P4 1.8GHz or AMD Athlon XP And Why?


Recommended Posts

Jumpin' Jesus on a pogo stick!!!!

You guys are nuts.

Intel HAS good chips. Very few things flat out touch a Xeon.

I think Intel took a wrong turn with the P4, but multi-threading may turn that around.

AMD has good chips. No they aren't as cool as Pentiums. But they do have a better overall design with their shorter, w-i-d-e-r pipelines, which is how they out perform Pentiums.

Calling people stupid because you haven't taken the proper time to install a chipset properly is your own problem. I'll be happy to charge you on an hourly basis so you can work through this anger you have. Therapy is a good thing.

Alot of people on the Intel side aren't really using facts to back their arguments. C'mon guys, support your favorite chip with FACTS. I've had many Intel chips just 'go bad'. My Intel rep shakes his head and offers me a discount to upgrade. :|

I would love to hear good things about Intel again.

Heaven forbid two different chips, made different ways, can't better the other in different areas?

Calling names IS childish. and if you go back and read this thread, it's the Intel guys sounding 14 right now. Most AMD peeps know there chips pretty well, usually because they were once Intel peeps who took a big chance switching over. Most AMD users I know did alot of research before taking that step.

Hopefully, Intel users would be so kind as to deliver the same and stop the name calling?

BTW: I have bad habits older than most of you peeps, so watch who your calling a kid. It took me 4 months of daily research and talking to experienced AMD users and private retailers before I switched -> it was my bosses money on the line, and it would come out of my bonus if something went wrong. Better beleive AMD is good.

1) the main diffences between p4 and athlonxp are power consumption and heat. as long as athlonxp suffers from this, they will never be a good consumer chip

P4 sucks up 70 watts of power and needs a proper power supply. P4 consumes as much power as Athlons. It seems to me that all of the frying and heat arguments come from one video tom's hardware made. However AMD do run at higher temp than Intel.

2)athlonxp is cheaply made...why else do you think amd can keep selling the chips at the price they are

Have you ever though about the reason Intel cost more is because Intel can get away with it. If you own like 90 percent of the market share(i'm not sure of the figures that is a huge majority) yes you could charge whatever the hell you want. Also Intel know that a lot of people associate Intel as a quality brand so they are willing to pay what ever price to get Intel. They charge a higher premium than the Athlon. There is no way AMD can sell their CPUs at the same price because people would rather buy Intel since the vast majority of people tend to stick with a well known name brand. So AMD charge a lesser premium than Intel. If P4 is such a quality CPU why would Intel had to add more cache and switch to .13 micron and support DDR and gasp SDRAM and basically ditch RDRAM. If the P4 is so well made why did they have to revamp it with the Northwood chips? The fact is the P4 have flaws as do Athlons. Also AMD is not a small newcomer to making CPUs.

3)current architecture amd uses has no future..can't even reach 2.0ghz, whereas the p4 northwood currently works fine at 3ghz

Clock Speed does not mean everything and that is the truth. These are exactly the reasons why Intel can cash on the Mhz myth. 3ghz won't mean any thing if a it is ouperformed by a processor running at lower clock speed.

4)amd doesn't have a good quality chipset....nforce is expensive and already out of date.

There plenty of quality chipsets for the AMD platform. They don't however match the ones Intel makes. and how is nforce out of date?

Why is it that most arguments that Intel supporters make just attack the flaws of AMD solutions and thus a couple flaws means AMD is not a got chip. Intel is not immune to flaws either. They also suffer with problems with their chips.

This is whoa.... 5 pages of flame.. these pages are so hot no wonder my AMD system is 50C right now.. LOL... That's the overclocked temp so chill out people...

/me ****es on the board to cool it down!!

calm down people... if you got an AMD then rep it to the fullest and if you got Intel then rep that too...

/edit

dysan - hey man good points. And another reason why Intel chips are so expensive is because they advertise so much that everyone knows them. They charge you for that too and dont' say they don't cuz they gotta charge for the advertising the do. This war been going on for ages and wont ever end so just do what pleases you i suggest.

