Apple Restricts Hard Drive Replacements on New iMacs


Recommended Posts

You shouldnt HAVE to buy Apple Care just to get peace of mind, so after gouging you for the cost of a machine you then have to spend another ?150 just so you arent stuck with a useless machine when it inevitably breaks. My old PC was nearly 5 years old, a part breaks and if its out of warranty i can go buy the cheapest relatively specced peice of hardware.

All-in-ones are in a completely different class from towers. All-in-ones are far more akin to notebooks, and the engineering of the iMac reinforces that fact. The HDD breaking is?honestly the least of your worries. There are far more expensive components in that iMac that are completely irreplaceable by the user. Replacing the HDD in one of these just means you might have to do some terminal hacking to control the fan speed.

Paying ******** for warranty is smart? Ok, no comments necessary. They made this stuff right for you. They care for you.

And Macs do not break anyway, because they're pricey and that must mean quality. Or you're using it wrong.

/s

If you're going to have the machine for more than a year, then yes, AppleCare is a smart investment. Would you get an extended warranty for a laptop? If yes, then you should get an extended warranty for an all-in-one. If no, well, good luck to you.

All-in-ones are in a completely different class from towers. All-in-ones are far more akin to notebooks, and the engineering of the iMac reinforces that fact. The HDD breaking is?honestly the least of your worries. There are far more expensive components in that iMac that are completely irreplaceable by the user. Replacing the HDD in one of these just means you might have to do some terminal hacking to control the fan speed.

Theres no reason for it to be Aluminium unibody, Apple could have put a removeable back panel for access but then Apple have always been form over function. Most notebooks apart from Apple have removeable panels to get access to Ram, HDD, Wifi card etc..

Theres no reason for it to be Aluminium unibody, Apple could have put a removeable back panel for access but then Apple have always been form over function.

Wow, it has nothing to do with the unibody enclosure and everything to do with parts being non-standard shapes and sizes. Just as an example, the graphics daughterboard looks nothing like what you'd put in a standard tower. The only similarity is that it's connecting into a PCI slot.

Did you even read the original post?

They changed the power connector to non-standard one. I was saving up for a mac so it would have been a Sandybridge one i bought......

It's the temperature sensor, not the power connector. In other words, you can still run the iMac. The fans will just be going at full blast.

Wow, it has nothing to do with the unibody enclosure and everything to do with parts being non-standard shapes and sizes. Just as an example, the graphics daughterboard looks nothing like what you'd put in a standard tower. The only similarity is that it's connecting into a PCI slot.

Of course it does, they make sacrifices so they can make it ".....ohhhhhhhh LOOK AT THE SHINY SHINY". I accept that the GPU isnt a standard GPU just like notebooks but notebooks have replaceable CPUs, RAM, PCI-E slot for different types of cards, HDD, Optical Drives, etc.. Apple dont allow you to do it so they can make it thin.

Poor Apple users. Buy the extended warranty...Apple Care...and waste even more of your money. I NEVER EVER buy extended warrantys for personal. Why? Because of the HD, video, nic...in a PC goes bad, I can fix it myself for cheaper than a warranty. Sad part is, this wont steer people away from buying Apple/Macs. They see shiny and like a deer in the headlights...

Just another way for the greedy Apple to get more money. Now people are going to get worried and spend more money buying Apple care. Apple is laughing their asses off on the way to the bank and people are just taking it.

I'd love to see where you got this information from. Generalise much?

Pretty much. iMacs aren't cheap!

Fair enough, I generalised in that comment, but I know quite a lot of Mac owners and when asked if they mind the extra cost of Apple hardware products, they don't seem to care. Either it's because they like the brand so much they're willing to fork out that little bit extra, or some other reason. One example is a friend of mine who isn't loaded, yet has a 27" iMac with bluetooth keyboard, Magic Trackpad, Time Capsule and a Magic Mouse. I honestly don't know where this money is coming from but it does go to show the kind of dedication Apple consumers have.

I have a Mac mini myself, along with a Magic Mouse but that was as far as I was willing to go. Beer money, y'know?

Of course it does, they make sacrifices so they can make it ".....ohhhhhhhh LOOK AT THE SHINY SHINY". I accept that the GPU isnt a standard GPU just like notebooks but notebooks have replaceable CPUs, RAM, PCI-E slot for different types of cards, HDD, Optical Drives, etc.. Apple dont allow you to do it so they can make it thin.

Unibody MBP's RAM and HDD are user serviceable so I'm not sure what your problem is :/

Of course it does, they make sacrifices so they can make it ".....ohhhhhhhh LOOK AT THE SHINY SHINY". I accept that the GPU isnt a standard GPU just like notebooks but notebooks have replaceable CPUs, RAM, PCI-E slot for different types of cards, HDD, Optical Drives, etc.. Apple dont allow you to do it so they can make it thin.

