The Official NDS Homebrew Thread


Recommended Posts

Well.. .seems the time has come. I'm going over to the US next month and i'll be buying a DS Lite there.

i was thinking of ordering these to go with it:

- SuperCard miniSD

- Max Media Launcher (doens't require an extra cartridge and it's pretty small too)

- 512MB Kingston miniSD card

i guess that's good enough huh? it better be :p

Sounds good to me. You may want to up the SD card to 1 gig though. Trust me, you will really appreciate that extra space. The Max Media Launcher is perfect for the Lite, probably what I will get too "if" I decide to get a Lite as a lot of people have bricked thiers trying to flash it and I don't want to take the risk.

On a side note, I've updated the LE5 skins and made a few other Moonshell skins. If there is any interest, I will post them (doesn't seem to be much interst in this thread though... :wacko: )

I'm kinda interested in DS homebrew, but all the solutions I've seen so far (SuperCard, NeoFlash, etc) take away from the portability of the DS, and will stick even further out in the Lite. If someone comes out with something that is confined to within the Lite's GBA bay, then I'd make a purchase.

As of now that's as small as it gets. Those just came out too, so I doubt there will be anything smaller anytime soon, if at all. It's really not that big a deal. If you want to play any GBA games they will stick out like that as well anyway. It doesn't detract from the portability of the system at all.

  • 2 weeks later...

I've just ordered the Supercard SD, will I be okay using a standard SD card with it, or should I get a high speed one?

www.play.com currently have both 1 gig cards for ?17.99 but the high speed are out of stock at the moment:((

Just wondering if i can get away with standard speed?

The thing with them though is that they are not nearly as compatible with homebrew and the "forbidden" r word. Of the two, defintely go for the G6. The EZ4 is junk from what I've heard. The M3 and Supercard MiniSD versions don't stick out that much. Here's a pic of the M3 in a Lite. Good news is that there is an M3 MicroSD in development so it will be even smaller. No word on when it will be ready though.

Yep, they are made by the same company. You should also note about the G6 though is that it's capacity is in gigabits, not gigabytes. So the one with the biggest capcity, the 4G, is actually only 512 megabytes. Not very much if you plan on having any movies, mp3's, ect.. on it.

so how does this get around flashing the Lite?...

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

Oh, and support of sleep mode matters to me as well.

Edited by tlogank

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

Edited by tlogank

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

Alright, I know the G6 Lite will have a fixed 512MB. But what about the EZ Lite adapter that has the MicroSD cards? Here is the screenshot...it looks pretty nice:

ez4l-2.jpg

Edited by tlogank
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How can it beat a Steam machine without a serious GPU? The two CU iGPU only provides about 5fps in gaming. That's not going to make any gamer happy.
    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!