Recommended Posts

On 5/17/2016 at 9:29 PM, Raphaël G. said:

I'm afraid the deadline is already exceeded :rofl: Would have been great though, if I had a lot of time on my hands :) 

 

So what's next for Dopamine?

 

This build is rather good, quality wise. I'd like to release version 1.0 final as soon as I have confirmation that there are no critical issues left. After the release of 1.0, my focus will shift to the UWP version. Development on the desktop version will continue however. While the current focus is now 100% desktop, 0% UWP, I'd like to shift that to 20% desktop, 80% UWP for a short period of time. And once the UWP version is published, it should become 50% for both.

The 20% for the desktop version will allow fixing bugs and adding small features.

 

The UWP version will start simple and as a phone application only. Because I want to publish quickly, I won't spend time building an adaptive UI yet. The desktop version can fill that gap for now. Adaptive UI will be added later. The app will be polished and dynamic, just like the dekstop version. They will look very similar.

 

wooo! Can't wait to see the UWP app! Very excited

On ‎7‎/‎06‎/‎2016 at 11:23 AM, ZipZapRap said:

wooo! Can't wait to see the UWP app! Very excited

I'm excited about it too. It's fun to make. I haven't written a line of code for Dopamine for the last 2 weeks however :( Daytime job is very demanding right now. I'm working almost day and night. Tomorrow I want to spend some time fixing small Dopamine desktop bugs and work on Dopamine mobile. Let's see how that goes :) 

  • Like 3
2 minutes ago, lisztomania said:

It's about 140 gigabytes, but it has already been scanned and indexed. Unless it scans constantly the memory shouldn't be that high I think. 

It doesn't to my knowledge but we'd probably need Raph to confirm.

 

I've got a 24GB library and I'm using about 65MB, so those numbers wouldn't add up if it is Library size dependant.

On ‎13‎/‎06‎/‎2016 at 1:13 PM, lisztomania said:

It's about 140 gigabytes, but it has already been scanned and indexed. Unless it scans constantly the memory shouldn't be that high I think. 

It's not scanning constantly, and the high memory usage is typical for a .NET application and normal. Here is an explanation I found online:

 

When a .NET application starts, it asks the OS for a chunk of memory which it then segments to become the managed heap, stack, and large object heap. It is this total chunk of memory that TaskManager is reporting, which may or may not be completely used by .NET. Once a .NET application is given a chunk of memory, it will not release it until asked by the OS, which will only happen with the OS determines a need for more memory resources.

 

Simply put: the 200 MB are reserved for Dopamine, but that doesn't mean it is using the full 200 MB at any given time. That's how .NET works, and trying to do something about it is asking for breakage, or causes performance hits.

 

28 minutes ago, Raphaël G. said:

It's not scanning constantly, and the high memory usage is typical for a .NET application and normal. Here is an explanation I found online:

 

When a .NET application starts, it asks the OS for a chunk of memory which it then segments to become the managed heap, stack, and large object heap. It is this total chunk of memory that TaskManager is reporting, which may or may not be completely used by .NET. Once a .NET application is given a chunk of memory, it will not release it until asked by the OS, which will only happen with the OS determines a need for more memory resources.

 

Simply put: the 200 MB are reserved for Dopamine, but that doesn't mean it is using the full 200 MB at any given time. That's how .NET works, and trying to do something about it is asking for breakage, or causes performance hits.

 

oh so its like reserved parking but cars aren't necessarily using the spaces?

9 hours ago, Raphaël G. said:

It's not scanning constantly, and the high memory usage is typical for a .NET application and normal. Here is an explanation I found online:

 

When a .NET application starts, it asks the OS for a chunk of memory which it then segments to become the managed heap, stack, and large object heap. It is this total chunk of memory that TaskManager is reporting, which may or may not be completely used by .NET. Once a .NET application is given a chunk of memory, it will not release it until asked by the OS, which will only happen with the OS determines a need for more memory resources.

 

Simply put: the 200 MB are reserved for Dopamine, but that doesn't mean it is using the full 200 MB at any given time. That's how .NET works, and trying to do something about it is asking for breakage, or causes performance hits.

 

Ah, that explains it. There are times when it hit 300 and I was worried. Question, I am using Windows 10 insider preview. Any chance that Dopamine might not be meshing well with this OS build or it really doesn't matter?

