Recommended Posts

Corrected: Dragon was mated with its Trunk this weekend. The booster is being prepped at McGregor.

 

Twitter....

 

Quote

@USLaunchReport
SpaceX confirms mating CRS-10 Dragon to Falcon 9 booster Trunk, Cape Canaveral for late January launch

 

Trunk payloads

 

SAGE III: Stratospheric Aerosol and Gas Experiment hosted at ExPRESS Logistic Carrier-1 (ELC-1)

 

SAGE-NVP: hosted at ELC-4

 

STP-H5: STP-Houston 5 (ISS SpaceCube Experiment Mini)

  • Like 1
Link to comment
https://www.neowin.net/forum/topic/1316818-falcon-9-dragon-crs-10-iss-resupply/
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

NASA Opens Media Accreditation for Next SpaceX Space Station Cargo Launch

 

Quote

Media accreditation now is open for launch of the next SpaceX commercial cargo resupply services mission to the International Space Station, currently targeted for no earlier than February.

 

The uncrewed Dragon cargo spacecraft will launch on a Falcon 9 rocket from Launch Complex 39A at NASA’s Kennedy Space Center in Florida. The exact launch date and time still are under review.

 

Media prelaunch and launch activities will take place at Kennedy. Credentialing deadlines are as follows:

 

International media without U.S. citizenship must apply by 4:30 p.m. EST Sunday, Jan. 22.
U.S. media must apply by 4:30 p.m. Sunday, Jan. 29.


All media accreditation requests should be submitted online at:

https://media.ksc.nasa.gov

 

International media are required to upload a scanned copy of their media visa and passport or green card with their accreditation requests. Media must present two forms of unexpired, government identification to enter Kennedy. One form must include a photo, such as a passport or driver’s license.

 

Questions about accreditation may be addressed to Jennifer Horner at [email protected] or 321-867-6598. For other questions, or additional information, contact Kennedy’s newsroom at 321-867-2468.

 

This is the tenth mission by SpaceX under NASA’s Commercial Resupply Services contract. In addition to supplies and equipment, Dragon will deliver several science investigations to the space station, including:

 

an experiment that will use the microgravity environment to grow stem cells that are of sufficient quality and quantity to use in the treatment of patients with stroke;


a Merck Research Labs investigation that tests growth in microgravity of antibodies important for fighting a wide range of human diseases, including cancer; and


two Earth science payloads, NASA’s Stratospheric Aerosol Gas Experiment III mission and Lightning Imaging Sensor, which will provide continuity for key climate observations and data records.


The International Space Station is a convergence of science, technology and human innovation that demonstrates new technologies and makes research breakthroughs not possible on Earth. The space station has been occupied continuously since November 2000. In that time, more than 200 people and a variety of international and commercial spacecraft have visited the orbiting laboratory. The space station remains the springboard to NASA's next great leap in exploration, including future missions to an asteroid and Mars.

https://www.nasa.gov/press-release/nasa-opens-media-accreditation-for-next-spacex-space-station-cargo-launch

 

  • Like 1

 

This was from a science briefing today, but I would not be surprised to see a corresponding delay due to EchoStar23 and pad readiness checks.

 

Pad needs to be the priority now, the rest will fall in place soon enough!

 

:D

  • Like 1

Yep. Once the pad is ready, they'll catch up with their schedule easily enough. Expect NET's to move left once it's back up. After 39-A is done, they can concentrate on getting LC-40 going again, then it's back to 39-A for the rest of the work to get ready for the Crewed Program. :yes: Lots to be done still.

 

[EDIT] OH, and they have two more landing pads to build at LZ-1, with supporting hardware. They're gonna be busy all year long.

  • Like 1
33 minutes ago, Unobscured Vision said:

Hmm ... might be some "gremlins" afoot.

There should be a few, but I am not worried and would prefer proper test prior to a nationally televised event. SpaceX could use only good press right now.

 

Two weeks is nothing, then once launched, all the rest in rapid fire.

 

I am optimistic...:woot:

OK, NASA did pull rank and the date for CRS-10 is after February 3 but not yet set. Perhaps February 15-ish. 

 

They pulled rank to assure CRS-10 launches in February, in part to make up for the lost Progress and to prevent a schedule collision with CRS-11 in March.

 

Looking like an RTLS landing.

 


Updated Guidance on SpaceXs First Launch from Pad 39A

HAWTHORNE, Calif.  Jan. 29, 2017. SpaceX announced today that its first launch from Launch Complex 39A (LC-39A) at NASAs Kennedy Space Center in Florida will be the CRS-10 mission to the International Space Station. The launch is currently targeted for no earlier than mid-February.  Following the launch of CRS-10, first commercial mission from 39A is currently slated to be EchoStar XXIII. This schedule change allows time for additional testing of ground systems ahead of the CRS-10 mission. The launch vehicles, Dragon, and the EchoStar satellite are all healthy and prepared for launch.

U.S. media interested in covering the CRS-10 mission must apply to NASA by 4:30 p.m. EST, today, Sunday, Jan. 29 to request accreditation.

