Recommended Posts

https://www.nasa.gov/feature/nasa-spacex-agree-on-plans-for-crew-launch-day-operations

Quote

NASA, SpaceX Agree on Plans for Crew Launch Day Operations

 

NASA's Commercial Crew Program and SpaceX are finalizing plans for launch day operations as they prepare for the company's first flight test with astronauts on board. The teams are working toward a crew test flight to the International Space Station, known as Demo-2, with NASA astronauts Bob Behnken and Doug Hurley in April 2019.  

A key question the program and the company have been assessing is whether the astronauts will climb aboard the Crew Dragon spacecraft before or after SpaceX fuels the Falcon 9 rocket. NASA has made the decision to move forward with SpaceX's plan to fuel the rocket after the astronauts are in place. While the agreement makes this plan the baseline for operations, it is contingent upon NASA's final certification of the operation.

"To make this decision, our teams conducted an extensive review of the SpaceX ground operations, launch vehicle design, escape systems and operational history," said Kathy Lueders, manager of NASA's Commercial Crew Program. "Safety for our personnel was the driver for this analysis, and the team’s assessment was that this plan presents the least risk."

Additional verification and demonstration activities, which include five crew loading demonstrations of the Falcon 9 Block 5, will be critical to final certification of this plan. These loading demonstrations will verify the flight crew configuration and crew loading timeline prior to Demo-2. After these conditions have been met, NASA will assess any remaining risk before determining that the system is certified to fly with crew.

If all goes according to plan, on launch day, the Falcon 9 composite overwrap pressure vessels, known as COPVs, will be loaded with helium and verified to be in a stable configuration prior to astronaut arrival at the launch pad. The astronauts then will board the spacecraft about two hours before launch, when the launch system is in a quiescent state. After the ground crews depart the launch pad, the launch escape systems will be activated approximately 38 minutes before liftoff, just before fueling begins. SpaceX launch controllers then will begin loading rocket grade kerosene and densified liquid oxygen approximately 35 minutes before launch. The countdown and launch preparations can be stopped automatically up to the last moment before launch. In the unlikely event of an emergency at any point up to and after launch, the launch escape systems will allow the astronauts to evacuate safely.

This timeline is consistent with the fueling procedures SpaceX uses for its commercial resupply missions and satellite launches.

The crew launches of NASA’s Commercial Crew partners SpaceX and Boeing will return the nation’s ability to launch our astronauts from the United States to and from the International Space Station on American spacecraft.

 

This seems like the best way to do it to me, in my head, loading the propellant before you get on the rocket seems more dangerous cause your not strapped into a safety mechanism, what happens if there is an issue as you are walking up to the thing.

 

I guess there is a lot of other things to consider, mostly that more issues happen during loading. But every time i just think its safer to be in the capsule with an escape system than not.

Starliner control console. 

 

No touch screens, you use physical buttons to navigate through menus and flip pages. Not unlike some old MSDOS programs. Some features borrowed from Orion. 

 

Still, Boeing stresses it's intended to be an automated taxi.

 

DlEsLaBW0AAu780.jpg

 

 

Edited by DocM

Observe the land of double standards ... sheesh. This is what that Professor (now colleague) of mine was talking about before regarding all of the arbitrary crap being pulled on SpaceX. 2, even 3 times the amount of testing and redundancy relative to everyone else's gear simply to harass and delay them. :no: 

 

Look at 'em. Just look at 'em.

Overpressure from launches causing damage to the tower being the primary reason why. :yes: There are internal upgrades that are going to be going into it once the cladding is installed that have to be protected, and possibly the Crew Access Area is gonna need to be climate controlled too.

 

Then the matter of whether the site will be used to launch BFR or not ... still undecided. South Texas is still a better fit due to logistics. Depends on a bunch of factors, chief among them what the FAA says concerning the planned launch corridor at this point but if the point-to-point BFS flights work out well then it'll alleviate a lot of concerns.

Can't get everywhere shooting the gap between the Keys and Cuba, or going South of Cuba, to avoid overflight issues. The best trajectories look to be GEO, Lunar and interplanetary.

 

For P2P Florida may be better; launch polar-ish then a dogleg to Asia, Oz and NZ. Straight shots to Europe and the ME (KSA is interested, likely UAE as well.)

 

Deployed

 

Edited by DocM
  • Like 1

I completely agree. What I'd like to see are flights out of the Cape, Vandy and South Texas. Use Vandy for polar tracks, ST and KSC for the rest of the flight tracks.

 

Personally I think KSC is the standard option for anything "up and out" (GTO+, TLI, etc), but ST is a better option (or could be made such) from a logistical standpoint. It's much, much closer to SpaceX's facilities than KSC, they don't have to go through a big hassle to get it to the launch site, and the Gulf is a huge body of water in it's own right. The dogleg maneuver isn't that big of a deal in the grand scheme of things and BFR/BFS has tons of spare dV to spend on the inclination change as it shoots the gap between Florida and Cuba.

 

Even if it looks like the dV can't be spared for a mission there's always the potential to launch from KSC and it'll eliminate that issue entirely. :yes: 

 

Speaking of KSC, looks like the tower got a cleaning and a new coat of primer .... :D 

55 minutes ago, Unobscured Vision said:

>

Speaking of KSC, looks like the tower got a cleaning and a new coat of primer .... :D 

 

I'd expect an overcoat before mounting the external panels. Curious as to B&W, metallic or ??

  • Like 1

Likely it'll be a protectant to deal with the salt content (as well as the humidity) in the air. That stuff is rough on metals.

 

End result will likely be a grey-white appearance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is weird. Mythos is more unrestricted compared to Fable. Technically it poses more risk!!
    • This is a great thing, I always have issues with Verizon while inside of certain football stadiums due to the saturation and walls blocking signal so a LOS way to connect would be great. Verizon was supposed to be offering sat data this year but I've not heard a word of it lately. Dude is sending rockets into space in a cheap manner, low waste foot print and has a great product with solar/battery tech. We would be so far behind China right now if not for him and a push to get back into space.
    • illegally? Proof of that? Seems you are posting misinformation or well a pure straight up lie cause there is zero proof of such a thing. But I get it...
    • KillerPDF 1.6.0 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~15 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.6.0 changelog: A big release: major new features, a full visual refresh, and an internal rewrite. New Tabbed documents - open several PDFs at once, each restoring its page, zoom, and view OCR built into the exe (Tesseract) - OCR a page or dragged region to the clipboard, make a scan searchable, or extract all text; extra languages download on demand Digital signatures with a cloud certificate (Certum SimplySign), reusable signatures, and click-to-sign form fields Transform tool - rotate, scale, flip, and straighten a crooked scan, with live preview Edit existing text by double-clicking a line (the original is cleanly covered) Line tool, refreshed draw/highlight bars, resizable word-wrapping text boxes, and a full RGB color picker with eyedropper Print options (scale, position, margins, two-sided), page-number stamping, folder/.zip import, Document Info (F12), and recent files with file-type icons Translations: Bengali, Turkish, Simplified Chinese, German, French. Changed New logo, icons, fonts, and colors throughout Six themes with per-theme accent colors; sidebar docks left or right; toolbar style picker Internal rewrite: the ~15,000-line main window split into ~40 focused files (no behavior change) Fixed True 300 DPI printing, encrypted/damaged PDFs open on a background thread with a repair fallback, form fields render in every view mode, and undo is one item per press Download: KillerPDF 1.6.0 | 14.6 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      221
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!