• 0

Graphic Request Thread


Question

Please pin this and post all requests graphic related here - be it internet banners, avatars, sigs - you name it, just post them here and i, or the helpful neowin grpahics team will hopefully get to it... :D

Thread title edited, this is not an "offcial" request thread and not the only one, people may still make request threads, otherwise they would get buried in here. Thanks for understanding

Edited by Blaise
Link to comment
https://www.neowin.net/forum/topic/99064-graphic-request-thread/
Share on other sites

Recommended Posts

  • 0

you any good at wallpapers wing? i need a close up of an office wall, maybe with part of a desk, a plant and most importantly, quite a large space on the wall. sounds weird i know, but that's what i'd really like. if ya don't do wallpapers, just shout at me, i don't mind. :)

  • 0

I would love a sig and avatar, Nothing specific, just be creative because everyone here has good taste, But i would like my Netgex in it and a space for my comp specs, Maybe something with like a grid in the background, I like blues. A simple logo, I like the glassy effect.

Anything is cool

  • 0

Can I Please request a Logo 200px by 91px for use on a phpBB forum i wish for it to say Linux-Australia (i would also like the PSD Just in case i have to there is a a chance i will) and have a picture of tux on it any colours will do TIA dewy?

  • 0
My apologies. You are absolutely right. If I'd read properly I would have seen that you already had. My apologies again for being so quick to leap.

Its cool. I was just in a bad mood. I miss things too. I'm sorry if I sounded like a dick.

DreamCaster, I think that will do fine. Thanks!

  • 0

alright guys here is what i am needing. I have a logo i found and i just basically need some stuff changed.

http://www.studio1webdesign.com/images/fps_logo.gif

there is the link to the picture. I would like it to say "Ground Zero" in replacement for the top text and "Development" as the lower text. I would like it a bit bigger as well if possible so i could resize it as needed. If i could get the PSD/PSP files that would be great, and if at all possible the lightning bolt needs to be on its own layer. Thanks a lot and i appreciate it.

  • 0
Try this:

Grab me on Messenger and let me know where you want to go from here. We can adjust any of the layers, text, colours, etc.

http://homepage.ntlworld.com/vbmedia/public/tec-public.jpg

Sorry for late reply.

So it will match in with this site - http://standalone.estratospherehosting.com/rizla/new3.php

  • 0
Well Done, you seem to be keeping everything under control, well done peeps.

JMann

Grrr. You're doing it again. Patronising.

This isn't a factory where people place orders and we all churn out graphics under your guidance. Well, I certainly don't anyway. (I defend nothing like I defend my individuality.)

Now there may well be some historic moment here which I missed, being a relative newcomer and all that, but please, I for one can do without the patronising pat on the head unless it is absolutely required for some bizarre reason.

I 'try' to consider people's ages here when posting. I would ask that you perhaps consider the same thing. I'm 34 for Christ sake! lol

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!