Recommended Posts

Ahh you mean you poke your nose into other people's business and take the law into your own hands? That explains a lot.

Sighhhh... it's not in my nature not to intercede when something's going on in front of my damned face.

Try this:

I had been asked by my neighbors to keep an eye out for their 16 y/o daughter. She had come home from her summer job and was sleeping in, but her parents had to work. At about 9 AM I look out my back door to see three males breaking in their kitchen doorwall, wearing ski masks - in August. Not good, and she could be hurt or worse before the the cops arrive.

I pull out my firearm, pocket the cordless phone, exit and get the drop on them. One has a Ka-Bar combat knife, which he very wisely drops, and all three end up face down on the ground while I call the cops. It takes them 15 minutes to arrive - time enough for the perps to have done serious damage to the neighbors daughter.

By your standards I should have called the cops and let the chips fall as regards what they could have done to her until they arrived, but that isn't in most American's DNA - and certainly not mine.

  • Like 2

No, you don't know Jack. That much is obvious.

I have only interceded when felonies were being committed in my presence and when the opening to properly intercede presented itself. That is what you learn in the carry classes, both Basic and Advanced Level. What we learn isn't that different than what a police cadet does, often from the same instructors. but on average civilians get more range time and are better shots than street cops.

You also seem to be forgetting that in 49 of 50 states citizens have the right to perform citizens arrests - a limited police power.

  • Like 1

I'm actually wishing I had a decent handgun right about now. I'm pretty sure someone followed me home and watched me go inside, and then left. No idea if something is going to happen later O_O

DocM, come protect me :laugh:

  • Like 1

So gun classes actually train people to act like vigilantes? that also explains a lot.

No, they do not. Please stop baiting him and making assumptions like that. Gun safety classes teach you how to use them SAFELY and not be as likely to freak out and cause an accident or use it unnecessarily. I do know a thing or two about this topic; my ex-husband was a cop, and while he was not a shining example of one, I did meet some who were. Modern-day heroes, some of them. Situations like the one before--if I were that 16-year-old girl, if this had happened to me when I was that age, I'd be thankful every day for a "vigilante" like him who stepped up and (peacefully, I may add) neutralised the situation. Often just having the gun and letting them see that you do is enough to stop them, as well as knowing how to handle yourself.

  • Like 1

He lies about my position to deliberately misrepresent it and I get accused of baiting him? lol. There may be the odd occasion where vigilantism may help, but conversely it can also be dangerous when you have people thinking they have the right to take the law into their own hands. It's the kind of power not everybody uses honestly, which is usually why we pay people money and train them to be cops. I'm not saying people should always be left to die, there will always be exceptional circumstances in which an intervention may be necessary, but those circumstances should be the exception not the rule.

Chjarisma;

Thank you, and you state how it really works on the ground precisely. Vigilantes go out hoping for trouble, but those who carry simply prepare for if trouble looks for and finds them. Different things entirely.

Suggestion for a ladies 'little friend': Ruger LC9, second from left in my signature.

  • Like 1

He lies about my position to deliberately misrepresent it and I get accused of baiting him? lol. There may be the odd occasion where vigilantism may help, but conversely it can also be dangerous when you have people thinking they have the right to take the law into their own hands. It's the kind of power not everybody uses honestly, which is usually why we pay people money and train them to be cops. I'm not saying people should always be left to die, there will always be exceptional circumstances in which an intervention may be necessary, but those circumstances should be the exception not the rule.

No, I didn't say that, I just mean on this particular topic I think you are reading too much into what he is saying. Some people do abuse that power, but not everyone does. That's all I am trying to say...

(and yes, those circumstances you mentioned are, thankfully, the exception.)

  • Like 1

Chjarisma;

Thank you, and you state how it really works on the ground precisely.

Suggestion for a ladies 'little friend': Ruger LC9, second from left in my signature.

Ah Doc, the ones I liked best from before were either a S&W .38 snubnose revolver or the standard issue 9mm Glock. Or maybe the 'baby Glock'. I haven't seen or used them since we divorced back in '07, but I do remember being fairly competent with those when I would accompany him to the shooting range.

Anyway, sorry, taking this thread a wee bit off topic. :)

I never claimed that everyone abuses that power, but the problem is that for every person prepared to use that kind of power scrupulously I'd wager you'd find 2 that were not. And that is why I am opposed to it, not because I want to see innocent people being harmed, I just feel uneasy about people taking the law into their own hands. It's only a couple of steps away from anarchy.

Airsoft is fun. This is not.

Air rifles are great fun for practice shooting. I don't kill animals with them, but they're the right level for me. Fun but not too dangerous.

Anarchy is what exists on a lot of city streets, and your 1:2 proportion is way off. The crime rate for concealed or open cariers is extremely low, which would not be the case if they were running around acting out as you suggest.

  • Like 1

Except my comment was with regards to vigilante types, not all concealed weapon carriers. I'm sure there are plenty of concealed weapon carriers that don't act like vigilantes

Air rifles are great fun for practice shooting. I don't kill animals with them, but they're the right level for me. Fun but not too dangerous.

I'm in an airsoft society at university. We often go to a local place which is in a forest with significant high ground at both ends. It's freaking awesome.

I'm in an airsoft society at university. We often go to a local place which is in a forest with significant high ground at both ends. It's freaking awesome.

I presume you don't shoot air rifles with metal slugs though? Airsofting does sound like a hell of a lot of fun (as does paintballing) but I don't really know enough people to partake in my local area.

Airsoft is a spring, electric or gas cartridge powered gun that fires 6mm plastic pellets, and they can be single shot, semi-auto or full-auto. Some use 2 or all 3 power systems. Velocities run 200-700 feet/second, but the energy is very low - maybe 1-2 lbf. There are targets for indoor/outdoor use, and they can be used for training in a basement.

Many are very close replicas of real weapons. Some of the pistols are so accurate a copy even the slide moves back just like a real semi-auto pistol. I have one of these that's a dead ringer for a SIG Sauer P226, which makes it a great trainer for my real SIG P226 Mk25.

A BB gun here has 'BB' meaning ball bearing. These are .177" (actual 0.172" to 0.173') steel balls, sometimes copper coated, and can be spring, pumped air or gas powered. No red tip for these as they can do real damage. The .177's often can also fire a .177" (actual) lead pellet with even more energy, and there are pellet guns that run larger - .20 (6mm), .22 or .25, which are very powerful and excellent for dispatching varmints.

We tend to call those that fire real pellets air pistols although I understand that they can sometimes crossover. I sure as hell wouldn't want a metal BB fired at me, even with low energy they still hurt. I guess the term BB gun has became somewhat bastardised in this country, as a lot of the guns can fire both metal and plastic balls.

I've seen those in airsofting shops before, I've never been able to figure out exactly what their purpose is though? I only really have any experience in the use of air rifles.

Tranq darts are usually fired from a .50 caliber (12.95 mm) gas gun. The dart has a metal ball whose inertia drives the syringe plunger forward at impact. You might be able to make one for a single-shot .25 pellet gun, but the agents are restricted so....

This topic is now closed to further replies.
  • Posts

    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
    • I did test it a month or so back, but ... the results I expect to be on the first page are not there.
    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!