fonts. The just let you tweak directwrite's font rendering to make it look more like the classic cleartype rendering, directwrite still handles the font rendering. You may have to try turning off hw acceleration completely in the options.

Ahh okay, that explains it, thanks! I will just live without GDI++ for FF4, losing HA isn't worth it imo^^

I'd strongly suggest getting used to it (by trying it, etc.) DirectWrite is the new font rendering API Microsoft want people to use, so Firefox, IE9, Steam, etc. are just the beginning of the trend. And unlike Steam and Firefox, most apps won't let you just randomly disable it.

You should be able to disable

gfx.font_rendering.directwrite.enabled

to just disable directwrite, and still have layers enabled.

You need to disable Direct2D, you can't mix and match them (that preference only controls forcing DirectWrite on when you're doing software rendering.)

^Fair enough. I've enabled it now and I'll be testing it for a day. To me it doesn't look as good as when I have it disabled :s

Edit: This might be a placebo effect but, did they change the way DirectWrite renders the font? Cause it looks different compared with the last time that I tried it out. Also, I can see the red and blue channels in the fonts way to easy. Is there any way that I can change this?

Yeah, they adjusted it slightly to match the way IE renders. (Basically, it ignores the default API settings, unless a user has run the ClearType Tuner) The preference "gfx.font_rendering.cleartype_params.enhanced_contrast" governs that behaviour (I think the old default was 0.5 or something)

I did run ClearType Tuner in Windows 7. But I don't feel like changing it only so that the text in Firefox looks better. If I'd do that, the text outside of Firefox will look bad.

I'll just use it a day and see how I feel about it tomorrow.

erm , yeah ie9 is faster coz of dropping support for xp and not coz of some chakra (or dead code elimination :shiftyninja: ) , so yeah xp is the one to blame :)

attachment.cgi?id=525501

Some new stuff regrading the branches :D

reshack and I got that **** the same. So, whats the point? :laugh:

Tell us what does the error window say so we can figure out what may be the problem?We are not fortune tellers.

PS:Most likely it is a broken addon.

Sorry, I should have said 'Mozilla Crash Reporter' not 'error window'. I updated to the latest nightly and it still crashes so it might be an add-on incompatibility.

EDIT: I've got it running in safe mode now so I will narrow down the possibilities.

EDIT 2: Fixed the problem. One of my add-ons was responsible so I disabled it and everything is working again (thanks for the suggestion kilara)

Highlight the domain name in the address bar

https://bugzilla.mozilla.org/show_bug.cgi?id=451833

will be in tomorrow's nightly!

edit:

it's in latest hourly:

http://ftp.mozilla.org/pub/mozilla.org/firefox/tinderbox-builds/mozilla-central-win32/1304433556/firefox-6.0a1.en-US.win32.zip (win32)

but there's not enough contrast IMO

51828860.png

Looks like they don't have everything worked out with this yet: http://espn.go.com/

They just have go.com highlighted and not espn, like Chrome normally would have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • How about a global switch to turn the awful things off instead of a registry hack? Then everyone wins.
    • This doesn't strike me as so shocking when... " IT admins do have some control over this rollout. If they choose to opt out, devices in their tenant won't automatically get the dreaded Copilot app"
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      PsYcHoKiLLa
      257
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!