11 hours ago, Raphaël G. said:

Something like that :) 

issue. Not a dopamine issue though. I have a CD I bought by a group Madison Rising  American Hero (Red) the Album and cover art

 

I use Windows Media Player to rip the CD and the WMP properly knows the tracks but no cover art. how can I create an album cover to work with Dopamine? what file format, size etc? I can modify the art myself.

I put a gif file of it at "C:\Users\Christopher\AppData\Roaming\Dopamine\Cache\CoverArt"

 

thanks.

Chrisj1968

10 hours ago, chrisj1968 said:

issue. Not a dopamine issue though. I have a CD I bought by a group Madison Rising  American Hero (Red) the Album and cover art

 

I use Windows Media Player to rip the CD and the WMP properly knows the tracks but no cover art. how can I create an album cover to work with Dopamine? what file format, size etc? I can modify the art myself.

I put a gif file of it at "C:\Users\Christopher\AppData\Roaming\Dopamine\Cache\CoverArt"

 

thanks.

Chrisj1968

Give this a go... http://www.howtogeek.com/57237/how-to-get-complete-album-art-for-your-music-library/

As for ripping CDs, give this a shot, and see if you get better results. http://www.exactaudiocopy.de/

 

EAC is the weapon of choice for pirates, so you can be sure it's very good at what it does. :) 

Any one have more than one monitor and when dopamine starts, the splash screen shows up on another screen but the app shows up on the correct one (the screen where it was closed from)?  Doesn't always happen and trying to get the steps taken to reproduce.  Not that big an issue though, just have seen it a few times.

7 minutes ago, jackslade said:

Any one have more than one monitor and when dopamine starts, the splash screen shows up on another screen but the app shows up on the correct one (the screen where it was closed from)?  Doesn't always happen and trying to get the steps taken to reproduce.  Not that big an issue though, just have seen it a few times.

Try messing about with which monitor is set as the main display, or changing to single display, and switching between the two. Launch and close Dopamine each time, hopefully it will right itself.

1 hour ago, FiB3R said:

Give this a go... http://www.howtogeek.com/57237/how-to-get-complete-album-art-for-your-music-library/

As for ripping CDs, give this a shot, and see if you get better results. http://www.exactaudiocopy.de/

 

EAC is the weapon of choice for pirates, so you can be sure it's very good at what it does. :) 

thank you FiB3R. I'll let you know how it goes.

 

Update: I saved it to the albums cache folder/ Album art and then right clicked the album in dopamine and changed it and pointed to the album cover. right on FiB3R! way to go bud

Edited by chrisj1968
11 hours ago, jackslade said:

Any one have more than one monitor and when dopamine starts, the splash screen shows up on another screen but the app shows up on the correct one (the screen where it was closed from)?  Doesn't always happen and trying to get the steps taken to reproduce.  Not that big an issue though, just have seen it a few times.

Mine does this, but I think I know why.

 

So I have a 3 monitor setup, I have dopamine set to use Nano player and sits in the corner of screen 1 however when i first start it up, the splash screen opens on screen 2.

 

I realised though that if I max the application it does in fact maximise to screen 2 - if move it to screen 1 and close and re-open the splash screen opens on screen 1.

 

Hopefully that makes sense and it helps understand how it behaves for you.

On ‎15‎/‎06‎/‎2016 at 10:14 PM, elmetnuter said:

Hi Raphael :)

I love your software!

I am using SnapX for my work everyday.

 

Downloading Dopamine right now.

 

Thank you!

I'm glad you find it useful! :) I have some new ideas for it. It'll get some updates in the near future.

Enjoy Dopamine :) Version 1.0 final is just around the corner. I'm currently testing the release build.

  • Like 1
On ‎15‎/‎06‎/‎2016 at 9:57 PM, jackslade said:

Any one have more than one monitor and when dopamine starts, the splash screen shows up on another screen but the app shows up on the correct one (the screen where it was closed from)?  Doesn't always happen and trying to get the steps taken to reproduce.  Not that big an issue though, just have seen it a few times.

The splash screen has totally no intelligence :) It just displayed on the screen where the mouse is (I think, I'll have to do more testing). The main window remembers its last position.

I created a bug report for this. Low priority though, for when I'm bored :) 

On ‎15‎/‎06‎/‎2016 at 11:31 PM, Stocks™ said:

Is there possibly any chance of getting a rip function built in to Dopamine? That would be schweet!

Not anytime soon I'm afraid. There are other great tools specially made for that purpose. I won't try to compete with them.

  • Like 1
On 6/17/2016 at 9:45 PM, Raphaël G. said:

Not anytime soon I'm afraid. There are other great tools specially made for that purpose. I won't try to compete with them.

