UK ISP BT Offers up to 76Mbps Superfast Broadband Boost for Free


Recommended Posts

I'm on BT Infinity and whilst my problems aren't as bad as yours, I agree that their router is a joke. The WiFi just randomly decides to stop working about 3 times a day, and the whole connection (wired too) drops daily requiring a reboot. >_<

Yea I got rid of the Home Hub 3.0 after about a week of getting weird router crashes everynight around the same time, replaced it with my own and rarely goes down now

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem).

They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing).

They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked mine, its the 2B and doesn't seem to have any problems

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

What happens to the speeds when you plug directly into the modem, bypassing the router? I think you need to set it up as a PPPoE connection, although as you've changed the router you'll know the settings yourself.

If you get the same poor speeds I'd bet your modem has started to fail.

I tried it quickly once and couldn't connect but I might have had a static Internal IP set on the PC so it would have been on the wrong range, I guess your PC would be given an external IP if it worked

Doesnt sound like a very safe thing to do though

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

As Paul says, he went off to restart the router. When he did another speed test, the results were still poor. To me, it's looking like its not more the router at fault but his actual internet connection.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

All you're doing is removing the router. As long as your firewall is up and running then it's just removing a potential piece of faulty equipment. If his speeds are still low then its either a fault with the 612 (Google HG612 overheating) or a problem on the line - both of which Openreach have to sort out.

It's like back when ADSL first came out, you pretty much needed an ADSL modem and a separate router as combo devices were rare and expensive. If there was only one computer in the house, you could plug the modem directly into it. No need for an internal network etc.

What acts as a DHCP server though? Your ISP ?

Do you have that Huawei HG612 Openreach modem (not the router, the VDSL modem). They're known to fail in this way and as such have been replaced by newer 2B and 2V revisions (Should be sticker on the back which says if you have a 2x revision) and also Openreach are now providing modems manufactured by ECI (Although I think this depends on whats in the cabs rather than because of the Huawei's failing). They get notoriously hot. Even the two newer versions aren't exactly reliable unfortunately.

Just checked now - it's the HG612 here as well. Best bet is to replace it then, right?

shame there is no date for my exchange. My county will be getting 90% FTTC/FTTP by the end of 2014 but my 20mb virgin cable will do me until then, getting free upgrade to 60mb hopefully in july. I hope BT reduces the cost of FTTC in the near future as it is around ?30 inc phone line for the cheapest FTTC from any ISP as a result of BT charging ISP loads. Yet i can get 30mb virgin cable for ?22.50 ish, fttp is too pricey at the moment.

One restart later, and here are my results from both:

Date of Speed Test: 2012-04-11 16:45:54 Download Speed: 680 kbps (85 KB/sec transfer rate) Upload Speed: 6828 kbps (853.5 KB/sec transfer rate)

1888354051.png

Ridiculous, to be honest. I've had nights where it's absolutely silky smooth as well, which makes it even more frustrating to me.

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router.

Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

Check the IP Profile for your line and post back with details - http://www.speedtester.bt.com/ (click the "Fibre to the Premises Diagnostics" under Note 2).

A stuck IP Profile with low download speeds usually indicates a fault due to line noise or restarting the modem/router quite frequently on your end (which also shows your local exchange there is instability), contact BT to reset it and/or get them to sort you out a new router. Once they do, it can take up to 3 weeks to get the maximum speed for your line (providing there are no other issues).

I got 3.67MB. Still not good, but it's an improvement. I checked with my mum and we'll see about getting a replacement for the current HG621 we have in the house as well. If there's a new router too, that'd be great.

I've just placed an order for this BT product. The house I'm in is a new build and not to mention the cab is less than 100metres, so I'm hoping to get nearly the full speed. I'll find out next Thursday (the 19th) any ways. :)

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...) Infinity package for months now with no problems - had full speed since the day it was installed and no downtime. Was on Virgin 50 meg at the time but it was diabolical in this area so I moved to VDSL. I'll certainly be renewing my contract for the extra speed tomorrow. Should see at least 70Mbit out of it given how far I am from the FTTC cab.

Yea that's what I thought, not going to help if the openreach modem is the problem though

It narrows it down to it being the modem rather than the router though. Its only a method of fault finding - its not any form of fix if that's what you thought I meant!

Been on the 40/10 (sorry, 38/9 as BT are now forced to advertise it as...)

I wondered why they'd stopped using 40!

Aww. Still stuck on 6mbps/448kbps :(. Guess that's what you get for living with a tiny amount of exchange subscribers.

My whole internet life I was always on a crappy slower than 90% of anyone connection no matter where I lived, it has only been a few months since I finally got FTTC

Kinda makes up for all those years of hair pulling to get a huge upgrade twice in 12 months

Why not, I'm not going with any other ISP while BT are providing these sorts of speeds, quite happy to renew

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

That's fine if you're happy with BT but not everyone wants to be stuck on a contract for internet. To be honest, I don't even know why there is such a thing as a contract for internet access - what exactly are you paying off?

I was a BT Broadband customer years ago when they offered unlimited ADSL. I wasn't effected but I saw a lot of people stuck when BT changed their terms of service and introduced download limits - all the people on contracts were stuck with nowhere to go. I've been considering BT Infinity because the speeds look so good but I really don't want to end up stuck with BT because they're dodgy, unreliable, overpriced and their customer service is the worst I've ever had to deal with. Seeing them force users to extend their contracts just to take advantage of network improvements is not the sort of thing that makes me want to switch.

I've been with Be* for the last few years. They don't have contracts (you just have to give them a month's notice I think), they offer things like static IP addresses as standard and their customer service is top notch. The only problem is, they don't have any clear plan to migrate to fibre-optic any time soon :angry:

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yea contracts suck in general, but I'm not planning on moving house any time soon and not planning on leaving BT so it really doesn't make much difference to me atm

But I get where you are coming from, the only reason I can think of contracts is for when they actually have to install equipment your end or they could spend millions doing that every day only for the customer to leave them 1 month later and keep all the gear

Yes, I presume BT argue that the contract covers the cost of the modem/router. Of course, nobody actually wants these and I can't think of the last time I ever used an ISPs hardware. Be* expect you to give them the router back when you leave them (or charge you for it if you don't return it) which I think is fair and much better than being stuck on a contract.

BT also make you sign contracts for landlines despite the fact that they're not supplying any hardware and they force you to renew the contract if you ever try to switch packages. I think they're just taking the p*ss to be honest and I know they use it as an excuse to lock you in and charge you extra if you ever want to change anything.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Anyway, hopefully everything will work out for you with BT :) In the meantime, I need to make a list of pros and cons to see whether I can stomach returning to BT.

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

Thanks, well I have to say since getting FTTC I haven't had an ounce of bother with them, their ADSL package is a joke though, constantly resetting routers and emailing and calling them to try get something working, but the lines are old, so no wonder FTTC is more or less problem free, it has removed 95% of the copper line from the equation

That's good to know. My ADSL connection gets really unstable in Autumn and Spring as the temperature shifts (weird, I know :)) and it would be nice to have a stable connection. I just wish BT offered static IP addresses on their consumer packages because I could accept the customer service problems if I didn't have to find workarounds and alternatives to the things I do now. BT Business plan prices are steep when all you want is a static IP address.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!