The only difference with a unibody enclosure on the iMac is that you have to take off the LCD panel to get to the components (and you actually had to do the same thing for the last-generation iMacs that weren't unibody). I doubt it had very little bearing on making the temperature sensor connector non-standard considering that my Late 2009 unibody iMac has a standard temperature sensor connector.

I know the CPU is socketed in the iMac, but I've never seen anybody replace it and I doubt you can. As for RAM, easily replaceable. There are no extra slots for extra PCI-E cards. Optical drive is replaceable. Hell, the HDD is replaceable. You'll just either have to live with a jet engine in your room or control the fan speed yourself. Honestly, if you managed to open the iMac yourself, installing a little software hack should be the least of your worries.

Poor Apple users. Buy the extended warranty...Apple Care...and waste even more of your money. I NEVER EVER buy extended warrantys for personal. Why? Because of the HD, video, nic...in a PC goes bad, I can fix it myself for cheaper than a warranty. Sad part is, this wont steer people away from buying Apple/Macs. They see shiny and like a deer in the headlights...

Just another way for the greedy Apple to get more money. Now people are going to get worried and spend more money buying Apple care. Apple is laughing their asses off on the way to the bank and people are just taking it.

I love that everybody's comparing an all-in-one to a standard PC tower. Definitely the same thing. Nothing different between the two. Nope. /s

Honestly, if you're going to compare the iMac to something, compare it to a notebook. It's much more akin to one.

Pretty much. iMacs aren't cheap!

Fair enough, I generalised in that comment, but I know quite a lot of Mac owners and when asked if they mind the extra cost of Apple hardware products, they don't seem to care. Either it's because they like the brand so much they're willing to fork out that little bit extra, or some other reason. One example is a friend of mine who isn't loaded, yet has a 27" iMac with bluetooth keyboard, Magic Trackpad, Time Capsule and a Magic Mouse. I honestly don't know where this money is coming from but it does go to show the kind of dedication Apple consumers have.

I have a Mac mini myself, along with a Magic Mouse but that was as far as I was willing to go. Beer money, y'know?

Well from my own personal experience working at one of the biggest apple shops in the world, many people see the iMac as a long term (5+ years) investment. Many people have had a very poor experience with brands such as dell, hp, sony etc and feel that the extra ? is worth it. Pretty much every time i sell an iMac, i hear stories about how long they've been saving up, but i do get customers that don't get phased by the price tag, not even slightly.

By calling everyone that owns an iMac rich, is a silly comment.

My stand point on the situation:

Sucks for geeks

Most people won't care

Hey, cut me some slack here, I did say "most people". My views are a tiny bit hampered by the people that I know. Kinda shot myself in the foot there seeing as we're all filthy poor students (most of whom have indeed been saving up - even I did).

Comment retracted.

Honestly, if you managed to open the iMac yourself, installing a little software hack should be the least of your worries.

Can't say I agree with that. Like you said, the 2009 and 2010 iMac models with the exact same Unibody design don't require a non-standard temperature sensor, so why the 2011 model suddenly does is completely beyond me. Having to regulate the fans yourself is a pain, not to mention risky.

I love that everybody's comparing an all-in-one to a standard PC tower. Definitely the same thing. Nothing different between the two. Nope. /s

Honestly, if you're going to compare the iMac to something, compare it to a notebook. It's much more akin to one.

Ok, fine. My notebook and Netbook I can replace the hard drive, memory, display...and pretty much everything except the mobo. (I can replace the mobo...just normally more expensive and not worth it after a year or two)

There...better? Same thing as I said before....Apple is screwing the customers and the customers lube up and take it. Its stupid really. Like Apple doesnt have enough money already and now they are bleeding more.

If people want to live in ignorance and denial...thats fine. I will stay on this side where the sun is still shining.

Hell, the HDD is replaceable. You'll just either have to live with a jet engine in your room or control the fan speed yourself. Honestly, if you managed to open the iMac yourself, installing a little software hack should be the least of your worries.

The point is, the extra temperature sensor isn't needed, on my pc i can read the temperature from my hdd without needing two more pins. They did this only to lock down the hardware, so they can rip monies from you also after you purchased the mac.

Ok, fine. My notebook and Netbook I can replace the hard drive, memory, display...and pretty much everything except the mobo. (I can replace the mobo...just normally more expensive and not worth it after a year or two)

There...better? Same thing as I said before....Apple is screwing the customers and the customers lube up and take it. Its stupid really. Like Apple doesnt have enough money already and now they are bleeding more.

If people want to live in ignorance and denial...thats fine. I will stay on this side where the sun is still shining.

