Recommended Posts

It. Is. Happening....

 

Brownsville Herald...

 


>
SpaceX spokesman James Gleeson said in an email that the Starship prototype was moved to the launch pad in preparation for testing, though the public won't be able to see the first tests. 

"SpaceX will conduct checkouts of the newly installed ground systems and perform a short static fire test in the days ahead," he said. 

"Although the prototype is designed to perform sub-orbital flights, or hops, powered by the SpaceX Raptor engine, the vehicle will be tethered during initial testing and hops will not be visible from offsite. SpaceX will establish a safety zone perimeter in coordination with local enforcement and signage will be in place to alert the community prior to the testing."
>

  • Like 2

Aerial view of the Starship Prototype test launch site, which still needs a few items for high altitude tests. The square pad has heavily reinforced hard points for the legs.

 

 

Another angle showing the full launch site, looking towards the Gulf of Mexico.

 

1591311837_IMG_20190309_145554-2048(1).thumb.jpg.28244ae984db16226126bc0b9a6031a1.jpg

 

Same source, overview of the build site.

 

In front of the Sprung structure is the original build jig. Between it and the Sprung is the first new cylinder. 

 

To the right background, surrounded by shipping containers,  is a second build site with another cylinder.

 

The Starship Hopper at center is now at the pad, moved there by a transporter rig similar to those used for moving large items and houses

 

IMG_20190309_143558-2048.thumb.jpg.9bbf24e90b7f7df193ab6117e11e12ce.jpg

 

Edited by DocM
  • Like 1
On 3/8/2019 at 7:11 PM, DocM said:

Now we know why the Starship Hopper was moved today!

 

 

 

Are they still working on the nose cone?  I could see them sending this up without.  In my non-engineer opinion, I'm not sure it does a whole lot for them other than it makes it look more like a rocket.

  • Like 1

There are two build sites at Boca Chica, and they're working on new cylinders at each. The steel is much shinier, thicker and they're being seam welded by machine.

 

One may well be a nose cone, but it wouldn't surprise me if Starship Mk 1 is also being built - or soon will be. 

  • Like 2

Raptor SN2 installed today, tests very soon. 

 

KRGV News...

 

Quote


SpaceX Confirms Test Launch of Rocket Prototype Days Away

EAR BROWNSVILLE SpaceX officials confirm that a test launch of the rocket prototype at the Boca Chica Beach site is just days away.

SpaceX spokesman James Gleeson confirmed in a statement:

SpaceX will conduct checkouts of the newly installed ground systems and perform a short static fire test in the days ahead. Although the prototype is designed to perform sub-orbital flights, or hops, powered by the SpaceX Raptor engine, the vehicle will be tethered during initial testing and hops will not be visible from offsite."

Terry Heaton, a Boca Chica Beach Village resident, says with the test launch approaching he is worried about access to the area during testing. 

Heaton says he hasn't received any word from county officials or SpaceX about any plans for them to leave their home, road closures or access to the area. 
>

Yes, he has, and per the EIS village residents will be allowed in and out. Beach access is restricted.

:woot:

Austin Barnard🚀 @austinbarnard45
Do y'all think #SpaceX will attempt some sort of test, With only one raptor or wait for the other two to arrive. It's honestly been boggling my mind.
|
Elon Musk ✔ @elonmusk
First (really short) hops with one engine. Suborbital flights with three.
|
Hopefully. Always many issues integrating engine & stage. First hops will lift off, but only barely.
|
Raptor is *very* complex, even for a staged combustion engine. Were simplifying as much as possible with each iteration. Throttling down to ~50% is hard, but manageable. Going to 25% would be extremely tough, but hopefully not needed.
|
Working on regulatory approval for both Boca Chica, Texas, and Cape Kennedy, Florida. Will also be building Starship & Super Heavy simultaneously in both locations.
|

 

So the two new build sites in Texas are Starship Mk 1,and they'll be flying from the Eastern Range!!

Edited by DocM
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Yes, I actually glossed over the Linux part from the OP. You could always go for a 9070 XT and if you really want to play Ray Traced games in the future, GeForce Now is pretty damn good on Linux https://www.neowin.net/news/nvidias-native-geforce-now-app-for-linux-bridges-the-gaming-gap-hands-on/
    • One reason it might be running hotter is dust build up within the cooling or perhaps the paste has dried out. You could always try repasting your old GPU and cleaning the cooler. Your experience in Linux will be much better with an AMD GPU; the performance in gaming is much closer to Windows than nVidia would be. I personally think on Windows, AMD drivers are junk.
    • I reviewed it back in March, but I didn't have a 5070 at the time https://www.neowin.net/reviews/amd-rx-9070-review-vs-rtx-5070-4070-and-rx-9070-xt-7800-xt--just-good-enough/ When I reviewed the 9070 I did have a 5070 to compare it against, so the scores are there for the 9070 XT. it outperforms the 5070 in raster, and is barely neck and neck in Ray Tracing. So it's better than a 5070 in everything but Ray Tracing where it is neck and neck, or just under. To be honest, the uplift from 3080 when it was new to the 9070 XT is not as great a step up. If you can find a used 4080 Super for around the same money, you would probably be better off, but if you only want to buy new then the 16GB 9070 XT is the best value for money in its category.
    • I really hope the author's health is ok. Squirreling away a official backup of this software. Looks like the internet archive already cached a copy as well - https://web.archive.org/web/20...ldbit-soft.fi/software.html
    • AMD is supported out of the box in linux because of their open source driver. Nvidia does not. All my systems are amd and all of them work nicely on linux arch without doing anything.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      252
    3. 3
      Steven P.
      71
    4. 4
      +Edouard
      69
    5. 5
      Skyfrog
      67
  • Tell a friend

    Love Neowin? Tell a friend!