Unable to comment on certain articles.


Recommended Posts

I'm unable to post comments on certain articles on the site. For instance, I cannot make comments on the article Here.  Any ideas what might be happening?

 

It's not a cache issue because I tried with both Edge and Firefox with the same results. When I press the "Add Comment" button, nothing happens, except I get that "No" sign.

 

  • Like 2

I had a similar issue last weekend but clearing the cache and restarting the browser worked for me. It only happened on one of the front page articles and did not affect the forums at all. Don't know why it happened, but never reported as I was able to get it working on my side.

On 09/01/2022 at 09:27, Jester124 said:

I had a similar issue last weekend but clearing the cache and restarting the browser worked for me. It only happened on one of the front page articles and did not affect the forums at all. Don't know why it happened, but never reported as I was able to get it working on my side.

As I said, it is not a cache issue, as it happens with different browsers, I don't even use Firefox, just have it there as a backup for issues such as this one. (So no cache on it) and I was still unable to post.  Also, I don't seem to have any issues in the forum at all either.

 

Cheers.

On 09/01/2022 at 08:29, Ely said:

As I said, it is not a cache issue, as it happens with different browsers, I don't even use Firefox, just have it there as a backup for issues such as this one. (So no cache on it) and I was still unable to post.  Also, I don't seem to have any issues in the forum at all either.

 

Cheers.

Yeah, it seems only connected to main pages and my clearing of the cache was just what looked to have fixed mine. It may not have had any affect at all and whatever the actual cause was stopped during my troubleshooting. Are you able to post on any front page articles, or just the one? I do see one person was able to post on the one connected.

On 09/01/2022 at 09:34, Jester124 said:

Yeah, it seems only connected to main pages and my clearing of the cache was just what looked to have fixed mine. It may not have had any affect at all and whatever the actual cause was stopped during my troubleshooting. Are you able to post on any front page articles, or just the one? I do see one person was able to post on the one connected.

LOL yeah, it's funny, they commented right after I posted this question here. And to answer your question, yes, I'm able to comment on other articles on the homepage. I did comment on another article, and it went through without issue. Maybe it's just that one, not sure.

Had the same issue for some weeks now, submitting a comment to an article with no comments submits to a URL without the article ID, refreshing the page a number of times does eventually fix it. Check in developer tools > network and see if you see the same issue

Funny again, just tried once more, after numerous tries, and it finally went through. But there's definitely an issue lurking around somewhere.

  • Like 2
On 09/01/2022 at 08:40, Ely said:

LOL yeah, it's funny, they commented right after I posted this question here. And to answer your question, yes, I'm able to comment on other articles on the homepage. I haven't tried other posts except that one. Maybe it's just that one, not sure.

Got to love troubleshooting website issues!

 

On 09/01/2022 at 08:41, n_K said:

Had the same issue for some weeks now, submitting a comment to an article with no comments submits to a URL without the article ID, refreshing the page a number of times does eventually fix it. Check in developer tools > network and see if you see the same issue

That would have been a good thing to check and more than likely was my issue. To think of it, my issue was on a page that did not have any comments as well at the time.

On 09/01/2022 at 08:46, n_K said:

Just went to test it and it worked first time, isn't that always the way! 🤣

Always! Anything to make people look crazy. lol

I've been having this issue for months and it seems to be getting worse.

I've reported it a couple times but can't narrow down the cause and nothing shows errored in F12 dev console when it occurs either.

 

It seems to occur mostly for the first several minutes after an article is published

 

@DaveLegg I'm pretty sure I've brought up this issue to you before. maybe it's time to look into it again as it seems to be occurring more frequently now.

  • Like 2
On 10/01/2022 at 10:18, Brandon H said:

I've been having this issue for months and it seems to be getting worse.

I've reported it a couple times but can't narrow down the cause and nothing shows errored in F12 dev console when it occurs either.

 

It seems to occur mostly for the first several minutes after an article is published

 

@DaveLegg I'm pretty sure I've brought up this issue to you before. maybe it's time to look into it again as it seems to be occurring more frequently now.

