Recommended Posts

Likely DDR, then they'll do WDR to make sure there aren't any issues going into tomorrow. Procedures finalization and such, from rollout on down the line. Giving themselves more experience at getting FH out to the Pad from Step XXX.XX and so on.

 

No reason not to, after all. They're SpaceX and they don't want anything biting them in the ass. Not with all eyes on them Tuesday.

1 hour ago, Skiver said:

Can someone explain DDR and WDR for the uninformed? 

DDR = Dry Dress Rehearsal 

WDR = Wet Dress Rehearsal

 

Basically simulating launch from the rollout to the moment of takeoff, without actually doing so. Only difference with the Wet one is that propellant is loaded in. 

  • Like 2
2 hours ago, John. said:

DDR = Dry Dress Rehearsal 

WDR = Wet Dress Rehearsal

 

Basically simulating launch from the rollout to the moment of takeoff, without actually doing so. Only difference with the Wet one is that propellant is loaded in. 

Ah, cheers :D

YouTube caption

 


Uploaded on 5 Feb 2018 When Falcon Heavy lifts off, it will be the most powerful operational rocket in the world by a factor of two.  With the ability to lift into orbit nearly 64 metric tons (141,000 lb)---a mass greater than a 737 jetliner loaded with passengers, crew, luggage and fuel--Falcon Heavy can lift more than twice the payload of the next closest operational vehicle, the Delta IV Heavy, at one-third the cost.

Falcon Heavy's first stage is composed of three Falcon 9 nine-engine cores whose 27 Merlin engines together generate more than 5 million pounds of thrust at liftoff, equal to approximately eighteen 747 aircraft. 

Following liftoff, the two side boosters separate from the center core and return to landing sites for future reuse.  The center core, traveling further and faster than the side boosters, also returns for reuse, but lands on a drone ship located in the Atlantic Ocean.

At max velocity the Roadster will travel 11 km/s (7mi/s) and travel 400 million km (250 million mi) from Earth.  

Falcon Heavy was designed from the outset to carry humans into space and restores the possibility of flying missions with crew to the Moon or Mars.

 

400m km is just shy of Ceres orbit. A slap to SLS's chops.

  • Like 1

Yeah to all of the above. That's gonna be the real chore. LOX/LHe boiloff and the batteries dying out will be the things to watch out for. If the S2 blows, we'll know that LOX/LHe boiloff (and the resulting expansion) occurred and ruptured the tank.

 

If absolutely nothing happens, and the S2 simply "stops responding" but is intact, we'll know that the batteries croaked.

 

Pretty easy to post-mortem it ahead of time when you already know what can go wrong. :yes: Here's hoping that it doesn't.

Patch and timeline from the press kit, which contains the pre- and post- launch event timelines.

 

5a79281ac194c_FH1_pach.thumb.jpg.d84f2119b9f4473d77126aebc08c365f.jpg

 

Mission Timeline (all times approximate)


COUNTDOWN 


Hour/Min/Sec Events


- 01:28:00 SpaceX Launch Director verifies go for propellant load
- 01:25:00 RP-1 (rocket grade kerosene) loading underway 
- 00:45:00 LOX (liquid oxygen) loading underway 
- 00:07:00 Falcon Heavy begins engine chill prior to launch 
- 00:01:00 Flight computer commanded to begin final prelaunch checks 
- 00:01:00 Propellant tank pressurization to flight pressure begins
- 00:00:45 SpaceX Launch Director verifies go for launch
- 00:00:05 Engine controller commands side booster engine ignition sequence to start
- 00:00:03 Engine controller commands center core engine ignition sequence to start 
- 00:00:00 Falcon Heavy liftoff


