SpaceX Super Heavy and Starship updates

By DocM
in Science News & Discussion

 Share

Recommended Posts

Grand Master

DocM

Posted
  • Author
Posted

It. Is. Happening....

 

Brownsville Herald...

 


>
SpaceX spokesman James Gleeson said in an email that the Starship prototype was moved to the launch pad in preparation for testing, though the public won't be able to see the first tests. 

"SpaceX will conduct checkouts of the newly installed ground systems and perform a short static fire test in the days ahead," he said. 

"Although the prototype is designed to perform sub-orbital flights, or hops, powered by the SpaceX Raptor engine, the vehicle will be tethered during initial testing and hops will not be visible from offsite. SpaceX will establish a safety zone perimeter in coordination with local enforcement and signage will be in place to alert the community prior to the testing."
>

  • Blue-Vision and Nogib
  • Like 2
Grand Master

DocM

Posted
  • Author
Posted (edited)

Aerial view of the Starship Prototype test launch site, which still needs a few items for high altitude tests. The square pad has heavily reinforced hard points for the legs.

 

 

Another angle showing the full launch site, looking towards the Gulf of Mexico.

 

1591311837_IMG_20190309_145554-2048(1).thumb.jpg.28244ae984db16226126bc0b9a6031a1.jpg

 

Same source, overview of the build site.

 

In front of the Sprung structure is the original build jig. Between it and the Sprung is the first new cylinder. 

 

To the right background, surrounded by shipping containers,  is a second build site with another cylinder.

 

The Starship Hopper at center is now at the pad, moved there by a transporter rig similar to those used for moving large items and houses

 

IMG_20190309_143558-2048.thumb.jpg.9bbf24e90b7f7df193ab6117e11e12ce.jpg

 

Edited by DocM
  • Blue-Vision
  • Like 1
Grand Master

TrevorLahey

Posted
Posted
On 3/8/2019 at 7:11 PM, DocM said:

Now we know why the Starship Hopper was moved today!

 

 

 

Are they still working on the nose cone?  I could see them sending this up without.  In my non-engineer opinion, I'm not sure it does a whole lot for them other than it makes it look more like a rocket.

  • Blue-Vision
  • Like 1
Grand Master

DocM

Posted
  • Author
Posted

There are two build sites at Boca Chica, and they're working on new cylinders at each. The steel is much shinier, thicker and they're being seam welded by machine.

 

One may well be a nose cone, but it wouldn't surprise me if Starship Mk 1 is also being built - or soon will be. 

  • Blue-Vision and TrevorLahey
  • Like 2
Grand Master

DocM

Posted
  • Author
Posted (edited)

Raptor SN2 installed today, tests very soon. 

 

KRGV News...

 

Quote


SpaceX Confirms Test Launch of Rocket Prototype Days Away

EAR BROWNSVILLE SpaceX officials confirm that a test launch of the rocket prototype at the Boca Chica Beach site is just days away.

SpaceX spokesman James Gleeson confirmed in a statement:

SpaceX will conduct checkouts of the newly installed ground systems and perform a short static fire test in the days ahead. Although the prototype is designed to perform sub-orbital flights, or hops, powered by the SpaceX Raptor engine, the vehicle will be tethered during initial testing and hops will not be visible from offsite."

Terry Heaton, a Boca Chica Beach Village resident, says with the test launch approaching he is worried about access to the area during testing. 

Heaton says he hasn't received any word from county officials or SpaceX about any plans for them to leave their home, road closures or access to the area. 
>

Yes, he has, and per the EIS village residents will be allowed in and out. Beach access is restricted.

Grand Master

DocM

Posted
  • Author
Posted (edited)

:woot:

Austin Barnard🚀 @austinbarnard45
Do y'all think #SpaceX will attempt some sort of test, With only one raptor or wait for the other two to arrive. It's honestly been boggling my mind.
|
Elon Musk ✔ @elonmusk
First (really short) hops with one engine. Suborbital flights with three.
|
Hopefully. Always many issues integrating engine & stage. First hops will lift off, but only barely.
|
Raptor is *very* complex, even for a staged combustion engine. Were simplifying as much as possible with each iteration. Throttling down to ~50% is hard, but manageable. Going to 25% would be extremely tough, but hopefully not needed.
|
Working on regulatory approval for both Boca Chica, Texas, and Cape Kennedy, Florida. Will also be building Starship & Super Heavy simultaneously in both locations.
|

 

So the two new build sites in Texas are Starship Mk 1,and they'll be flying from the Eastern Range!!

