Recommended Posts

I wont lose any sleep over it, Ill just install my PowerDVD deluxe for DVD/blu-ray playback like Ive always done in the past........sorted!

Which has been the case since Windows XP. Software like PowerDVD has been part of the bundleware with new PCs (desktops and portables alike) and motherboards (for the DIY crowd) for at least that long. That is NOT going away. (Cyberlink has bundling deals with *all* the major North American PC and motherboard OEMs, and quite a few of the minor ones; impact of this on North America - none. The same also applies to the EMEA (thus impact there is also nil). Why should Microsoft duplicate what is already included with the hardware?)

  • 1 month later...

hi giantpotato i would like to know how microsoft arrived at the 6% figure, its also nice to see that you dont care about spending money on something that used to be bundled with the system, it must be nice to have lots of money to throw around, unfortunatly not all of us are affluent like you and perhaps that is probably why we are quick to complain, so spare a thought for those of us who dont have money to throw around, and yes linux is looming as a genuine contender for microsoft.

hi remixedcat, i would like to know how microsoft arrived at the 6% figure, its also nice to see that you dont care about spending money on something that used to be bundled with the system, it must be nice to have lots of money to throw around, unfortunatly not all of us are affluent like you and perhaps that is probably why we are quick to complain, so spare a thought for those of us who dont have money to throw around, and yes linux is looming as a genuine contender for microsoft.

No it isn't.. Linux as a Desktop OS is still less market share than the OS on my Phone.. And that won't change.. Plus the same fees that MS needs to pay for MPEG-2 playback in windows, you'd be legally required to in Linux too.. it's all patent law..

MS gets the figures from the statistics sent back to MS.. and I'd still see 6% as high.. I can only think of a handful of people that use it that I know of, most use other programs like XBMC and the like.. and even if you add all the people that use all those together, I'd still be under the 6% mark of people I know with windows that would just look at me funny if I mentioned it..

Don't get me wrong, I'd like them to keep it, I HAVE used it.. but it's a very niche market, and there are better things their programmers can be doing for More of the market.. And if it's a viable market, then someone else will pickup where MS left off and make a product to do it..

Oh and I saw lots of people posting about codec packs and crap.

VLC is crap, I mean it'll play anything, but is very meh on the quality.

MPC is old.

k-lite codec pack might as well be a virus.

If you want a solution, look at MPC-HC [ Media Player Classic - Home Cinema -- http://xvidvideo.ru/ ] .. You don't NEED any codecs for it to work with 99.9% of stuff [ but if you want, you can install a codec and make sure it's preferred/used instead of the internal one.. ].. It's wonderful. It's got all the install and go of VLC, but with the ability to customize what codes are used, what splitters are used, renderers, etc.

xmbc, media portal for substitutes of media center, they both do the same thing, serve the same purpose.

media player classic or vlc also. for me it's a thing that should have been done for quite some time. wmc and media center are bloatware.

None of those media programs even come close to Windows Media Center for DVR and TV capabilities.

However, hardly anyone uses a PC as a HTPC. Cable networks in the US have made this near impossible anyways.

People do use their laptops for streaming Netflix and sometimes connecting it to their TV, which of course doesn't require a DVD.

I'd say cue the trolls, but what exactly is the past tense version of the word cue?

Let's just look at this though shall we.... your beloved XP didn't include DVD playback either. It was introduced in Windows Vista, an OS which you no doubt hated. It wasn't free, you paid for it in the cost of the OS as there was a license fee Microsoft had to pay.

Giving people back the choice of which DVD playback app they want to use, and lowering the cost of the OS as a byproduct is a good thing. (assuming of course it does result in a price reduction for the OS. If it doesn't, then BOOO to Microsoft :) )

First post nails it. I don't want to have to pay for the cost of DVD codecs when I have no intention of playing DVDs in my computer. Thats what I got a TV for. People who want it can go find the DVD player they love and buy it!

First post nails it. I don't want to have to pay for the cost of DVD codecs when I have no intention of playing DVDs in my computer. Thats what I got a TV for. People who want it can go find the DVD player they love and buy it!

You realize the cost for the DVD Codec on your purchase price is probably 5cents.. Just saying, it's not cutting your purchase price by $20 or anything lol

actually the license is 2 or 2.5 dollars.