Actually, one of the principal reasons Intel processors are more expensive is because they are physically larger than the AMD counterpart. That equates to fewer chips per wafer.

I don't dispute the fact that there are other reasons as well. But that is one of the major contributing factors.

This from Tom's Hardware:

"Another factor is the stability and product quality of a system: while all Athlon processors suffered from occasional instability in our tests, the Pentium 4 platform ran without a glitch. Reasons for this behaviour might not lie in the processor itself, but rather in the motherboard design and the chipset used."

-October 2001

And this:

"In any case, one thing is visible: in the majority of performance tests, the new Pentium 4/2200 is ahead."

-January 2002

And . . .

"In the benchmark results, the Athlon XP 2300+ cannot quite keep pace with the Intel Pentium 4/3000."

-January 2002

He's your boy AMD'rs

By the by, I have not called anyone any names and I have boots older than many of the post authors here.

This thread is getting out of hand, way too many immature people posting worthless crap insulting other people.

Do I need to remind you people this is a Performance debate not personal verbal attackings?

Intel guys get the facts and the benchmarks through your thick little sculls and accept the fact that for just about everything except for pure clock speed and power consumption/heat dissapation the AMD flat out wins

Originally posted by TimeRider  

Actually, one of the principal reasons Intel processors are more expensive is because they are physically larger than the AMD counterpart.  That equates to fewer chips per wafer....

what tha... i'm not flaming but where do you get your info? The p4 is much smaller than the Athlon. have you seen the sockets and or the chips? Well ok... here's a side by side!

hehe... once again... tomshardware to the rescue... :)

Uhhhhh . . . . sorry SHoTTa35 but those pictures demonstrate the size of the substrate not the chip itself. While you can see the Athlon chip (the little square in the center), you cannot see the Intel chip as it has a big metal heat spreader on it.

Physically, the P4 chip is about 30% to 40% larger and has something like half again as many transistors.

Read this one:

http://www.electronicstimes.com/story/OEG20020128S0007

oh... hehe.. well my bad :) i thought you meant the total packaging! :) SORRY!

and to that kid who thinks the P4 runs on the 400Mhz FSB then you're just plain wrong... the new core that comes out at 533mhz is only the memory clock not the FSB. the P4s still run at 133FSB and the rest of the system runs at the higher bus.

(I THINK!!)

Originally posted by Chris123NT  

 And vraa is ur typical 14 year old.  A stupid ****!

whoa.. that was plain out mean

i do have a stock HSF and FAN and they are running pretty cool.. but like i said not on my comp tho.. i have that thermal paste..

that having many fans thing i won't argue about.. i have a total of seven fans

two in the front

one in the back

on on cpu each which totals two

and one on graphics card

and on on Powersupply

itsnot that loud.. if i had one of those decibals meter things i would give yall info on how loud it was

when yall say the XP is cheaply made isn't that new intel made for only 55USD? i'm not sure so don't get mad at me for that..

i am not one of those kids that pure out hates intel.. i just don't like celerons and pentiums..

xeon's infact are prolly the coolest server cpu's.. i'm not sure about that tho cuz i hear people saying PIII Xeon's.. hmm..

i do have my side of the case open.. that might be why i have a low temp but thats only cuz i'm still working on my computer.. i've only have amy tyan board for about a week and a half.. its going perfect. nothing has caught on fire or stuff

Hmmm what I am really sick of is some Intel users who are stuckup and simply diss AMD and the people who use AMD processors and insult those people.

I myself am 14 and don't have lots and lots of money to spend on a processor. The fact is, I can get just as good quality and even better performance with an AMD processor than with a slightly more expensive Intel processor. If I was as wealthy and fortunate as some I would probably be buying Intel processors too but I'm not. This is not to say that AMD processors are just for people like me though. I think AMD have done a darn good job of going head on with Intel and I think they will continue to do so. I mean even an XP 2000+ is still in the same league as a P4 Northwood 2.2Ghz and thats pretty good considering its only running at 1.66 Ghz. Even if Intel remains ahead, AMD will always be right behind it proving to be a very good alternative.

