Post Your Workstation Photos


Recommended Posts

nice dektop, wots that thing under ur monitor?

That's a power switch.. I use it to power on the various lights around the work area. I also use it to power on and off the scanner, as it does not come equipped with a power switch. I didn't plug anything else in there... I'm paranoid about overloads, so I make sure that I use different outlets for stuff.

I thought I would post new pix and present my work station the right way

:blush:

My Workstation - Cleaned Up

My Workstation - Close Up

My Workstation - Side Angle

My Workstation - Case and Closet

My Workstation - With da dawg in da houze

As for the last pic... Well, Jak wanted to in on the act too, so I thought I just go with it. Dogs just wanna have fun!

:D

EDIT: Fixed a crapped up pic and a broken link. Jeez! :happy:

Edited by DELTA75329
I thought I would post new pix and present my work station the right way

:blush:

My Workstation - Cleaned Up

My Workstation - Close Up

My Workstation - Side Angle

My Workstation - Case and Closet

My Workstation - With da dawg in da houze

As for the last pic... Well, Jak wanted to in on the act too, so I thought I just go with it. Dogs just wanna have fun!

:D

last pic is a dead link

I thought I would post new pix and present my work station the right way

:blush:

My Workstation - Cleaned Up

My Workstation - Close Up

My Workstation - Side Angle

My Workstation - Case and Closet

My Workstation - With da dawg in da houze

As for the last pic... Well, Jak wanted to in on the act too, so I thought I just go with it. Dogs just wanna have fun!

:D

Ah, a fellow Trekkie! I don't have all those...Trek-things like you do though. I'm curious--where'd you get that model of the Enterprise-E?

desktop_1.jpg

desktop_2.jpg

sony mdr-cd180 headphones (kickass for the price),aiwa speakers (old but sound good :D ), cd case (donno whats in it :p ), wooden cd case with my movies in it, MSN DVD Cases, Zip 100.

desktop_3.jpg

my speaker, pda, and DirecTV reciver

*Note: my desk lasted about 5 minutes before it was disorganized again :p

I thought I would post new pix and present my work station the right way

:blush:

My Workstation - Cleaned Up

My Workstation - Close Up

My Workstation - Side Angle

My Workstation - Case and Closet

My Workstation - With da dawg in da houze

As for the last pic... Well, Jak wanted to in on the act too, so I thought I just go with it. Dogs just wanna have fun!

:D

Ah, a fellow Trekkie! I don't have all those...Trek-things like you do though. I'm curious--where'd you get that model of the Enterprise-E?

Fixed the busted link --- Sorry!

As for the Enterprise E... I special ordered it in 1996 when First Contact was released. The Franklin Mint had a select few that were meant to be collector's items. I opened the box of course, as I have no intention of parting with it!

;)

If you're interested, here is the link: http://www.franklinmint.com/

I doubt they still have it, but you can always search eBay.

Front tower

Inside

Me, im on the left playing chess with my cousin

Im gonna be water cooling my system soon, ill upload some pics of that once i got it setup correctly, ive also installed a Variable resistor in my memory so i can overclock the memspeeds (wacking more volts through), I hope to get all the kit in about 6 weeks.

Front tower

Inside

Me, im on the left playing chess with my cousin

Im gonna be water cooling my system soon, ill upload some pics of that once i got it setup correctly, ive also installed a Variable resistor in my memory so i can overclock the memspeeds (wacking more volts through), I hope to get all the kit in about 6 weeks.

Nice setup...! Looks like an MSI vid card in there... I was curious, you mentioned doin' some water cooling. What are you current temps now? I mean, are they an issue? Or is the water cooling a solution so that you can o/c even higher?

Well ive experienced crashes during games, because im overclocking a 2.26 to 2.8 the temps can hike pretty high - its 40C on normal use (which is good) but 50C+ on gaming (which explains the crahes lol).

Ive dropped it down now to 2.26 and its 29C normal use (didnt want to bugger my chip), when I water cool it i wanna go 3ghz , and the temps should be really low.

Ive heard people can go further, thats why i did the variable resistor on my memory, that will help.

I dont know what kit im gonna buy and im posting around on other forums to see whats the best one. ive got ?250 to spend so I hope thats enough. :rolleyes:: :blush::

oh erm, my graphics card is a Gainward Geforce4 ti4200 128mb 650xp Goldensample - it was good when I got it but there are loads of cards that can cain it pretty hard lol, im waiting out for the Geforce FX.

Yea, that explains it. :D Intels in general run far cooler than AMDs, but they can't tolorate the high temps like the AMD can. All things considered, I'd rather be at Intel's temps: I lost my Athlon 1.4 T-Bird due to overheat, and it wasn't even overclocked. It would post temps of around 60c. I guess I should have gotten an air conditioner for the basement sooner! :blush: Lucky for me though, my Athlon XP 2000+ runs under 50c now, and never passes over 53c on full load, which is great for an AMD.

I don't know if a 2.26 will go to a 3g, but you never know until you try. Let us know how it turns out when you integrate the new water cooler.

:)

well, i have me server pics :D.. im toooo lazy to take a pic of my "workstation"

[ Warning 56ers, large images! ]

hxxp://www.skatemanknight.com/pics.html

lol i got an old armada laptop too mines a 1700 whats urs?

i think thats it.. im too lazy to go look lol :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.
    • Hey what's about the proton vpn firefox extension ? It's not working today
    • On what though? Not Ray Tracing.
    • Agreed, but now my muscle memory immediately creates a layer for each text portion, so editing is made a little easier.
    • Happy for him, it is one of the first apps I install on a new Windows machine, been using it for years!
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      136
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!