I wonder if it's something related to the site's security/firewall/anti-spam defenses. It has happened to me several times. Also, the article I was trying to comment on was not new, even though it had no comments it has been published for more than 24 hours.

 

I have encountered this issue more than once as well.

 

Greetings.

On 12/01/2022 at 10:43, Sledge said:

Currently can't add comments either. Add comment isn't disabled, just does nothing when clicked. 

Yes, pretty annoying, seems to be happening to a lot of people.

  • Like 1

Additional info from todays posting efforts: 

- I can't add comment if I'm the first to post (Add comment is enabled, once click it disables but no comment appears).

- Once someone else posts I can now comment.

- Forum threads are all out of whack. People quote someone and it appears in the middle of another chain of posts within the same article.

 

See: Comment quoting out of order \ mismatched

 

Look above this comment by SidVicious and someone the msg below however it appears in a different chain:

SidVicious

 6 hours ago

Report

Xbox has no games that interests me...the last one was Lost Odyssey on the Xbox 360.
This aquisition changed nothing.

 

 

This also occurs with people quoting my posts. 

 

Have seen this fairly regularly in the past week, the above is latest example.

 

 

No wonder This Article on the front page has no comments. I just tried to comment on it and the same thing happened. It just shows that "No" sign, and it won't do anything.

 

It was also quite a mission to post this comment on the forum, the site was almost unreachable, but I guess that's something just temporary and totally unrelated to the other issue.

On 21/01/2022 at 19:26, Ely said:

No wonder This Article on the front page has no comments. I just tried to comment on it and the same thing happened. It just shows that "No" sign, and it won't do anything.

 

It was also quite a mission to post this comment on the forum, the site was almost unreachable, but I guess that's something just temporary and totally unrelated to the other issue.

I have been having some luck as of late, including being able to post on the mentioned page on first attempt. This issue is way to random 😕

On 21/01/2022 at 20:44, Jester124 said:

I have been having some luck as of late, including being able to post on the mentioned page on first attempt. This issue is way to random 😕

Yeah, it's definitely so random and weird of an issue. Hopefully they can find the root and fix it. I'm sure the reason many articles have no comment lately is because of this bug.

On 09/01/2022 at 07:41, n_K said:

Had the same issue for some weeks now, submitting a comment to an article with no comments submits to a URL without the article ID, refreshing the page a number of times does eventually fix it. Check in developer tools > network and see if you see the same issue

Yep, I’ve seen this too. 

On 09/01/2022 at 08:11, Ely said:

I'm unable to post comments on certain articles on the site. For instance, I cannot make comments on the article Here.  Any ideas what might be happening?

 

It's not a cache issue because I tried with both Edge and Firefox with the same results. When I press the "Add Comment" button, nothing happens, except I get that "No" sign.

 

photo_2022-01-09_09-08-20.thumb.jpg.31becc9253f0a7f371e90b017aa934ce.jpg

I have had the same issue you describe over the last few days and if I go back to the article a day or two later then it works as expected. Very strange.

On 22/01/2022 at 12:17, skinnyJM said:

I have had the same issue you describe over the last few days and if I go back to the article a day or two later then it works as expected. Very strange.

Yeah, it seems to be happening to a lot of people. Not sure if it will be fixed  any time soon because I haven't seen any acknowledgement from the Neowin staff regarding this issue so far.

On 22/01/2022 at 12:38, Steven P. said:

I have asked @DaveLeggand @Redmakto chime in here, as they will have to see what is causing it.

Thanks man, much appreciated!

Is this related to thread view? I post from up to 7 different devices and they all randomly change default thread view.

 

Have noticed if I set 'sort by oldest (thread view)' then add comment works.

 

Tested on https://www.neowin.net/news/bobby-kotick-ends-employee-meeting-quickly-fails-to-address-activision-blizzard-culture/

 

First post worked 'Just a ######' was the comment.

On 22/01/2022 at 14:19, Sledge said:

Is this related to thread view? I post from up to 7 different devices and they all randomly change default thread view.

 

Have noticed if I set 'sort by oldest (thread view)' then add comment works.

