Trouble installing Windows 8 RTM

By +unabatedshagie
in Microsoft (Windows)

 Share

Recommended Posts

Grand Master

+unabatedshagie Subscriber¹

Posted
  • Subscriber¹
Posted

I'm trying to install RTM on my desktop and I'm running into graphical issues.

During the install there were graphical glitches.

post-25418-0-28568300-1347094238_thumb.j

I managed to work my way through the install however when the machine rebooted neither of my displays are switching on.

My hardware specs are:

Mobo: Asus M2N32 SLI Deluxe with 4 gig ram

Graphics Card: Nvidia 7600 GT

I'm not quite sure how to go about getting the display working.

Link to comment
https://www.neowin.net/forum/topic/1104117-trouble-installing-windows-8-rtm/
Share on other sites
Grand Master

+unabatedshagie Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

I doubt it's a hardware problem as I had Win 7 running with no problems about 30 minutes before I tried to install Win 8.

I could probably get into the advanced options but the screen corruption happens during setup making reading anything quite difficult.

Grand Master

Detection

Posted
Posted

I doubt it's a hardware problem as I had Win 7 running with no problems about 30 minutes before I tried to install Win 8.

I could probably get into the advanced options but the screen corruption happens during setup making reading anything quite difficult.

Long shot, but is your BIOS updated to the latest version ?

Is that GPU onboard or a separate card ? If separate, do you have onboard you could use until you get into windows ?

Grand Master

Detection

Posted
Posted

I'd say try to wing it through the setup by feeling your way around, hopefully once it's installed it'll decide to work right (Or you can go update the drivers)

Not easy with no displays at all unless you have another machine with a display to clone keyboard commands with.

--

Grand Master

+unabatedshagie Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

I'd say try to wing it through the setup by feeling your way around, hopefully once it's installed it'll decide to work right (Or you can go update the drivers)

I did wing it through the setup, I have it installed. Problem is when I try and start it, either normally or in safe mode the displays don't work so I can't get in to install the drivers.

Grand Master

Detection

Posted
Posted

I did wing it through the setup, I have it installed. Problem is when I try and start it, either normally or in safe mode the displays don't work so I can't get in to install the drivers.

You say 'Neither of your displays' are switching on

Have you tried unplugging all but one / trying each one in a different GPU port ?

My 8 install sent the display over to the HDMI port (TV) after a reboot, my main LCD (DVI) was set as the extended display, I had to finish install on the TV

Grand Master

Detection

Posted
Posted

Yeah, I have dual monitors. I'll try booting with only one in and see if that works.

If it doesn't, try reinstalling 8 with only 1 monitor plugged in, it could be that it has bugged out and sent the combined resolution to each display, or refresh rate is messed up etc

Rising Star

RottGutt

Posted
Posted

Like +Detection says, I believe you need to unplug your secondary monitor. A lot of folks with 2 monitors have had this problem initially. Once booted with only your primary monitor, you should be able to plug the secondary back in and not have that problem again. Looking forward to hearing if this fixes the problem.

Tim

Grand Master

+unabatedshagie Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

Tried installing with only one monitor in. Exactly the same as having two in. Graphic glitches during install and after the first reboot the screen goes blank after the windows symbol shows on the screen.

Grand Master

Nothing Here

Posted
Posted

Are you running the monitors through HDMI? If you are, try going old school instead and use VGA. Not sure what else to try. I haven't had a 7600 so I don't know the specs or even if it has a VGA slot on it.

Grand Master

Detection

Posted
Posted

Tried installing with only one monitor in. Exactly the same as having two in. Graphic glitches during install and after the first reboot the screen goes blank after the windows symbol shows on the screen.

8 must be installing a driver that your card doesn't like, can't really think of a way around it unless you can make a custom 8 install disk with the new nVidia drivers in it, or get to the desktop and install the new drivers without using the monitor

Grand Master

+unabatedshagie Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

No hdmi, my card only has two dvi ports.

I can't even use onboard graphics as my mobo doesn't have any.

