UK ISP BT Offers up to 76Mbps Superfast Broadband Boost for Free


Recommended Posts

I'm on BT Infinity and whilst my problems aren't as bad as yours, I agree that their router is a joke. The WiFi just randomly decides to stop working about 3 times a day, and the whole connection (wired too) drops daily requiring a reboot. >_<

Yea I got rid of the Home Hub 3.0 after about a week of getting weird router crashes everynight around the same time, replaced it with my own and rarely goes down now

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem).

They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing).

They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked mine, its the 2B and doesn't seem to have any problems

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

I tried it quickly once and couldn't connect but I might have had a static Internal IP set on the PC so it would have been on the wrong range, I guess your PC would be given an external IP if it worked

Doesnt sound like a very safe thing to do though

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

As Paul says, he went off to restart the router. When he did another speed test, the results were still poor. To me, it's looking like its not more the router at fault but his actual internet connection.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

What acts as a DHCP server though? Your ISP ?

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem). They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing). They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked now - it's the HG612 here as well. Best bet is to replace it then, right?

shame there is no date for my exchange. My county will be getting 90% FTTC/FTTP by the end of 2014 but my 20mb virgin cable will do me until then, getting free upgrade to 60mb hopefully in july. I hope BT reduces the cost of FTTC in the near future as it is around ?30 inc phone line for the cheapest FTTC from any ISP as a result of BT charging ISP loads. Yet i can get 30mb virgin cable for ?22.50 ish, fttp is too pricey at the moment.

One restart later, and here are my results from both:

Date of Speed Test: 2012-04-11 16:45:54 Download Speed: 680 kbps (85 KB/sec transfer rate) Upload Speed: 6828 kbps (853.5 KB/sec transfer rate)

1888354051.png

Ridiculous, to be honest. I've had nights where it's absolutely silky smooth as well, which makes it even more frustrating to me.

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router.

Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router. Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

I got 3.67MB. Still not good, but it's an improvement. I checked with my mum and we'll see about getting a replacement for the current HG621 we have in the house as well. If there's a new router too, that'd be great.

I've just placed an order for this BT product. The house I'm in is a new build and not to mention the cab is less than 100metres, so I'm hoping to get nearly the full speed. I'll find out next Thursday (the 19th) any ways. :)

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...) Infinity package for months now with no problems - had full speed since the day it was installed and no downtime. Was on Virgin 50 meg at the time but it was diabolical in this area so I moved to VDSL. I'll certainly be renewing my contract for the extra speed tomorrow. Should see at least 70Mbit out of it given how far I am from the FTTC cab.

Yea that's what I thought, not going to help if the openreach modem is the problem though

It narrows it down to it being the modem rather than the router though. Its only a method of fault finding - its not any form of fix if that's what you thought I meant!

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...)

I wondered why they'd stopped using 40!

Aww. Still stuck on 6mbps/448kbps :(. Guess that's what you get for living with a tiny amount of exchange subscribers.

My whole internet life I was always on a crappy slower than 90% of anyone connection no matter where I lived, it has only been a few months since I finally got FTTC

Kinda makes up for all those years of hair pulling to get a huge upgrade twice in 12 months

Why not, I'm not going with any other ISP while BT are providing these sorts of speeds, quite happy to renew

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yes, I presume BT argue that the contract covers the cost of the modem/router. Of course, nobody actually wants these and I can't think of the last time I ever used an ISPs hardware. Be* expect you to give them the router back when you leave them (or charge you for it if you don't return it) which I think is fair and much better than being stuck on a contract.

BT also make you sign contracts for landlines despite the fact that they're not supplying any hardware and they force you to renew the contract if you ever try to switch packages. I think they're just taking the p*ss to be honest and I know they use it as an excuse to lock you in and charge you extra if you ever want to change anything.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

That's good to know. My ADSL connection gets really unstable in Autumn and Spring as the temperature shifts (weird, I know :)) and it would be nice to have a stable connection. I just wish BT offered static IP addresses on their consumer packages because I could accept the customer service problems if I didn't have to find workarounds and alternatives to the things I do now. BT Business plan prices are steep when all you want is a static IP address.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!