You can do the same thing with a Mac :/ Just like your PC don't expect the company to honor the warranty after you replace something major like the display ;)

Can't say I agree with that. Like you said, the 2009 and 2010 iMac models with the exact same Unibody design don't require a non-standard temperature sensor, so why the 2011 model suddenly does is completely beyond me. Having to regulate the fans yourself is a pain, not to mention risky.

The point is, the extra temperature sensor isn't needed, on my pc i can read the temperature from my hdd without needing two more pins. They did this only to lock down the hardware, so they can rip monies from you also after you purchased the mac.

I don't disagree, but we honestly have no idea why Apple chose a 7-pin connector. It's a little ridiculous to just jump to conclusions that Apple is just trying to screw customers. Honestly, the average customer can't even replace the hard drive themselves anyway, so I don't see why they would do that just to screw customers. The profit they'd gain from replacing customer hard drives out of warranty would probably be completely negated by the R&D and supply chain changes it took to get a hard drive manufacturer that used these 7-pin connectors anyway.

A much more likely scenario is that they're using those extra 3 pins for something.

Ok, fine. My notebook and Netbook I can replace the hard drive, memory, display...and pretty much everything except the mobo. (I can replace the mobo...just normally more expensive and not worth it after a year or two)

There...better? Same thing as I said before....Apple is screwing the customers and the customers lube up and take it. Its stupid really. Like Apple doesnt have enough money already and now they are bleeding more.

If people want to live in ignorance and denial...thats fine. I will stay on this side where the sun is still shining.

If you're going to stretch it that far, then technically you can replace all those things in an iMac if you know where to order the parts.

  • Like 2
There...better? Same thing as I said before....Apple is screwing the customers and the customers lube up and take it. Its stupid really. Like Apple doesnt have enough money already and now they are bleeding more.

Funny thing though is that Apple can't and doesn't get away with anything. If my iMac breaks down in its second year without owning AppleCare Apple can't just hide behind their one-year warrantee policy. There are laws in place in the European Union and thus the Netherlands which state that it's reasonable to expect that an iMac (or any piece of hardware) should last longer than one year. I know quite a few cases where people got free replacements or repairs in their second year of owning an Apple product without purchasing AppleCare.

I don't disagree, but we honestly have no idea why Apple chose a 7-pin connector. It's a little ridiculous to just jump to conclusions that Apple is just trying to screw customers.

I'm not putting it beyond Apple either... Up until now there has been zero need for this, so why there suddenly is now remains the big question. If the company really doesn't do this to screw the customer over they wouldn't ask obscene amounts of money to replace faulty HDDs. Now they're pretty much forcing you to do so.

Funny thing though is that Apple can't and doesn't get away with anything. If my iMac breaks down in its second year without owning AppleCare Apple can't just hide behind their one-year warrantee policy. There are laws in place in the European Union and thus the Netherlands which state that it's reasonable to expect that an iMac (or any piece of hardware) should last longer than one year. I know quite a few cases where people got free replacements or repairs in their second year of owning an Apple product without purchasing AppleCare.

Exactly.

Two year warranty is mandatory by EU laws for most electronics.

The shop where I bought my laptop and parts for desktop, gives even three year warranty without any additional cost for most parts (including hard drive). Further than that I got even longer manufacturer warranties for RAM and PSU. Without overpaying a cent.

Apple got this laughable 1 year. With their careful engineering and quality expectancies.

Exactly. Two year warranty is mandatory by EU laws for most electronics.

I believe that .Neo wasn't actually referring to manufacturers' warranties, but to customer protection act and manufacturing defects. Within at least some countries in EU, manufacturers can not hide behind a specific manufacturer's warranty, for example Apple Care, nor you need a one to get a replacement. Every product has to meet a reasonable life expectancy and lasting performance.

If you're going to stretch it that far, then technically you can replace all those things in an iMac if you know where to order the parts.

They arent easy to get to though, I cant say all, but most modern notebooks have one or more flaps that allow you access to all the parts you would want to replace yourself like memory, hard drive, etc.. the last notebook i owned had 1 big removable flap at the bottom giving me access to GPU and CPU as well as everything else. There is no reason not to have user accessible ports like that other than they dont want to ruin their crappy unibody marketing ploy.

more like this is why we have pc's so we can service our parts as we see fit when and how we see fit.

The Mac is a PC though, its not some special device no matter what Apple would have you think. While they dont use off the shelf components they are your standard PC fare.

I believe that .Neo wasn't actually referring to manufacturers' warranties, but to customer protection act and manufacturing defects. Within at least some countries in EU, manufacturers can not hide behind a specific manufacturer's warranty, for example Apple Care, nor you need a one to get a replacement. Every product has to meet a reasonable life expectancy and lasting performance.

Precisely. Apple's one-year warrantee means absolutely jack here in the Netherlands.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!