Recommended Posts

So a 50% bad/no go systemic fault. Nope, that's not a design flaw at all.

 

(So here's what happened, class. Turn to page 12 of your Fluid Dynamics books. ?)

 

Any open-loop system that will be doing resistive work which also contains a sublimate (<89% liquid-state) or stable (>90% liquid-state) fluid under pressure must be designed to account for any expelling shock that is exerted in that system if rapid decompression of that high-pressure fluid is anticipated to occur. If not, safeguards should either be a first order priority to eliminate unintended expelling shocks OR that system should immediately be converted to a closed loop to prevent leakage or explosive decompression that could result in destruction of equipment, facilities, and/or personnel.

 

In layman's terms: Boeing's Engineers (or the Suppliers) forgot that they were dealing with sublimate superfluids under extreme pressures. Their new RCS valves could NOT resist the pressures in the lines holding the hydrazine fuel, so those valves leaked that crap all over the place. Soon as they primed 'em it was all over. 50% systemic failure rate. The valves were moved out of their "install position" and into the "in-use/closed" position, but they couldn't cope with the pressure completely. The "surge pressure" (aka the expelling shock force) did it's deed. Sputtering like an overfilled coffee maker.

 

Everyone knows what the expelling shock force with fluids is. Ever used a garden hose with one of the "gun-style" attachments on the end, then sprayed the water? The sensation of the hose moving backwards is expelling shock force. "Surge pressure". That same force also makes the length of the hose appear to "jump".

 

Now do it at a Car Wash with one of THOSE hoses. Strong, isn't it? Those hoses jump way more. That's another example of expelling shock force.

 

NOW imagine internal valves trying to hold back a few hundred (or more) PSI. That's gonna be one hell of a jolt. RCS Valves need to be able to close the same way EVERY TIME to hold that back or things go very, very badly. Those fuel lines need to be able to take that PLUS the expelling shock force (and remember that sublimates can reliquify as they are expelled too, increasing their volume inside a space) ... you get the idea now.

 

Problem I have with it is that this is a basic thing with Fluid Dynamics. Those Engineers simply designed a [crappy] RCS Valve. Did they seriously forget basic Fluid Dynamics, or do they not CARE?!

 

Nope. I'm calling B.S. on that RIGHT now. There's NO way that simply changing the start position on those valves is going to solve this problem.

 

No forking WAY NASA should allow this to simply pass.

  • Like 2

Leaked (?) ISS schedule shows both Crew Dragon and Starliner.

 

Uncrewed: December 2018
Crewed: May-June 2019

 

Thus preserving the illusion of a horse race.

 

Crews

 

Crew Dragon Operational Mission 1: Sunita Williams, Eric Boe

 

Starliner Crew Flight Test: Doug Hurley, Behnken, and Boeing test pilot Christopher Ferguson 

 

Note the first Crew Dragon with a crew is labeled OM-1 (Operational Mission 1) and not DM-2 (Demo Mission 2) (!!), while Starliner's mission is still CFT (Crewed Flight Test.) This sort-of indicates Crew Dragon will be certified first.

 

Turning a crewed test flight into an operational mission had been discussed several months ago, but it was to be Starliner and not Crew Dragon.

 

 

 

Edited by DocM
  • Thanks 1

Better dates from NASA

 

https://blogs.nasa.gov/commercialcrew/2018/08/02/nasas-commercial-crew-program-target-test-flight-dates-3/

 

Targeted Test Flight Dates

 

Boeing OFT (uncrewed): late 2018/early 2019
Boeing CFT (crewed): mid-2019

 

SpaceX DM-1 (uncrewed): November 2018
SpaceX DM-2 (crewed): April 2019

 

Barring anything unforseen, it looks like SpaceX gets the US flag and Shuttle model trophies left by the last Shuttle crew for its first successor.

 

763486116_CommercialCrew1stflag-800.thumb.jpg.71f3dfd8fb260f65dcfcbfbada2554e8.jpg

  • Like 1
  • Thanks 1

Whoa....

 

While the dates above are posted at the top of the page, all Boeing Starliner mission info has been removed from NASA's 'Launches and Landings' list.

 

Nothing there but SpaceX Crew Dragon DM-1 & DM-2, ISS Expeditions and science launches.

 

https://www.nasa.gov/launchschedule/

  • Sad 1

Ruh-roh ... 

 

'whelp. I wouldn't be surprised if Starliner got canned and they're going all in with Orion JUST to give it an actual mission set.

 

Between the RCS Valves/plumbing problem, the Atlas V "black zones" issue (that still isn't sorted), the Abort Engines thing that'd likely detonate the upper stage of the Atlas upon use (and crush the capsule from below), and the lack of info from the Russians on the RD-180 data to get it human-rated ...

 

... Starliner's a "no-go".

 

Betcha. :no: 

PCM = Post Certification Mission

 

Crew Dragon DM-2: Doug Hurley and Bob Behnken

 

Crew Dragon PCM-1: Victor Glover and Mike Hopkins

 

Starliner CFT: Eric Boe, Nicole Aunapu Mann, Chris Ferguson (Boeing test pilot)

 

Starliner PCM-1: Josh Cassada and Sunita "Suni"  Williams

 

1533312012876.jpg?ve=1&tl=1&text=big-top

 

 

 

Edited by DocM

From the AMA

 

Quote

 

hristinaremter  USA:  is there a bathroom on the new commercial flights? dragon and starliner crew


NASA: For Dragon, yes. -Bob

 

 

Quote

 

rhoracio: big congratulations to you all!  Q: would you please explain does SpaceX'es helmet visor open?


NASA: The visor does open. We normally have it open on our way to the pad, but closed for launch and for entry. -Bob

 

NASA: Yes. There's two push buttons about where your chin is. They allow it to pop open whenever you need it to. - Doug

 


1361793097_SpaceX_visor(1).thumb.jpg.a392d75646f2b6ff471a3c72e2657a27.jpg

 

1ED24D5E-F1CA-448F-A9B9-D3ADD5D78515.thumb.jpeg.a68872b6e265856316bc359f57fab605.jpeg

 

post-10859-0-69828800-1533341300.jpeg

 

Edited by DocM
  • Like 2
  • 2 weeks later...

Simulator, and a closeup. In the low center there's a T handle for manual SuperDraco aborts - pull & twist. On an arm rest is a keypad.

 

The suit's umbilical connects to a port on the right thigh. No tangle of plumbing.

 

control1.thumb.jpg.55d00d03830be8c75a06f6074f379735.jpg

 

Crew_Dragon_control.thumb.jpg.648298a79a2339fc6558922ee1a4e66f.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
    • I did test it a month or so back, but ... the results I expect to be on the first page are not there.
    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!