Recommended Posts

NORRIDGEWOCK ? Michael Smith went outside shirtless after being awakened Tuesday morning, yelling at a tree removal company to get off his property.

The workers thought they saw a gun in his waistband and called police.

Smith, who?d gone back to bed, was awakened again minutes later ? this time by Maine State Police at his front door, backed up by a group of troopers with assault rifles in his driveway. They were asking him via a megaphone to come out of his house.

Smith did have a gun. It was tattooed on his stomach.

No charges will be filed against Smith, but police said they always take reports of a gun or threat seriously. Several police standoffs with armed men have occurred in central Maine in recent years, some of them deadly.

?Obviously it was a misunderstanding and he didn?t have a weapon, but we had to respond to the initial report as if he did,? Maine State Police Trooper Scott Duff said. ?We take all precautions when we don?t have the details.?

Smith was asleep at his home, about 10 a.m. Tuesday when he heard a loud noise outside his window. He said it sounded as though someone was driving up his driveway and crunching the thick layer of ice on it.

Smith, who works nights, said he was still asleep and was surprised to see a crew of workers from Lucas Tree Experts preparing to saw a number of trees around some power lines on his property.

Wearing just a pair of pants and no shirt, though the temperature was in the teens, he went outside and asked them to leave.

The tree removal company workers reported that as they backed into the driveway, Smith told them not to cut the trees. They told him it was not a problem.

Smith went back to bed; but as the workers were leaving, one thought he saw a pistol in Smith?s waistband.

That?s when they called the police, momentarily prompting reports of a police standoff.

?They weren?t 100 percent sure what he was saying,? Duff said, ?but he was yelling and they thought it could be some sort of a threat. They thought he was yelling something to the effect of doing harm, but when we got a hold of him, it ended up just being a tattoo.?

It was all just a misunderstanding, both Smith and police said.

The tattoo of the life-size handgun is positioned on Smith?s body to look as if the barrel of the gun is tucked into the waist of his pants. He said he doesn?t regret getting it, even though this isn?t the first time the tattoo has been the focus of police attention.

more

Link to comment
https://www.neowin.net/forum/topic/1205731-gun-tattoo-brings-swat-team-to-home/
Share on other sites

And it also sounds like the tree guys need to get their eyes examined! :s

Did you see the picture?

 

20140319_458819_xml_2014_0318_tattoo_1.j

 

The tattoo could easily be confused with a real gun from a distance and I'm sure that was his intent. He looks like a thoroughly unpleasant individual.

Did you see the picture?

 

20140319_458819_xml_2014_0318_tattoo_1.j

 

The tattoo could easily be confused with a real gun from a distance and I'm sure that was his intent. He looks like a thoroughly unpleasant individual.

 

 

Uhh,  No.   If I saw that, I'd take notice it wasn't real.  I'd also look for a bulge in that area.  I'd also notice the "trigger is up above, so if the pants are as low, that much of the barrel would make it fall out.  

 

 

What a complete waste of tax dollars. 

Uhh,  No.   If I saw that, I'd take notice it wasn't real.  I'd also look for a bulge in that area.  I'd also notice the "trigger is up above, so if the pants are as low, that much of the barrel would make it fall out.  

 

 

What a complete waste of tax dollars. 

 

yes, in good light, and with enough time to stand there and study it sure you would notice all that. 

 

in the dim morning light where you only see the shadow of it, and you only glimpse it as he's turning around, no you wouldn't. also his pants could have been much higher up when he was out the first time. but again with only a glimpse of a shadow shaped like a gun... yeah you'd assume it was a gun. 

  • Like 1

Problem is that if legally owned he could have had a weapon in his waist belt and it still would not have been an illegal act, only brandishing it or threatening with it are illegal, the police should fine the tree people for wasting their time and money 

  • Like 2

Problem is that if legally owned he could have had a weapon in his waist belt and it still would not have been an illegal act, only brandishing it or threatening with it are illegal, the police should fine the tree people for wasting their time and money 

 

Well sicne they know the adress, I'm sure the cops could look up if he had a license before they went out. 

 

and either way, going out topless, with a gun sticking out of your waist could be considered brandishing, it's not exactly holstered, it's an agressive brandishing of the gun, a holster is neutral, ish...

yes, in good light, and with enough time to stand there and study it sure you would notice all that. 

 

in the dim morning light where you only see the shadow of it, and you only glimpse it as he's turning around, no you wouldn't. also his pants could have been much higher up when he was out the first time. but again with only a glimpse of a shadow shaped like a gun... yeah you'd assume it was a gun. 

From that picture, it looks like mid day or late afternoon.  911 call goes out, press follows (usually in most places anyway) so it can't be too long after the call was made.    People need to think though.  "Oh, he has a gun, is he pointing it at me? no? ok then"

 

I here in PA, were openly carrying at a Wawa talking to a friend who works there as they were making me a sub.   It was holstered.  Some guy from New Jersey thought it would be great to call 911 to report "A man with a gun at wawa".  Police showed up as I was still talking.  Looked at me, "Do you have a license to carry?" I said "Yes, but I don't need one to conceal so you may not see it".   They said "have a good day" they told the guy from NJ who was ###### " I Can't do that in my state! Why can they do it here?!"  

 

Some people are just a joke.   

 

I got a chance to look at the text from the 911 call comments because I FOI requested it.  It was along the lines of "Male with a gun standing in Wawa talking,  non violent.  Is holstered"  

 

Well sicne they know the adress, I'm sure the cops could look up if he had a license before they went out. 

 

and either way, going out topless, with a gun sticking out of your waist could be considered brandishing, it's not exactly holstered, it's an agressive brandishing of the gun, a holster is neutral, ish...