So come on people... This is Neowin, we're supposed to be part of a community not part of a processor war. :p

Xe|oN:

I hear you . . . really I do. But let's be honest about one thing. The AMD owner's "diss" the Intel owners with equal vigor. It's like the Ford vs. Chevy debate.

I think what gets the ire of most Intel enthusiasts is the condescending language that seems pervasive in this argument.

I have said it before, and I will say it again. There is no way to compare these processors on an even playing field. AMD is rooted in x87 and Intel has moved to NetBurst. If you benchmark an Athlon with software optimised for NetBurst it will perform poorly by comparison. If you benchmark a P4 with software optimised for x87 it will perform poorly by comparison. No reviewer worth his salt would deny this observation.

Because Intel holds such a large market share, more and more software will be written to optimise this new instruction set. AMD will lose ground without some change in the basic structure of their chip. I think most would also agree that the current architecture of the Athlon is reaching the limits of its ability. Right now the P4 is a processor with an eye on the future, AMD is still rooted in the past . . .

JMHO

I will not lie...I have always prefered Intel. AMD however has turned out to be a hell of a deal for it's price.

If you have a limited budget and want a good PC get AMD with DDR.

If money does not matter get the fastest out there. P4 2.2GHz with DDR (less new RDRAM is out and better, i have not kept up with RDRAM lately). It is proven that it ourperforms all competors and are you wondering why...AMD has been known to get hot as it is...well AMD still has a .18 micron level, the new P4 however is down to .13!

Also, if you like to overclock, get the P4. It can easily be overclocked at descent speeds without major coolding.

Enjoy your decision.

www.tomshardware.com

(good place as one guy said to get facts)

The only reason the Intel fanboys are so mad is because the payed the big money for their P4s so they have to back it up with something. Hey, if I payed 1,000 more for a system with less perfomance, I would be mad too. They got those "Dell systems with Intel P4... which is so nice" lol

Yeah so nice because it costs $53 to make and we sell them at $400+. Go to www.anandtech.com and check out any current review to see what is the best, those guys dont care what brand anything is, as long as it has the best performance.

Also, the Athlon XP uses .15m technology, Intel even took apart an XP and said it was smaller than .18. Just wait tell then Fall when its Hammertime.

here are 2 facts that remain true every since my last post

and that will continue to remain true even after my post

so every AMD fan out there will know it and be bothered by it because its the only thing they have.

when you say facts i guess you mean the benchmarks you people hold so dear since thats all you have to hang on to.

but anyway

1. benchmarks (the only purpose they serve is puroses like these, to brag when nobody cares really)

2. you wouldnt be able to tell the difference between an intel system or an AMD one if they were sat side by side and you had to evaulate each (maybe you would be able to since one would sound like a blender and the other one wouldnt)

anything you amd fans say after this is useless junk and shouldnt be taken seriously by anybody since the only thing you will have to say after this is more benchmark jabber and/or trying to mock or make fun or say something sarcastic and ignorant about my post.

if you have anything other than yeah it can outperform this when you have never tried it yourself then we're all ears.

until you stop quoting toms hardware and what other sites are doing then it is of no use to any one on this board.

now every one do me a favor and review the past 10 or so pages and look at how many times benchmarking has been brought up.

and remind me how that matters when you are surfing a board like neowin and playing games?

and to all the people that say Intel supporters havent brought up facts.

benchmarks to you fools are all the fact you need right?

it would be funny as hell to find out that whoever created the program made it biased then you would shut up so fast :)

"The only reason the Intel fanboys are so mad is because the payed the big money for their P4s so they have to back it up with something."

I'm not mad at all. I gladly paid the money, no reservations, no hesitation and no regrets.

That statement is right up there with "nah-nah na-nah-nah."

Grow up.

Actually I built my own, but if I were to buy a branded system it would in fact be a Dell.

well Freeza [cool name!], let my respond;

You've thrown the baby out with the bath.

You say benchmarks don't matter, and basically again, benchmarks don't matter.

Benchmarks are an excellent way to determine real world performance. If a benchmark by a reputable tester tells me that Athlon XP performs Photoshop renders faster than a P4, and my shop performs about a hundred filters a day, that means alot to me.