 

Tested on https://www.neowin.net/news/bobby-kotick-ends-employee-meeting-quickly-fails-to-address-activision-blizzard-culture/

 

First post worked 'Just a ######' was the comment.

Unfortunately, that didn't do it for me.  I still cannot send comments regardless of the thread view.  For example, I have tried more than 20 times in different ways to comment Here to no avail. I also tried reloading the page multiple times.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Fresh CachyOS install with Niri - I guess it's a little orange, but I'm working on it
    • FastStone Image Viewer 8.5 by Razvan Serea FastStone Image Viewer is a fast, stable, user-friendly image browser, converter and editor. It has a nice array of features that include image viewing, management, comparison, red-eye removal, emailing, resizing, cropping, retouching and color adjustments. Its innovative but intuitive full-screen mode provides quick access to EXIF information, thumbnail browser and major functionalities via hidden toolbars that pop up when your mouse touches the four edges of the screen. Other features include a high quality magnifier and a musical slideshow with 150+ transitional effects, as well as lossless JPEG transitions, drop shadow effects, image annotation, scanner support, histogram and much more. It supports all major graphic formats (BMP, JPEG, JPEG 2000, animated GIF, PNG, PCX, PSD, EPS, TIFF, WMF, ICO and TGA) and popular digital camera RAW formats (CRW, CR2, NEF, PEF, RAF, MRW, ORF, SRF, ARW, SR2, RW2 and DNG). FastStone Image Viewer features: Image browser and viewer with a familiar Windows Explorer-like user interface Support for many popular image formats and PDF viewing True Full Screen viewer with convenient image zoom support and unique fly-out menu panels Crystal-clear and customizable one-click image magnifier Powerful image editing tools: Resize/resample, rotate/flip, crop, sharpen/blur, adjust lighting/colors/curves/levels etc. Eleven re-sampling algorithms to choose from when resizing images Image color effects: gray scale, sepia, negative, Red/Green/Blue adjustment Image special effects: drop shadow, framing, bump map, sketch, oil painting, lens Draw texts, lines, highlights, rectangles, ovals and callout objects on images Clone Stamp and Healing Brush Superior red-eye effect removal/reduction with completely natural looking end result Multi-level Undo/Redo capability Single click to switch between best fit and actual size mode Image management, including file tagging, rating and drag-and-drop to copy/move/re-arrange files Histogram display with color counter feature Compare images side-by-side (up to 4 at a time) to easily cull those forgettable shots Image EXIF metadata support (plus comment editing for JPEGs) Configurable batch processing to convert/rename large or small collections of images Slideshow with 150+ transition effects and music support (MP3, WMA, WAV...) Create efficient image attachments for emailing to family and friends Print images with full page-layout control Create fully configurable contact sheets Create memorable artistic image montages from your family photos for personalized desktop wallpapers (Wallpaper Anywhere) Acquire images from scanners. Support batch scanning to PDF, TIFF, JPEG and PNG Versatile screen capture capability Powerful Save As interface to compare image quality and control generated file size Run favorite external editors with one keystroke from within Image Viewer Offer portable version of the program which can be run from a removable storage device Configurable mouse wheel support Support themes (bright, gray and dark) Support dual-monitor configurations Support touch interface (tap, swipe, pinch) Support dual instances Play video and audio files (Third party codecs may be required for old versions of Windows) And much more... FastStone Image Viewer 8.5 changelog: Added support for SVG format Added Start importing automatically and Handle duplicate file names automatically options to the Import Photos and Videos tool WebP files can now be rotated and saved with a single click Enhanced dark theme support in the PDF viewer Fixed a bug where some links in PDF files were not clickable Other improvements and bug fixes Download: FastStone Image Viewer 8.5 | Portable | ~15.0 MB (Freeware) View: FastStone Image Viewer Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yup, broke my comp… again. its times like this when I regret AMD. This just never happens on NV.
    • Huh? You're delusional calling the Steam Deck dead. It is so successful that it has sold out multiple times. Even after the price hike this year it sold out again with 24 hours of being back in stock. The demand is real and has not died down even after four years.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      160
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!