Recommended Posts

Same lineup.

Batting lineup:

  • Abel
  • Baker
  • Charles
  • Daniel
  • Edward
  • Frank
  • George
  • Hooker
  • Irwin

Abel walks. Baker walks. Charles forces Baker. Edward bats in Daniel's turn. While Edward is at bat, Abel scores and Charles goes to second on a wild pitch. Edward grounds out, sending Charles to third. What is the ruling if the defensive team appeals (a) immediately or (b) after a pitch to Daniel?

If a batter goes up to the plate and nothing is said till after the at bat, it as if he went in order and there are no penalties.

If something is said when he steps into the batters box, the batter who was skipped is out.

(a) Abel's run counts and Charles is entitled to second base since these advances were not made because of the improper batter batting a ball or advancing to first base. Charles must return to second base because his advance to third resulted from the improper batter batting a ball. Daniel is called out, and Edward is the proper batter;

(b) Abel's run counts and Charles stays on third. The proper batter is Frank.

Two outs, bases loaded, 3-2 count. With all runners going on the pitch, the batter takes ball four. R2 touches and rounds 3rd and is picked off by the catcher before the runner from 3rd touches the plate. Does the run score?

A relief pitcher enters the game with 2 outs and a runner at first. Without delivering a single pitch, the new pitcher successfully picks off R1, thus retiring the side. The manager now inserts a pinch-hitter for the reliever, who is due to lead off the next half-inning. Is this legal?

Edited by Remote
What Happened to tucker on the play?

Did he get a hit? what kind of a hit?

Did he get an RBI?

Tucker is out for passing the preceding runner. If the fielder didin't catch his drive, then it's a hit. You didn't mention if the runner on third went home, but if he did before Tucker passed the other runner, it's an RBI (this is not a force play).

Tucker is out for passing the preceding runner. If the fielder didin't catch his drive, then it's a hit. You didn't mention if the runner on third went home, but if he did before Tucker passed the other runner, it's an RBI (this is not a force play).

Thats correct, I changed it though, so if you dont see the question people, know that its because I deleted it and replaced with better ones

Two outs, bases loaded, 3-2 count. With all runners going on the pitch, the batter takes ball four. R2 touches and rounds 3rd and is picked off by the catcher before the runner from 3rd touches the plate. Does the run score?

Yes., the run is forced home. You might tell me why the catcher was near third, though. :p

A relief pitcher enters the game with 2 outs and a runner at first. Without delivering a single pitch, the new pitcher successfully picks off R1, thus retiring the side. The manager now inserts a pinch-hitter for the reliever, who is due to lead off the next half-inning. Is this legal?

I'm going to say it's legal. It's no different than switching batters after a pitcher change, IMO.

I know you're going to get me on this, because it rings a bell. Oh well. LD

The Batter doubles but misses first base. "Time" is called. After the ball is put back into play, the pitcher balks when he attempts to make an appeal at 1st base. What is the call?

You can't balk during an appeal, you must advise the ump you are appealing and the pitcher would not have to be on the rubber to throw the ball to first anyway.

Since it was an illegal bat, the run does not score, and charles goes back to his original base.

If they fail to appeal everyone stays where they are at, run scored, and it's Edward's bat.

/edit dang! That's what I get for leaving for a few, and coming back and replying....

You can't balk during an appeal, you must advise the ump you are appealing and the pitcher would not have to be on the rubber to throw the ball to first anyway.

That is incorrect. When you appeal the ball is live. A balk will result in a null of the appeal and the runner is awareded a base.

Yes., the run is forced home. You might tell me why the catcher was near third, though. :p

I'm going to say it's legal. It's no different than switching batters after a pitcher change, IMO.

I know you're going to get me on this, because it rings a bell. Oh well. LD

Correct.

Correct.

the infield fly rule is: if runners are on 1st and 2nd or on the corners or the bases are loaded with elss than 2 out, and the batter pops up on the infield, and the umpire deems the ball catchable by an infielder, the batter shall be out and the ball dead. this is to avoid the fielder purposefully dropping the ball to cause a double or triple play.

OHHH! Wow, I used to play softball in middle school and summer before I started high school and the in-field fly rule applied to us and I could never understand why, haha. I was a sucker for hitting pop-ups. Thanks! (Y)

Runner on 2nd base with two outs. Batter hits one over the fence. As R2 rounds third he trips on the base and falls down. The third base coach helps him up and he continues home. What's the call?

That is legal....the play is dead if the ball is hit over the fence, but if the play is live the runner is called out. Any contact between coach and runner results in an out.

As for the whole tie goes to the runner thing....that is not true. Even on very close plays at first, if the umpire is in the right position, you can easily tell whether the runner is safe or out.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!