LAUNCH, LANDINGS AND ORBITAL INSERTION


Hour/Min/Sec Events


00:01:06 Max Q (moment of peak mechanical stress on the rocket)
00:02:29 Booster engine cutoff (BECO)
00:02:33 Side cores separate from center core
00:02:50 Side cores begin boostback burn
00:03:04 Center core engine shutdown/main engine cutoff (MECO)
00:03:07 Center core and 2nd stage separate
00:03:15 2nd stage engine starts
00:03:24 Center core begins boostback burn
00:03:49 Fairing deployment
00:06:41 Side cores begin entry burn
00:06:47 Center core begins entry burn
00:07:58 Side core landings
00:08:19 Center core landing
00:08:31 2nd stage engine cutoff (SECO-1)
00:28:22 2nd stage engine restarts
00:28:52 2nd stage engine cutoff (SECO-2)
Mission continues on an experimental long coast and third stage two burn to 
target a precessing Earth-Mars elliptical orbit around the sun

I've been struggling to find an answer to this, can anyone explain the orbit that the Tesla is going to make?

 

My understanding in the most basic terms is that it will enter a Heliocentric Orbit and only pass "near" Mars and will basically continue to orbit around Earth/Mars for billions of years, Sort of an apogee of Mars and perigee around Earth? The part I struggle to understand is that I'm under the belief that a Mars orbit around the sun is not far from being twice that of Earth so surely there will be times where the distance between is a lot greater so a "stable" orbit would not be possible without constant corrections?

 

Also, is there an estimate around how long it will take for the Tesla to get to its apogee around Mars?

 

Sorry for the extreme lack of understanding but I find all of this incredibly interesting but don't have the knowledge to understand half of it.

  • Like 1

The orbit will be an elliptical path around the Sun, with an apogee beyond Mars orbit and a perigee near Earth's orbit. At intervals it'll come near each planet. This would be similar to, but not the same as, an Aldrin Cycler orbit. Just a different form of Mars Cycler.

 

An Aldrin Cycler orbit is stable and was designed by Buzz Aldrin as a logistical orbit for supplying a Mars base, or one on a Martian moon. What varies with planetary positions is the transit time.

 

Its first pass by Mars orbit should take several months.

 

 

5a7994dc23835_AldrinCycler2.thumb.jpg.343d9ab34264b71981951699b9a5e7e1.jpg

 

 

 

 

Edited by DocM
  • Like 2

Yep, it'll be out near Ceres' orbit at its' apogee. :yes: Over time, the characteristics of the orbit will modify somewhat due to gravitational influences, but not a lot. Pretty stable orbit actually.

Something that just occurred to me -- the tires. Those are going to be put to the test, I think. Not in the usual way, though ... :laugh:

 