Can you RDC in to the machine or try a different video card?

Are there any tools to automate the install for the video drivers?

Don't have another video card. I haven't been able to get in to set up windows so I won't be able to RDC into the machine.

8 must be installing a driver that your card doesn't like, can't really think of a way around it unless you can make a custom 8 install disk with the new nVidia drivers in it, or get to the desktop and install the new drivers without using the monitor

Is it even possible to create a custom disk?
Grand Master

Detection

Posted
Posted

No hdmi, my card only has two dvi ports.

I can't even use onboard graphics as my mobo doesn't have any.

Don't have another video card. I haven't been able to get in to set up windows so I won't be able to RDC into the machine.

Is it even possible to create a custom disk?

With 7 yes, not sure if the program will work for 8, worth a shot I suppose

http://www.rt7lite.com/

Grand Master

+unabatedshagie Subscriber¹

Posted
  • Author
  • Subscriber¹
Posted

Had a little Google, seems like Microsoft made a mistake with the RTM which affects some nVidia cards, guess I have one of those cards.

As my mobo doesn't have onboard graphics I've guess I'm out of luck for getting this installed.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Euro-Office must default to ODF to be considered "genuinely European", LibreOffice argues

      By +Eternal Tempest · Posted

      It use to be a nightmare, with LibreOffice supporting a newer draft ODF standard by default, and Microsoft Office supporting the older non-draft standard. Now that they both support the same version of ODF, they should be interoperable.
    • Brave Browser 1.91.171

      By Copernic · Posted

      Brave Browser 1.91.171 by Razvan Serea Brave Browser is a lightning-fast, secure web browser that stands out from the competition with its focus on privacy, security, and speed. With features like HTTPS Everywhere and built-in tracker blocking, Brave keeps your online activities safe from prying eyes. Brave is one of the safest browsers on the market today. It blocks third-party data storage. It protects from browser fingerprinting. And it does all this by default. Speed - Brave is built on Chromium, the same technology that powers Google Chrome, and is optimized for speed, providing a fast and responsive browsing experience. Brave Browser also features Brave Rewards, a system that rewards users with Basic Attention Tokens (BAT) for viewing opt-in ads. This innovative system provides an alternative revenue model for content creators and a way to support the Brave community. SlimBrave Neo takes all the good things about Brave and makes them even better by keeping everything clean, light, and privacy-focused. It removes the extra clutter, turns off features you might not need, and cuts down on anything that could slow you down or collect unnecessary data. Because it relies on simple settings and policies instead of modifying the browser itself, you still get full Brave compatibility—just in a smoother, lighter, and more privacy-friendly package. Brave Browser 1.91.171 changelog: General Fixed Cardano not being disabled on upgrade to Brave Origin. Upgraded Chromium to 149.0.7827.103. Origin Removed “Survey Panelist” setting from brave://settings/privacy. Fixed P3A and usage ping under brave://settings/privacy being displayed on first launch on Linux. Upgraded Chromium to 149.0.7827.103. Download: Brave Browser 64-bit | 1.2 MB (Freeware) Download: Brave Browser 32-bit View: Brave Homepage | Offline Installers | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Can't access the forum on mobile

      By RaidenX · Posted

      Hi. As the title suggests, I can't access the forum on my phone. I'm using Edge on Android and when I try to navigate to the forum I get a "we value your privacy" popup and none of the buttons are clickable. It effectively stonewalls me from reading any forum content.
    • Google Chrome is killing all uBlock Origin bypasses, Microsoft Edge, Opera to follow

      By Brandon H · Posted

      Honestly you're not wrong about AdGuard. Neowin frequently has lifetime license discounts for them and that's how I got my cheap family license a few years ago to run it on all my devices.
    • Windows 11's big performance boost is finally available for all

      By nekrosoft13 · Posted

      yap yap, drink more coolaid.

  • Recent Achievements

    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      521
    2. 2
      PsYcHoKiLLa
      197
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!