Edited by DocM
  • TrevorLahey
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer

      By Figure 8 Dash · Posted

      This and Crazy Taxi are the two games that interested me the most from this showcase.
    • Ninja Theory's new Hellblade game is action-focused and set in Purgatory

      By Figure 8 Dash · Posted

      Good, because the nonstop chattering from the voices in her head made me quit the second game.
    • This new cabinet design lets you run AMD, Intel, and Nvidia PCs inside one case

      By hellowalkman · Posted

      This new cabinet design lets you run AMD, Intel, and Nvidia PCs inside one case by Sayan Sen At Computex 2026 earlier this month, AMD announced a couple of new X3D processors for both sockets AM4 and AM5 as it confirmed the support extension of the latter till 2029. And although Intel didn't unveil any new desktop chips, the company's Core Ultra 200S Plus series is relatively new too. Let's say though that you want the best of both worlds simultaneously, and instead of running two different systems, you can have both running together side-by-side, or rather on top of one another. That's exactly what Thermaltake's CAPO X dual system is made for doing. While it's not exactly mandatory to run AMD with Intel, or vice versa, you get the idea. As you can see in the render above, it is essentially like a double-decker PC case that is capable of holding two microATX (mATX) motherboards. Even running just one discrete graphics card in a PC can get toasty, so you may be wondering how well the cooling is designed on the CAPO X, Thermaltake has confirmed, as is evident from the marketing promo image above, that the case supports up to two 360 mm AIO liquid coolers. 420mm is not supported. In total there is room for 13 120mm case fans. In terms of I/O (input/output) options for the two systems, there are naturally two places for those ports, one at the top and one at the very bottom of the chassis in the front panel. In terms of use cases, there are many possibilities. Thermaltake itself, for example, highlights how one system can be your main PC while the other could be the AI agent PC. Another example given is how it can be used to stream and game simultaneously with dedicated systems instead of hogging one with the entire load. Nothing regarding pricing or availability was said. Source: Thermaltake (YouTube, X)
    • 25th anniversary Xbox Series X unveiled with classic translucent green design

      By +Ryster · Posted

      There might be some passive design improvements (cooling, etc), but I doubt they'd change the core performance spec of the hardware mid-generation when they've already got a new console in development.
    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer

      By LoneWolfSL · Posted

      State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer by Pulasthi Ariyasinghe A few months ago, Undead Labs broke its silence about the third entry in the State of Decay series since its announcement in 2020. Today, the studio had a brand-new trailer to reveal at the Xbox Games Showcase, finally giving players a look at the Unreal Engine 5-powered title. A broad 2027 release window is now attached to State of Decay 3 too. The studio confirmed that every scene seen in the gameplay trailer (except for the studio logo) released today is from the game with no cinematic footage. "The quality bar of the moment-to-moment experience is higher than anything we’ve achieved in Undead Labs’ history," says the studio. "State of Decay 3 is being built in Unreal Engine 5, and we’re creating better quality versions of what makes our game the survival sandbox it is, and the combat experience is really, really important to us, and I think you can see it coming through in this trailer." One new aspect of this upcoming entry is the Plague Nests. These are supposed to be dynamic, dungeon‑like enemy hubs with varied “personas” that change tactics each time one appears on a map. These areas will have the best loot in the game for players brave enough to tackle them. The combat system is being overhauled too, letting players do quick and power attacks depending on the situation. This isn't just on the player's side though, as zombies themselves now have multiple new types of behaviors depending on how fresh or decayed they are. "All of these play very differently, especially as you start getting outnumbered or when you’re making noise and running around and trying to save your rear end or the rear end of your friend next to you," adds the developer. Of course, settlement building and community management are massive parts of this third entry too. These are being further expanded with the cooperative focus, giving players much more freedom for playing together than in State of Decay 2. Players will even be able to split up and build settlements in different areas of the same map with different goals. Undead Labs confirmed that playtests are already ongoing for the title, and interested players can sign up to participate by heading over here once more slots open up ahead of the full release. State of Decay 3 is coming out on PC, Xbox Series X|S, PlayStation 5, and Xbox Game Pass sometime in 2027.

  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator

  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      68
    5. 5
      ATLien_0
      67
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!