Recommended Posts

Likely DDR, then they'll do WDR to make sure there aren't any issues going into tomorrow. Procedures finalization and such, from rollout on down the line. Giving themselves more experience at getting FH out to the Pad from Step XXX.XX and so on.

 

No reason not to, after all. They're SpaceX and they don't want anything biting them in the ass. Not with all eyes on them Tuesday.

1 hour ago, Skiver said:

Can someone explain DDR and WDR for the uninformed? 

DDR = Dry Dress Rehearsal 

WDR = Wet Dress Rehearsal

 

Basically simulating launch from the rollout to the moment of takeoff, without actually doing so. Only difference with the Wet one is that propellant is loaded in. 

  • Like 2
2 hours ago, John. said:

DDR = Dry Dress Rehearsal 

WDR = Wet Dress Rehearsal

 

Basically simulating launch from the rollout to the moment of takeoff, without actually doing so. Only difference with the Wet one is that propellant is loaded in. 

Ah, cheers :D

YouTube caption

 


Uploaded on 5 Feb 2018 When Falcon Heavy lifts off, it will be the most powerful operational rocket in the world by a factor of two.  With the ability to lift into orbit nearly 64 metric tons (141,000 lb)---a mass greater than a 737 jetliner loaded with passengers, crew, luggage and fuel--Falcon Heavy can lift more than twice the payload of the next closest operational vehicle, the Delta IV Heavy, at one-third the cost.

Falcon Heavy's first stage is composed of three Falcon 9 nine-engine cores whose 27 Merlin engines together generate more than 5 million pounds of thrust at liftoff, equal to approximately eighteen 747 aircraft. 

Following liftoff, the two side boosters separate from the center core and return to landing sites for future reuse.  The center core, traveling further and faster than the side boosters, also returns for reuse, but lands on a drone ship located in the Atlantic Ocean.

At max velocity the Roadster will travel 11 km/s (7mi/s) and travel 400 million km (250 million mi) from Earth.  

Falcon Heavy was designed from the outset to carry humans into space and restores the possibility of flying missions with crew to the Moon or Mars.

 

400m km is just shy of Ceres orbit. A slap to SLS's chops.

  • Like 1

Yeah to all of the above. That's gonna be the real chore. LOX/LHe boiloff and the batteries dying out will be the things to watch out for. If the S2 blows, we'll know that LOX/LHe boiloff (and the resulting expansion) occurred and ruptured the tank.

 

If absolutely nothing happens, and the S2 simply "stops responding" but is intact, we'll know that the batteries croaked.

 

Pretty easy to post-mortem it ahead of time when you already know what can go wrong. :yes: Here's hoping that it doesn't.

Patch and timeline from the press kit, which contains the pre- and post- launch event timelines.

 

5a79281ac194c_FH1_pach.thumb.jpg.d84f2119b9f4473d77126aebc08c365f.jpg

 

Mission Timeline (all times approximate)


COUNTDOWN 


Hour/Min/Sec Events


- 01:28:00 SpaceX Launch Director verifies go for propellant load
- 01:25:00 RP-1 (rocket grade kerosene) loading underway 
- 00:45:00 LOX (liquid oxygen) loading underway 
- 00:07:00 Falcon Heavy begins engine chill prior to launch 
- 00:01:00 Flight computer commanded to begin final prelaunch checks 
- 00:01:00 Propellant tank pressurization to flight pressure begins
- 00:00:45 SpaceX Launch Director verifies go for launch
- 00:00:05 Engine controller commands side booster engine ignition sequence to start
- 00:00:03 Engine controller commands center core engine ignition sequence to start 
- 00:00:00 Falcon Heavy liftoff