If I'm a Quake3 player that loves insane lvls, then the P4 FPS benchmark has a practical meaning to me.

Biased software? If anything, most software will be biased in favor of Intel.

You've seemed to close your mind off to the fact that someone other than Intel could do anything good at all.

But did you read the title of this thread? The poor guy wants to know what chip he should buy and why. Benchmarks are a standard recognized way of evaluation. Seems to me thats what the guy is asking for, along with any install problems, benefits, etc...

Originally posted by TimeRider  

Xe|oN:

...........

I have said it before, and I will say it again.  ..... x87 and Intel has moved to NetBurst. ....

you said it before and you said it again and both times you are wrong. i thought it was X86??? LOL.... hmm who knows though.. i'm just an AMD user who knows nothing. Both processors are X86 but the P4 just adds other instructions, like MMX, SSE, SSE2 and AMD added those (except SSE2) as well as 3DNow and Advanced 3DNow.

Netburst is just an extra set of instructions to improve in certain areas of computing!

/edit

and good points my nukka deadzombie... I used to have P4 and i sold it and built a "slower" AMD system and still had money to go buy icecream and more stuff to celebrate the speed boost i got in my computing needs...

Ok... to end this, let's ask Bain (the thread starter) to see if he come to a conclusion on which processor is his choice... I think Bain had a headache from all the fighting already... so he must have missed a few points from some people who responds to this thread... nevertheless, I want to know his final decision on which processor is his choice... :)

So which is it Bain? AMD or Intel? :) Choose wisely or we're going to hammer you! :) hehehehe j/k

From personal experience:

When I bought my new PC, I left my Intel Pentium II and Intel 440BX chipset MB... my friend convinced me to go AMD because of better performance.

I went to an Athlon Thunderbird 1Ghz and VIA KT133A chipset MB, mainly because I had been reading good things about the setup: That an AMD outperformed an Intel chip at an equivalent speed.

The other reason I went AMD was that it was much cheaper than the Intel Pentium III 1Ghz combo I was looking at.

Anyways, I immediately had problems. USB, sound crackling, Windows 2000 blue screening with a stop error once in a while.

It took me a few weeks of researching and troubleshooting to get my system rock-solid stable and my system has been awesome since.

BUT there seems to always be new problems arising. Video card incompatibilities, sound card problems, burning problems.... I know these are a VIA chipset problem and not AMD but the fact still remains I never had one single problem with my Intel setup before I upgraded. Not one problem. Ever.

Looking back now, I somewhat regret leaving my Intel setup. I sacrificed stability and compatibility for what? A little bit more performance and the AMD was cheaper.

Well, the money I saved wasn`t worth the trouble I`ve encountered, and I can honestly say that when I upgrade my MB and CPU I`ll be going back to an Intel solution.