Still, hardly enough to get worked up about.. They will remove the codec, but are still gonna charge the same amount, and everyone knows it. MS is not gonna lower the price by $2 because it's gone..

hi ryoken, it amazes me how you or anyone can say only 6% use a product i mean have you asked all computer users in the world what they use how on earth can you say that?, did you ASK EVERYONE?. your next statement regarding linux and i quote "and that wont change" unquote,it amazes me that you can say that, how do you know that it will never happen, perhaps you are a prophet.lol.

hi ryoken, it amazes me how you or anyone can say only 6% use a product i mean have you asked all computer users in the world what they use how on earth can you say that?, did you ASK EVERYONE?. your next statement regarding linux and i quote "and that wont change" unquote,it amazes me that you can say that, how do you know that it will never happen, perhaps you are a prophet.lol.

I think you need to look closer at the general population..

If you had a Browser, and a Word Program, and Solitaire, you have an OS that probably 70% of the population would never outgrow.

I mean I'm in IT, I know a LOT of techsavy people.. But I also know they are NOT the norm.. I would be SHOCKED if even 10% of Windows Users would know how to even launch MCE, much less use it. It is a Niche market. Accept it.

Hell I know what MCE is, I'm techy, and I have ~14TB of content on hand.. And I don't even use it.. it's more trouble than it's worth.. it looks nice and all, but I can do most things it does faster and easier with a wireless mouse and keyboard from my couch.. Only thing it's really any good for is as a DVR.. And I have no need for that..

Most people I know either don't keep their movies downloaded [ watch and delete ]. or stream it.. They have no interest in watching TV through a computer, and they are quite happy with the DVR's that their cable/dish co provide..

I can honestly say I know more people that have purchased a setup box for playback than use MCE or one of it's alternatives..

As for How MS gathers it's information.. Well my bet would be through Windows Update and other systems that provide anonymous [ but accurate ] information on your system.. Add to that only Home Premium+ even includes it, and a lot of comps are sold with Home Basic.

And as for Linux.. It's been around since the early 90's and what's it marketshare again ?

Despite it growing, Slowly, it's got no chance of a sudden growth.. Business wouldn't adopt it cause the masses know windows, and they don't want to retrain to use new OS's, and new Programs.

Home users aren't gonna change because their computer comes with Windows and they don't know any better..

And the PC Makers aren't gonna change cause people don't know what it is, how to use it, and as such, will go for a Windows box even if given a choice between the two..

You don't need to be a prophet to understand human nature.

And this is all above and beyond the fact that Linux, you get what you pay for.. it's free, and as such has **** support.. Even if you do install it, there's no real support for most distros, and asking for help leads to you being attacked for being too stupid to know how to use it, and go back to Windows/Mac.. Not to mention there's buggy hardware support, and software it hit and miss.. Some is as good as it's Windows/Mac Counterparts, and a lot of it is crap..

Linux is the Android Marketplace.. no standards, means a few gems, and a LOT of crap.. It's only chance is for a big company to come in and invest a LOT into a single distro, and build it up, with software, keeping a consistent UI, etc.

And I say all of this as someone who has used various Linux distros since late 90's till now.. Different is I'm not an idiolog.. I see all the falts that exist in it, which so many Open Source peeps tend to forget about because they simply hate Windows/Mac/whatever..

hi ryoken, it amazes me how you or anyone can say only 6% use a product i mean have you asked all computer users in the world what they use how on earth can you say that?, did you ASK EVERYONE?. your next statement regarding linux and i quote "and that wont change" unquote,it amazes me that you can say that, how do you know that it will never happen, perhaps you are a prophet.lol.

Actually the 6% is microsofts own numbers, from their own analytics received from millions upon millions of computers around the world. (remember that question when you fist start your computer? yeah that one). Also the actual number was far lower, 6% was the amount of people who actually started MC and used it for a few minutes only, people who used it actively was a fraction of that again.

Actually the 6% is microsofts own numbers, from their own analytics received from millions upon millions of computers around the world. (remember that question when you fist start your computer? yeah that one). Also the actual number was far lower, 6% was the amount of people who actually started MC and used it for a few minutes only, people who used it actively was a fraction of that again.