Hope they remembered to let the air out of 'em. Otherwise there's gonna be lots and lots of debris if they let go.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Still using Classic Outlook? Microsoft highlights 15 reasons to switch to New Outlook by Usama Jawad As many of you may know, Microsoft has been trying to get customers to ditch Classic Outlook in favor of New Outlook for quite some time now. To that end, it has added numerous capabilities to the latter, including PST features, and it is working on several more, such as a unified inbox. However, customer response has been a bit lukewarm so far, with many considering the New Outlook to be "hot garbage". Now, Microsoft has highlighted 15 features that users can leverage in New Outlook in yet another attempt to get customers to migrate. Although not all of the 15 capabilities are exclusive to New Outlook, in fact, most of them are available in Classic Outlook as well. But Microsoft hopes that this combination of familiar and fresh features will be able to attract existing users as well as new ones. For ease of readability, we have summarized the 15 features below: Pin an email: This makes it easier to track important emails Snooze an email: You can temporarily snooze an email thread for a specific time frame until it becomes relevant again. This can be very useful in scenarios where you don't feel like actively following a thread or simply want to follow up on a later date Add multiple categories at the same time: You can assign multiple categories to an email through a single, simplified interface Sweep: As the name implies, you can define automated move processes on your inbox to declutter it, rather than cleaning it up manually Schedule send: Does exactly what it says on the tin, and can be useful when accommodating recipients in different timezones Simplified folder sharing: The sharing process has been simplified so permissions are automatically applied on parent folders Follow a meeting: This is an RSVP option that lets people know that you won't be able to join the meeting but would still like to access a recap Save calendar views: You can save different views for the calendar based on different workflows Improved meeting tracking: Organizers have more controls in viewing meeting responses, such as the ability to sort and download them. Typically useful when there is a large audience Meeting recap: The Outlook Calendar surfaces a meeting recap with recordings, transcripts, and shared files Filtered views: Allows you to declutter your Calendar so that it's easier to scan and schedule Change a recurring event: Users can modify future events of a series of meetings while preserving the configuration of previous ones Rename your email account: This labeling makes it easier to identify multiple accounts in Outlook Modern themes: Exactly what the name says, plus Dark Mode Keyboard shortcuts: This facilitates flexible user behavior as customers can choose between Outlook for Windows shortcuts, Outlook for the web, or turn them off completely There you have it. It's a decent list, but it remains to be seen if it will move the needle in a meaningful way for users who are attached to Classic Outlook. Again, a lot of the aforementioned features are already available in Outlook Classic, but for some, native functionality is not present, and people typically resort to workarounds. Microsoft will be hoping that it's primarily those capabilities that get people to finally switch.
    • Please I need help I been trying to find this secure boot on my ColorFul motherboard in the bios But i cant i turned off CSM everything watch every video i cant find it. BATTLE-AX B660M-HD DELUXE V20
    • LibreWolf 151.0.3-1 by Razvan Serea LibreWolf is an independent “fork” of Firefox, with the primary goals of privacy security and user freedom. It is the community run successor to LibreFox. LibreWolf is designed to increase protection against tracking and fingerprinting techniques, while also including a few security improvements. This is achieved through our privacy and security oriented settings and patches. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM. LibreWolf features: Latest Firefox — LibreWolf is compiled directly from the latest build of Firefox Stable. You will have the the latest features, and security updates. Independent Build — LibreWolf uses a build independent of Firefox and has its own settings, profile folder and installation path. As a result, it can be installed alongside Firefox or any other browser. No phoning home — Embedded server links and other calling home functions are removed. In other words, minimal background connections by default. User settings updates Extensions firewall: limit internet access for extensions. Multi-platform (Windows/Linux/Mac/and soon Android) Community-Driven Dark theme (classic and advanced) LibreWolf privacy features: Delete cookies and website data on close. Include only privacy respecting search engines like DuckDuckGo and Searx. Include uBlockOrigin with custom default filter lists, and Tracking Protection in strict mode, to block trackers and ads. Strip tracking elements from URLs, both natively and through uBO. Enable dFPI, also known as Total Cookie Protection. Enable RFP which is part of the Tor Uplift project. RFP is considered the best in class anti-fingerprinting solution, and its goal is to make users look the same and cover as many metrics as possible, in an effort to block fingerprinting techniques. Always display user language as en-US to websites, in order to protect the language used in the browser and in the OS. Disable WebGL, as it is a strong fingerprinting vector. Prevent access to the location services of the OS, and use Mozilla's location API instead of Google's API. Limit ICE candidates generation to a single interface when sharing video or audio during a videoconference. Force DNS and WebRTC inside the proxy, when one is being used. Trim cross-origin referrers, so that they don't include the full URI. Disable link prefetching and speculative connections. Disable disk cache and clear temporary files on close. Disable form autofill. Disable search and form history...and more. LibreWolf 151.0.3-1 changelog: Upstream release, see the Firefox 151.0.3 Release Notes Notable changes: Clears the preference toolkit.winRegisterApplicationRestart, which may otherwise trigger an upstream bug on Windows (librewolf/issues#3056) Download: LibreWolf 64-bit | Portable 64-bit | ~100.0 MB (Open Source) Download: ARM64 | Portable ARM64 Links: LibreWolf Home Page | Addons | Screenshot | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Unsurprisingly, there's what the law says and what the old white wealthy males legally enforce...
    • Or anything online that requires an anti-cheat
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      478
    2. 2
      PsYcHoKiLLa
      248
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      76
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!