Is There Any Way To Show That An Issue Has Been Resolved?


Recommended Posts

I see a lot of threads where people are asking for advice with hardware or software and usually the good folks here on Neowin help the OP to get their problem sorted but once it has been resolved people keep replying to the thread with more and more advice. I know that really people should read through the whole topic before replying to take any extra info into account or to see if it has been resolved but sometimes threads have multiple pages of replies and if you are in a rush but want to give advice then you don't always have time to read through it all.

I was just wondering if there was any way to allow the OP of a thread in software/hardware help forums to be able to add a [resolved] tag to the front of the thread title after the edit period has run out, this would also make it easier for people with similar problems who are looking for help as they would know the thread is not going to be a dead end.

Thoughts?

  • Like 2

I think this would be a good idea

even if there was a button that added [Resolved[ tot he start of the topic title and closed the thread

I think this would be a good idea

even if there was a button that added [Resolved[ tot he start of the topic title and closed the thread

Yeah that's what I was thinking, either next to the edit button or the edit button could be replaced by it when the edit period had run out.

This is a pretty good idea. The only issue is that many people offer their opinions or some more useful information on the subject even after the question is resolved, and adding [Resolved] to the title might discourage that.

Next version of IPB has a best answer feature built in, doubt Neowin will upgrade for quite a while though.

http://community.invisionpower.com/blog/1174/entry-8192-ipboard-34-dev-update-best-answer-feature/

I really don't mind other advice in those threads, because sometimes some really good advice is given but like you, I would like to see it marked Solved, so everyone would know not to keep replying to the original problem.

Next version of IPB has a best answer feature built in, doubt Neowin will upgrade for quite a while though.

http://community.inv...answer-feature/

I think that would be the best solution, so that people don't keep answering the question over and over again, but contribute to the discussion. Also so that other people would know where the answer is if they have the same question.

A tag would serve nicely to mark the issue as solved.

3.4 will come with a "best answer" vote feature which will mark topics as solved, we'll be upgrading to it (I hear it will release at the end of the year). :)

  • Like 2

3.4 will come with a "best answer" vote feature which will mark topics as solved, we'll be upgrading to it (I hear it will release at the end of the year). :)

Awesome :D Glad to hear you're doing the upgrade, quite a few nice features from what I've read :)

It's a good idea, but can we not have the option to close the thread? I've learned some great things here over the years from people that have started their posts with, "I know your problem has been solved, but here's some handy tips..."

If posters get given the option to close the thread when their question is answered, these responses will not happen.

I will never support threads being closed when they're resolved. I've seen many examples of "solved" threads being used for a related issue as well ;)

  • Like 3
This topic is now closed to further replies.
  • Posts

    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      455
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!