6% of 500 million is still 30 million, (or over 60 million of the current 1.25 Billion Windows users) and that's still quite a few boat loads of people using it whatever way you cut it. Even a fraction of that is still millions of people. I'd wager only 5% of Windows users use the command line or the run box, but they're not going to cut those. :p Still a daft idea to cut it - I can understand removing it from Enterprise versions of Windows and Windows On ARM, but what they've done is just lousy. If you wanted people to use it they could easily advertise it / more prominently place it.

The goal they had with Media Center is done, it's been replaced by the Xbox. Honestly guys, it's not that complicated, they're not going to update MC after this probably so it's dead end. MS's "media center" idea was a HTPC, but now it's the Xbox. And the Xbox is the way more successful product for them at this point. Just add DVR to the next Xbox and you've got a solid media center/HTPC replacement unless you have issues with some formats, mostly MKV. But there are ways around those as well.

  • Like 1

6% of 500 million is still 30 million, (or over 60 million of the current 1.25 Billion Windows users) and that's still quite a few boat loads of people using it whatever way you cut it. Even a fraction of that is still millions of people. I'd wager only 5% of Windows users use the command line or the run box, but they're not going to cut those. :p Still a daft idea to cut it - I can understand removing it from Enterprise versions of Windows and Windows On ARM, but what they've done is just lousy. If you wanted people to use it they could easily advertise it / more prominently place it.

I think you missed the fact about only a fraction of those 6% actually using MC and not just starting it for a few seconds/minutes.

6% of 500 million is still 30 million, (or over 60 million of the current 1.25 Billion Windows users) and that's still quite a few boat loads of people using it whatever way you cut it. Even a fraction of that is still millions of people. I'd wager only 5% of Windows users use the command line or the run box, but they're not going to cut those. :p Still a daft idea to cut it - I can understand removing it from Enterprise versions of Windows and Windows On ARM, but what they've done is just lousy. If you wanted people to use it they could easily advertise it / more prominently place it.

Also to cut it the other way, that is 1.2 billion MPEG2 licenses MS doesn't need to pay for, 1.2Billion x $2.5, seems like a lot :)

Yes there's a few million peopel actually using MC. But they're still a severely minor fraction, and the command line have to be there anyway, and resource wise isn't even close to MC.

I use media centre all the time, but with the xbox as an extender, never on the actual PC. That is because my TV ariel comes into the room where the PC is, the ariel next to the TV is about 30 years old and is terrible.

hi ryoken, i am a retired IT developer just to get that out of the way, microsoft can only get figures if people are on the internet, what about the countless people who never use the net, my point is that nobody can put precise figures on what the population is doing on their computers and as for business not wanting to adopt LINUX, you obviously have not heard that the american DEPARTMENT OF DEFENSE ( BIG BUSINESS ) has awarded 28 million dollars to the LINUX comunity for a program to run their unmanned drones because the program they were using ( WINDOWS ) was unacceptable, i digress, the point of this forum is that microsoft has removed a feature from windows and in some cases forcing users to pay for third party applications depending whers they live and as johnny pointed out microsoft will make huge savings without passing them on to us.

Given that Microsoft haven't announced pricing, your assertion is baseless and inflammatory.

Feel free to think before posting.

I use media centre all the time, but with the xbox as an extender, never on the actual PC. That is because my TV ariel comes into the room where the PC is, the ariel next to the TV is about 30 years old and is terrible.

You are, fairly unfortunately, a fringe case.

XBMC would be your best bet (and far better bet tbh).

Well, go from Windows 95 (the first on the NT based consumer OS's) cost point and account for inflation alone.

Microsoft's operating system is MILES below inflationary costs.

Even ignoring that, there was a price drop from the release price of Vista to the release price of 7. It's one of the sales points we pushed it out with.

hi +articuno1au,ask somebody in india if windows is MILES below inflationary costs, your telling me that windows 7 is cheaper than vista, not where i live lets face it microsoft is a business and its out to make money and i think that another poster here ( JOHHNY )has hit the nail on the head, i will end my post and thank you for your points of view.

This topic is now closed to further replies.
  • Posts

    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!