Ahh bummer!

 

Thats cool, I actually have a seperate program already, I'm just lazy and wanted to do it through one application :p

@Raphaël G.

 

Can you share updated list of pending requests or issues? So we can have overview. It will also help people to not repeat the same requests again and again. I hope, it's OK with you.

  • Like 1
1 minute ago, Zlip792 said:

@Raphaël G.

 

Can you share updated list of pending requests or issues? So we can have overview. It will also help people to not repeat the same requests again and again. I hope, it's OK with you.

It would be better if he post it on his website for everyone to see... 

 

Instead of we are flipping the forum pages to find the requests/issues.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • I don't understand the vision. Do people really want to buy a new computer from Dell with 6 browsers installed? We all keep asking for Microsoft to stop having so much junk on their OS, and adding a bunch of browsers seems to go against that. Ideally, we would just be asked what browser we want during OOBE but Google is just going to pay Dell a bunch of money to include Chrome. Additionally, would you want your phones to start including all the browsers too when you get them? The only thing I ever wanted was to be able to uninstall IE or edge and I believe you are now able to. I do agree that microsoft needs to chill with their "are you sure you don't want to try edge before you install chrome" ads when going to download chrome.
    • The funny thing here is that like 70% or so of the web browser users use 'Google Chrome' as web browser. What I don't understand is that why on earth would ANYONE choose 'Google Chrome' on Windows when 'Microsoft Edge' is not just better in most things, but it's already there right out of the box for the Windows users. Microsoft Edge has less data collection (yes, that's a fact), less RAM usage and is more optimized for Windows (as it's a Microsoft product) right out of the box. I'm sure you will come with the argument of bloat in Microsoft Edge. Sure, but most of that can be fixed with a simple tool (there are many good ones out there for this). Yes, that require a couple of clicks in the same way as it requires several clicks to install 'Google Chrome'. And I'm sure you really love the 4 GB of AI-slop data 'Google Chrome' is downloading for Chrome without you agreeing to it. Fun right? Sure, the way Microsoft is pushing 'Microsoft Edge' on users might not be the best way of doing it and might need to change. But I would never choose 'Google Chrome' over 'Microsoft Edge' today anyways. I'm sure there was a period back in the days when 'Google Chrome' actually was better in most things, but that period is not today.
    • JetBrains rolls out IntelliJ IDEA update with Markdown preview fixes and more by David Uzondu Image via JetBrains IntelliJ 2026.1.3 from JetBrains has landed, bringing several highly requested bug fixes that target common UI glitches and terminal rendering issues. If you run tmux inside the integrated terminal, the IDE no longer renders the cursor above the active line. The Markdown preview bug, which was fixed in this release, had annoyed developers for quite some time, as the preview pane failed to render images saved outside the project directory. Instead of displaying the actual image, the IDE simply showed a broken image icon, a problem that stuck around for two years before this update. Over on Windows, developers running WSL can now use wsl.exe to spin up their environments without losing terminal functionality. In previous builds, launching a terminal shell with something like wsl.exe -d ubuntu inside a Windows-based project broke both shell integration and active process detection. Other bug fixes in this release include: An issue where Gradle sync incorrectly reported success as a failure on WSL when using Gradle 9.5.0. A syntax highlighting bug that flagged valid Java for-loop initialization blocks with multiple statements as incorrect. A warning bug that triggered a false non-null local variable alert when using JSpecify annotations. A database generation bug that hid the option to use a DELETE statement instead of a TRUNCATE checkbox. A Kotlin highlighting failure where an assertion error in the Gradle redundant library inspection broke error highlighting. A UI bug where the ComboBox popup lacked a maximum height restriction. A Snowflake syntax error where DataGrip failed to support the "create temp" command. A Svelte syntax parsing failure that incorrectly flagged quotes inside inline expressions. A VCS repository manager deadlock that triggered thread pool exhaustion. A memory leak where the LazyTree component kept all previous versions of a tree in memory. IntelliJ 2026.1.3 is the third bug fix release for the IntelliJ 2026.1 series. The first one landed back in April with a fix for the WSL Python interpreter freeze, another fix for guest participants using Emmet abbreviations, and corrected WildFly server deployment errors.
    • That stupid annoying Sign in with Google on all these sites now... get the fk outta here
  • Recent Achievements

    • Collaborator
      Asgardi earned a badge
      Collaborator
    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      73
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!