LAUNCH, LANDINGS AND ORBITAL INSERTION


Hour/Min/Sec Events


00:01:06 Max Q (moment of peak mechanical stress on the rocket)
00:02:29 Booster engine cutoff (BECO)
00:02:33 Side cores separate from center core
00:02:50 Side cores begin boostback burn
00:03:04 Center core engine shutdown/main engine cutoff (MECO)
00:03:07 Center core and 2nd stage separate
00:03:15 2nd stage engine starts
00:03:24 Center core begins boostback burn
00:03:49 Fairing deployment
00:06:41 Side cores begin entry burn
00:06:47 Center core begins entry burn
00:07:58 Side core landings
00:08:19 Center core landing
00:08:31 2nd stage engine cutoff (SECO-1)
00:28:22 2nd stage engine restarts
00:28:52 2nd stage engine cutoff (SECO-2)
Mission continues on an experimental long coast and third stage two burn to 
target a precessing Earth-Mars elliptical orbit around the sun

I've been struggling to find an answer to this, can anyone explain the orbit that the Tesla is going to make?

 

My understanding in the most basic terms is that it will enter a Heliocentric Orbit and only pass "near" Mars and will basically continue to orbit around Earth/Mars for billions of years, Sort of an apogee of Mars and perigee around Earth? The part I struggle to understand is that I'm under the belief that a Mars orbit around the sun is not far from being twice that of Earth so surely there will be times where the distance between is a lot greater so a "stable" orbit would not be possible without constant corrections?

 

Also, is there an estimate around how long it will take for the Tesla to get to its apogee around Mars?

 

Sorry for the extreme lack of understanding but I find all of this incredibly interesting but don't have the knowledge to understand half of it.

  • Like 1

The orbit will be an elliptical path around the Sun, with an apogee beyond Mars orbit and a perigee near Earth's orbit. At intervals it'll come near each planet. This would be similar to, but not the same as, an Aldrin Cycler orbit. Just a different form of Mars Cycler.

 

An Aldrin Cycler orbit is stable and was designed by Buzz Aldrin as a logistical orbit for supplying a Mars base, or one on a Martian moon. What varies with planetary positions is the transit time.

 

Its first pass by Mars orbit should take several months.

 

 

5a7994dc23835_AldrinCycler2.thumb.jpg.343d9ab34264b71981951699b9a5e7e1.jpg

 

 

 

 

Edited by DocM
  • Like 2

Yep, it'll be out near Ceres' orbit at its' apogee. :yes: Over time, the characteristics of the orbit will modify somewhat due to gravitational influences, but not a lot. Pretty stable orbit actually.

Something that just occurred to me -- the tires. Those are going to be put to the test, I think. Not in the usual way, though ... :laugh:

 