SpaceX has extended media accreditation for U.S. media wishing to cover the EchoStar XXIII mission. U.S. media who have not yet submitted requests using the form below or linked to here may now make requests to for accreditation up until 5:00 p.m. EST, Friday, Feb. 10.  As indicated below, requesting accreditation is not required of media who hold current annual press credentials issued by Kennedy Space Center, but it is appreciated for planning purposes.

More details on these missions and various pre-launch activities will be made available at a later date.

Certainly moved right, but we don't know how far. This shuffled  things pretty well.

 

At least Fridays Transporter Erector test went well, testing it's Throwback design. Instead of slowly retracting a few degrees at T-3:00 this TE will drop rapidly, and further, at T-0.  Quite a trick for something do damn large at a distance it's mistaken for a Falcon 9 on the pad.

February 03, 2017 

 

MEDIA ADVISORY M17-017

 

NASA Highlights Science Launching on Next SpaceX Cargo Mission

NASA will host a media teleconference at 3 p.m. EST Wednesday, Feb. 8, to discuss research investigations launching aboard the next SpaceX commercial resupply flight to the International Space Station. Among the investigations are experiments with potential to fight human disease and a new autonomous spacecraft docking technology for testing.

 

The SpaceX Dragon spacecraft is targeted to launch no earlier than mid-February, on a Falcon 9 rocket from Launch Complex 39A at NASA’s Kennedy Space Center in Florida. This will be the first mission from the historic launch pad since SpaceX began to modernize the pad’s structures in preparation to fly astronauts on NASA missions for the agency’s Commercial Crew Program.

 

To participate in the science preview teleconference, reporters must contact Tabatha Thompson at 202-358-1100 or [email protected] by 1 p.m. Wednesday for dial-in information. 

 

The briefing participants will include:

 

    Danielle Gibson and Will Castro, students at Craft Academy at Morehead State University, to explain their experiment to use and evaluate smooth muscle cells to test theories about muscle contraction in the absence of gravity;  


    Paul Reichart, associate principal scientist at Merck Research Laboratories, who will discuss a Merck investigation that tests growth in microgravity of antibodies important for fighting a wide range of human diseases;


    Michael Freilich, director of NASA’s Earth Science Division, to brief two Earth science payloads: NASA’s Stratospheric Aerosol Gas Experiment III mission and Lightning Imaging Sensor, which will provide continuity for key climate observations and data records;


    Ben Reed, deputy division director of the Satellite Servicing Projects Division at NASA’s Goddard Space Flight Center, to discuss Raven, a technology demonstration to test autonomous rendezvous capability on the International Space Station; and


    Dr. Anita Goel, chairman and scientific director for Nanobiosym, to discuss an experiment to provide data valuable for antibiotic drug development. 

 

The uncrewed Dragon cargo spacecraft will carry crew supplies, scientific research and hardware to the orbital laboratory to support the Expedition 50 and 51 crew members. This launch is the tenth contracted mission by SpaceX under NASA’s Commercial Resupply Services contract.

 

Audio of the teleconference will stream live online at: 

 

http://www.nasa.gov/live

 

For launch countdown coverage, NASA's launch blog, and more information about the mission, visit:

 

http://www.nasa.gov/spacex

  • Like 2

That's the base for both F9 and FH.  It has removable panels for the side boosters (which also house the 2 side hold-downs), and hold-downs can be added or subtracted as needed. FH would have 2 wider spaced side hold-downs and 6 front/back hold-downs (3 each.)

 

Quite a project building that part.

Edited by DocM
  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • A coalition of publishers sued OpenAI and Microsoft over scraping content without consent by Hamid Ganji Image via Depositphotos.com AI companies often rely on readily available internet content to train their chatbots and provide users with instant answers. This method of AI training is fast and relatively inexpensive, but using a website’s content without permission or compensation is not something publishers like to see, and this is exactly why Microsoft and OpenAI are now being sued. As reported by Bloomberg, a group of publishers that collectively own nearly 400 newspapers has filed a lawsuit against OpenAI and Microsoft. The coalition argues that the two companies scraped their content to build AI chatbots like ChatGPT and Copilot without paying any compensation. The complaint, filed in the U.S. District Court for the Southern District of New York, argues that while AI products have generated billions of dollars in market value using publishers’ work, none of that value has been shared with the publishers. The plaintiffs are seeking statutory damages and injunctive relief for alleged copyright infringement and violations of the Digital Millennium Copyright Act. “Defendants systematically and secretly crawled the Publishers’ websites—including content behind paywalls and other access restrictions—and copied the Publishers’ articles, stories, and other original works onto their own servers without authorization,” the complaint states. The publishers also described the AI boom as a “death knell for local journalism” if AI companies that scrape content for free are not held accountable. Former New Jersey Attorney General Matthew Platkin and his law firm, Platkin LLP, are representing the publishers. “Our models empower innovation, are trained on publicly available data, and are grounded in fair use,” OpenAI spokesperson Drew Pusateri told Bloomberg. This is not the first lawsuit involving the unauthorized use of publishers’ content by AI firms, but it is one of the largest coalitions ever formed against the free use of content by AI chatbots. In 2024, OpenAI and Microsoft also faced a similar lawsuit from eight newspapers that claimed AI products were benefiting from their content without permission.
    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!