Recommended Posts

On 13/08/2021 at 03:51, Skiver said:

That's actually a really good point I'd not considered. Lets pretend BO had their ###### together and had their proposed lander ready etc. How many launches is it going to take for them to get the same amount of equipment to the moon that a single HLS is capable of? I would assume similar to Starship the lander has no plans to ever return back to earth so it's not even launchers, it's also how many landers would it take? 

2nd pass,

 

10-20 LANDERS, each requiring 3-4 launches to get them through trans-lunar insertion, and non of them will carry items the size of a Starship cargo deck (or decks for the Cargo version). 

 

Also consider Starship HLS will also have a medical facility, 2 airlocks, and a sizeable radiation shelter. The benefits of being a SHIP vs a Conestoga wagon.

Does anyone know how the fueling process in space is going to go?

It sounds like a lot of people expect that the starship will go up first, and then get fueled by the same tanker x amounts of times.

 

But I was thinking it would be better to send up x amount of tankers hanging out fairly close, and then go tanking from one to the next.

 

Perhaps at first only use one tanker, until more are build, but at least sent up the first load before the starship, to save on the wait time in orbit and also have one load of fuel that you know will not fail on launch since the launch already happened.

 

Thoughts?

Edited by SALSN
On 16/08/2021 at 00:45, SALSN said:

Does anyone know how the fueling process in space is going to go?

It sounds like a lot of people expect that the starship will go up first, and then get fueled by the same tanker x amounts of times.

 

But I was thinking it would be better to send up x amount of tankers hanging out fairly close, and then go tanking from one to the next.

 

Perhaps at first only use one tanker, until more are build, but at least sent up the first load before the starship, to save on the wait time in orbit and also have one load of fuel that you know will not fail on launch since the launch already happened.

 

Thoughts?

For HLS or Mars missions, I would suggest that they send up a "Tanker" then refuel it till its full.

 

Once the tanker is full, send up the HLS or Mars Vehicle, fill up once from the tanker and then head off to the destination.

 

This way the tanker can be full, loitering in LEO until the transit vehicle is ready to launch, and there is only 1 refuel of the transit vehicle.

On 15/08/2021 at 10:45, SALSN said:

Does anyone know how the fueling process in space is going to go?

It sounds like a lot of people expect that the starship will go up first, and then get fueled by the same tanker x amounts of times.

 

But I was thinking it would be better to send up x amount of tankers hanging out fairly close, and then go tanking from one to the next.

 

Perhaps at first only use one tanker, until more are build, but at least sent up the first load before the starship, to save on the wait time in orbit and also have one load of fuel that you know will not fail on launch since the launch already happened.

 

Thoughs?

 

First they launch a Starship Storage (depot) ship into low Earth orbit, a variant built to minimize propellant loss due to evaporation.

 

Next comes a series of Starship Tankers, each capable of carrying up to 150 tonnes of propellant. How many depends on the mission, with Musk saying 4 should do it for a lunar mission. This would be ~600 tonnes, about 1/2 a Starship tank (1200 tonnes). A full tank would take it to Mars.

 

After Starship Storage has enough propellant stored, a mission Starship launches, docks, refuels and is on its way to wherever.

 

It's sounding like Starship Storage vehicles could be placed at arbitrary locations to support missions further out. Lunar or Mars orbit, Lagrange points, whatever. 

Edited by DocM
On 16/08/2021 at 22:26, DocM said:

 

First they launch a Starship Storage (depot) ship into low Earth orbit, a variant built to minimize propellant loss due to evaporation.

 

Next comes a series of Starship Tankers, each capable of carrying up to 150 tonnes of propellant. How many depends on the mission, with Musk saying 4 should do it for a lunar mission. This would be ~600 tonnes, about 1/2 a Starship tank (1200 tonnes). A full tank would take it to Mars.

 

After Starship Storage has enough propellant stored, a mission Starship launches, docks, refuels and is on its way to wherever.

 

It's sounding like Starship Storage vehicles could be placed at arbitrary locations to support missions further out. Lunar or Mars orbit, Lagrange points, whatever. 

Am I missing something. Why would starship be completely empty when it gets to orbit? Should superheavy not be made a bit bigger to reduce the amount of fuel starship needs to burn to get into orbit? 
 

Is it something along the lines of starships tanks are emptied to get to orbit. As are the tankers tanks, but the tankers payload is more fuel tanks and that’s what’s transferred, at 150t at a time?

On 16/08/2021 at 23:52, anthdci said:

 Should superheavy not be made a bit bigger to reduce the amount of fuel starship needs to burn to get into orbit?

Physics makes that hard. The more fuel you take up with you at one time, the heavier they rocket and the more thrust you need to get into orbit. The more thrust, the faster you burn the fuel.

On 17/08/2021 at 02:52, anthdci said:

Am I missing something. Why would starship be completely empty when it gets to orbit? Should superheavy not be made a bit bigger to reduce the amount of fuel starship needs to burn to get into orbit? 
 

Is it something along the lines of starships tanks are emptied to get to orbit. As are the tankers tanks, but the tankers payload is more fuel tanks and that’s what’s transferred, at 150t at a time?

The rocket equation is merciless and propellant mass vs vehicle mass is directly tied to how much payload mass you're putting into orbit, the altitude, inclination relative to the equator, and the latitude of the launch site.  A big feedback loop.

 

They've sized the tanks to have enough residuals for basic orbital ops to lighten the ship as much as possible at launch. Larger tanks to have more residuals in orbit starts the mass vs launch propellant feedback loop again. 

 

Result: Starship Tanker and a propellant Starship Storage (depot.)  Basically, a gas station. How much propellant is transferred from the depot depends on where you're going; geostationary orbit takes less than the Moon, Mars etc.

 

down the road they may preposition  depots at waypoints and destinations, likely using plasma thrusters (which SpaceX already makes), or leverage the nuclear engine DoD & NASA are designing. 

 

Edited by DocM

Erc X has Musk's input on many of his renders, and now Musk is talking about the front fins being 120° apart and more leeward - rather inverted Orca-like in Etc X's render.  Also an updated booster catch simulation.

 

 

 

20210818_103526.thumb.jpg.9be9a2cfc841348daff0eb3670aa822b.jpg

 

 

Edited by DocM
  • 2 weeks later...

QD = quick disconnect = hard umbilical; one for SH on the launch mount, one for Starship on a swing arm which also supports the stack before liftoff. 

 

The launch mount QD has been installed.

 

 

Edited by DocM
  • Like 2

Boca Chica TFR (temporary flight restriction), test could occur any time in September.

 

Perhaps a Super Heavy test

 

https://tfr.faa.gov/save_pages/detail_1_9481.html

 

Surface to 10,000 feet

From: August 31, 2021 2001 Eastern

To: September 30, 2021 1959 Eastern

 

 

 

  • Like 2
  • 2 weeks later...

That comment section is going to be a mess, with the supports vs subtractors of SpaceX fighting. I would hate to be the person who has to deal with that.

 

This may end up with some changes about public comment, which may be Elon's reason for tweeting that out.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
    • The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!