Hope they remembered to let the air out of 'em. Otherwise there's gonna be lots and lots of debris if they let go.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If you actually used it instead of responding like a petulant child you might be surprised. I switched from Google some time ago and have been very satisfied.
    • I am one of the first people to use the DXVK technology. In the channel below you can see some videos that I have made using this technology, including Assassin's Creed Odyssey. https://www.youtube.com/@nahum7995/videos Assassin's Creed Odyssey experienced several bugs and technical issues during its first months after release. It launched with its own fair share of funny but frustrating glitches. I ran it on DXVK 9 days after its release and I played it for many hours but didn't see a single significant bug on Linux. Assassin's Creed Odyssey is widely celebrated for pushing the franchise in bold new directions and specifically for nailing several elements better than any other title in the AC series: Player Choice & Branching Narrative, The Mercenary & Cultist System, Mythological Integration, Overpowered Combat Abilities, Open World Exploration But what I'm trying to point out is that this game wasn't quite playable on most windows systems, until a few months after its release when most of the bugs were fixed. However, on Linux it ran completely flawless from day one, although DXVK had seen little development and refinement at the time. What do you think the situation will be in 2026 now that most bugs and glitches of DXVK have been completely eliminated? This is information from Google about these situations that I am quoting. In many cases, using DXVK (a translation layer that converts DirectX 9, 10, or 11 into Vulkan) can result in more stable frame times and higher performance than native Windows rendering. This happens primarily by bypassing driver overhead and multithreading draw calls that were previously restricted to a single CPU core. Older APIs (like DirectX 9 and 11) are largely single-threaded on the CPU side. DXVK translates these calls to Vulkan, which is highly multi-threaded. This reduces CPU-bound stuttering on weaker processors. In certain cases, GPU manufacturers (especially AMD) have significantly better and more modern Vulkan drivers than they do for legacy DirectX. Vulkan gives developers—and in this case, the translation layer—closer control over how resources are held in VRAM. This can prevent micro-stutters and sudden frame drops during chaotic gameplay. Yes, certain games, particularly older DirectX 9 to 11 titles, can run with fewer crashes on DXVK than on native Windows. By intercepting DirectX draw calls and translating them into the modern, highly efficient Vulkan API, DXVK bypasses the limitations and poor driver support that cause instability in aging game engines. PlayStation 1, PlayStation 2 and PlayStation 3 can be easily and perfectly emulated on Linux. In fact, modern Linux emulators offer high-performance upscaling, widescreen patches, and automatic controller mapping out of the box.                                                                                                                                                                                                                                                                                                                                 PlayStation 1/2/3 games look drastically better on Linux thanks to resolution upscaling. Furthermore, it is also a fact that you cannot play many fun games on Windows either, isn't it? - The Nintendo Switch has an extensive library of exclusive games. - PlayStation has an extensive library of exclusive games - Android has "mobile-exclusive" games, meaning they are exclusive to mobile devices (iOS and Android) and aren't available on PC or consoles. And finally, it is also the case that in the next five years there will be games that millions of people will say you absolutely must play and that they want to play this specific game that released a few days ago. However, the other side of this story is that currently, absolutely no one cares that they cannot play these upcoming games right now.
    • Flameshot 14.0 RC3 by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 RC3 changelog: Translations update from Hosted Weblate by @weblate in #4612 Translations update from Hosted Weblate by @weblate in #4619 Fix pin position on Windows for scaled screen by @ElTh0r0 in #4614 Cmake Analyzers by @ElTh0r0 in #4613 Translations update from Hosted Weblate by @weblate in #4632 fix(macos): prevent config tab content from rendering behind tab bar by @Mitnitsky in #4627 fix(macos): use CGRequestScreenCaptureAccess instead of grabWindow for permission request by @Mitnitsky in #4617 Fix KDE Plasma keyboard shortcut config file by @ElTh0r0 in #4637 fix(macos): fix clipboard copy failing from tray and GUI by @Mitnitsky in #4629 feature(macos): show dock icon when config window is open by @Mitnitsky in #4628 Option to disable tray icon on Windows by @ElTh0r0 in #4634 Translations update from Hosted Weblate by @weblate in #4642 fix(macos): make fullscreen capture overlay configurable by @Mitnitsky in #4622 Update GH actions using Node.js 24 by @ElTh0r0 in #4660 fix issue with screen selection in non interactive mode by @borgmanJeremy in #4667 Uniformize both spec files + ninja build openSUSE by @QuentiumYT in #4658 screengrabber: pass non-empty parent_window to xdg-desktop-portal by @artefaktor93 in #4664 Allow multiple flameshot GUI instances (fix for #3177) by @ElTh0r0 in #4680 Unify Linux ARM CI into Linux CI (also drop QEMU) by @theofficialgman in #4702 respect system proxy settings by @borgmanJeremy in #4674 Replace ifdef LINUX with UNIX to include BSD systems by @ElTh0r0 in #4700 Download: Flameshot 14.0 RC3 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I found that stability back then was really down to the motherboard manufacturer. Back then i stuck with Microstar motherboards and VIA chipsets as they were ultra reliable. Most stuff was done with jumpers and left little room for user created problems 👍
  • Recent Achievements

    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
    • Apprentice
      JoeyNeo went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      490
    2. 2
      PsYcHoKiLLa
      232
    3. 3
      Skyfrog
      78
    4. 4
      FloatingFatMan
      68
    5. 5
      Michael Scrip
      58
  • Tell a friend

    Love Neowin? Tell a friend!