 

Depending if they have open carry laws or not.  If they do, then he's ok. 

tree removal company workers reported ...

 

Nice to see people can't mind their own business.

 

They could of asked him about the 'gun'.

 

 

There's a brilliant idea: go knock on the guy's door who just came out screaming at you if he has a gun.

 

 

 People need to think though.  "Oh, he has a gun, is he pointing it at me? no? ok then"

 

Such a foreign idea to me, and probably many others. "This guy yelling at me has a gun (or, at least, I mistake him having a gun) but if he doesn't actually pull it out I shouldn't be concerned".

Did you see the picture?

 

20140319_458819_xml_2014_0318_tattoo_1.j

 

The tattoo could easily be confused with a real gun from a distance and I'm sure that was his intent. He looks like a thoroughly unpleasant individual.

 

I bet he will be telling the story of how he "bested" the police for years to come.

yes, in good light, and with enough time to stand there and study it sure you would notice all that. 

 

in the dim morning light where you only see the shadow of it, and you only glimpse it as he's turning around, no you wouldn't. also his pants could have been much higher up when he was out the first time. but again with only a glimpse of a shadow shaped like a gun... yeah you'd assume it was a gun. 

 

10am is not "dim morning light".

This topic is now closed to further replies.
  • Posts

    • Halo: Campaign Evolved is out next month with new prequel missions by Pulasthi Ariyasinghe Microsoft offered a look at the upcoming Halo: Combat Evolved remake at the Xbox Games Showcase today. The Halo Studios-developed title is not only getting a fully remade campaign, but also new content in the form of a fresh story arc featuring Sgt. Johnson. Fans don't have to wait long, either, as Halo: Campaign Evolved is releasing next month. The new content joining the original campaign consists of three new missions that have the name "Operation: METEORITE" attached to the full project. Aside from ground-based combat, space missions are also included here. These prequel missions will take players to events set before the original campaign, where the Master Chief and Sgt. Johnson duo team up for a clandestine UNSC operation aboard a Covenant research vessel. The studio says that the story for these missions was written in collaboration with award-winning sci-fi author Troy Denning. "Operation: METEORITE gives players a chance to expand their experience with new locations, new enemy variants, more weapons from across the Halo series, and new ways to play within the Halo sandbox, all while getting to spend more time with beloved characters and witness a new event that adds to the legacy of their heroic history," adds Halo Studios. Today's new trailer showed off the game in action, including the new missions. Catch it below. Halo Campaign Evolved is coming out on July 28, 2026. It will be available across PC, Xbox Series X|S, and PlayStation 5 with a $49.99 price tag. A digital premium edition will also be available for $69.99, offering five days of early access, extra in-game skins, and a digital art collection. A $199.99 physical Collector's Edition is also incoming, bringing a Master Chief statue, a Cortana chip, a Steelbook case, and more.
    • To give context to everybody, I bought about 2 sets of RAM, ddr4, 3200, 64 gb, 2 years ago. It costed me 150 usd for each set. If you buy RAM now you only incentivate companies to sell you expensive stuff, as Nvidia did.
    • KillerPDF 1.4.2 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.4.2 changelog: What's new PDF form filling. Interactive PDF forms now render their fields (text inputs, checkboxes, radio buttons) as live controls. Fill them in directly and save — field values are written back into the PDF. PDF outline (bookmark) navigation. A new OUTLINES tab in the sidebar displays the document's bookmark tree. Click any entry to jump to that page. The sidebar auto-fits its width to the longest entry on open and can be dragged wider; switching back to PAGES snaps to the pages-mode width. Fixed Page rotation no longer reverts after saving. Rotations applied via the sidebar context menu now persist correctly through the save pipeline. Copied text words were out of order on PDFs where glyphs are stored in non-reading order (Issue #66). Text extraction now sorts words by position and uses a dynamic line-grouping threshold so both drag-select and Select All produce correctly ordered output. PDFs with malformed or non-standard XRef tables now open in read-only mode instead of showing "Invalid entry in XRef table" and failing entirely. Download: KillerPDF 1.4.2 | 6.1 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "...a low price of just $340..." I don't think it means what you think it means.
    • This Corsair Vengeance DDR5-6000 32GB RAM with RGB is a great deal for limited time by Sayan Sen Memory prices have been through the roof for a while, though it seems like things might finally be getting better. If you are in the market for one, then grab this Corsair Vengeance DDR5 32GB (2x16GB) DDR5 6000 CL36 kit with RGB for a low price of just $340 (purchase link under the specs table down below). The kit is compatible with both AMD and Intel systems as it supports both EXPO and XMP overclocking profiles, respectively. 6000 MT/s is often the sweet spot for many systems as it provides ample data transfer speed while still being on Gear 1 mode. This Vengeance variant has RGB so if you love bright setups with such lighting, this is a win-win for you. The technical specifications of the Corsair Vengeance memory kit are given in the table below: Specification Value Memory Type DDR5 Memory Size (Total) 32GB Kit Configuration 2 × 16GB Form Factor UDIMM (Desktop) Pin Count 288-pin Speed (Data Rate) 6000 MT/s Speed Rating PC5-48000 Tested CAS Latency 38-44-44-96 Voltage (Tested) 1.35V Performance Profile AMD EXPO & Intel XMP Heat Spreader Aluminum heatspreader Cooling Type Passive (Heatsink) Lighting Ten Zone RGB Software Support Corsair iCUE Get it at the link below: CORSAIR Vengeance RGB DDR5 32GB (2 x 16GB) 6000 CL38 – Gray (CMH32GX5M1E6000Z38): $339.99 (Sold and Shipped by Woot US, Fulfilled by Amazon US) This Woot deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      66
    5. 5
      Skyfrog
      65
  • Tell a friend

    Love Neowin? Tell a friend!