Just wanted to tell you my story because I`ve experienced both sides of the fence.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • (I know it's just an image and also not the point at all, but it really bugs me that the two halves of the necklace don't really fit together... 😅)
    • It is the same everywhere. Gitlab's boss recently had a lengthily blog post about the future of AI in the company and in general. The usual drum beating. When I saw it I checked their stock prices - close to 50% down.
    • Cloud Security Fundamentals eBook —was $131.95, now free to download by Steven Parker Claim your complimentary copy (worth $131.95) of "Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms" for free, before the offer ends on July 1. Description In Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms, cybersecurity leader and educator, Jason Edwards, delivers a comprehensive guide to safeguarding data, applications, and infrastructure in the cloud. The author offers a complete walkthrough of cloud security, moving from foundational concepts to advanced, forward-looking practices. The book is filled with practical examples, hands-on guidance, and lessons drawn from real-world cloud security incidents and breaches. It equips readers with the tools and knowledge they need to defend against threats in cloud environments and how to understand coming developments in cloud technology that will impact organizations in all industries. Inside the book: A thorough introduction to cloud-native and advanced security practices for contemporary firms A chapter on relevant cloud security certifications and professional growth advice Practical discussions of foundational concepts in cloud security, including IAM, Zero Trust, and DevSecOps Complete treatments of advanced cloud security themes, like leadership strategies, operational best practices, and techniques for dealing with common and emerging threats Perfect for cloud security professionals, IT managers, and DevOps professionals, Cloud Security Fundamentals will also benefit system administrators, compliance and risk officers, consultants, auditors, and technology students in a variety of fields who require a foundational understanding of cloud security concepts. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $131.95, but is now FREE | Below link offer expires on July 1. Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • TerraMaster F4-425 Pro review: an octa-core Intel NAS that ships with AI (OpenClaw) by Steven Parker It has been a while since I reviewed a TerraMaster NAS, but the company reached out to me asking if I was willing to test the F4-425 Pro, which goes on sale today. It is an upgrade on the F4-425 Plus, which I reviewed back in October 2025 What you need to know is that it basically follows the design principles of the four-bay F4-425 series, with its all-metal exterior. Here are the most important specifications: TerraMaster F4-425 Pro CPU Intel Core N350 (8x E Cores/Threads, Max burst up to 3.9 GHz) Intel Core N305 (4x E Cores/Threads, Max burst up to 3.8 GHz) TDP: 7W / 9W (Base) Graphics Intel UHD Graphics 32 EUs (1.35 GHz) Intel UHD Graphics 24 EUs (1.25 GHz) Memory 1x slot 16 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) 1x slot 8 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) Disk Capacity 120 TB (30 TB x 4) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Network 2x RJ-45 5 GbE Internal storage 3x M.2 2280 NVMe Slot (PCIe 3.0 x1) Bootloader 2Gbit 256 GB NAND Flash card (MX30LF2G28AD) USB port (internal) USB Ports 1x Type-C 3.2 Gen 2 (10Gbps) 3x Type-A 3.2 Gen 2 (10Gbps) HDMI 1x (HDMI) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Size (H/W/D) 219 x 181 x 150 mm Weight 2.9 kg System Fan 150 x181 x 219 mm Power 90W, 100V - 240V AC, 50/60 Hz, Single frequency Power consumption (HDDs) 45W (4x 4TB ST4000VN008 in read/write state) 14W (4x 4TB ST4000VN008 in hibernation) Noise Level: 20.9 dB(A) Using 4 SATA HDDs/SSDs in standby mode; Test environment noise: 17.3dB(A); Test distance: 1m Warranty 2 Years OS TOS 7.0.0706 (Beta) MSRP £639.99, $699.99, €739.99 / £739.99, $799.99, €839.99 As you can see above, there are two variants of the F4-425 Pro releasing today. The lesser variant has the slightly weaker N305 CPU and iGP, and 8 GB less RAM, although it also costs $100 less than the top variant we are testing today. In addition, these new F4-425 Pros are shipped with the as-yet-unreleased TOS 7 beta. So what is TOS 7 exactly? During the device initialization, you are warned not to use it in a production environment, which we'll get into later. My contact told me that TOS 7 exits beta today, June 23 with version 7.0.0746. The clear difference with the F4-425 Plus is that it contains the more powerful N350 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, LPDDR5 (4800), DDR5 and DDR4, and a max TDP of just 7W. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Alder Lake-N series that sits just below the top N355 offering, albeit with an impressive TDP (less than the N355 and N305) for the features it offers. It is designed for low- powered systems and entry-level laptops. As before, we are seeing another NAS with an acceptable, if not great, amount of RAM. It should be noted that the F4-425 Pro only has one SODIMM slot, so if you are planning to upgrade the already 16GB included in this NAS, it will have to be on one module of Single Rank DDR5. As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. Before we dive in, you can view the different SKUs released so far since the 2025 series launched for Home and SMB users, with the most important specifications listed along with the MSRP listed below: SKU CPU Cores Memory Link Price F2-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $249.99 F4-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $369.99 F2-425 Plus Intel Core N150 4 8 GB DDR5 5 GbE x 2 $399.99 F4-425 Plus Intel Core N150 4 16 GB DDR5 5 GbE x 2 $569.99 F4-425 Pro Intel Core N305 8 8 GB DDR5 5 GbE x 2 $699.99 F4-425 Pro Intel Core N350 8 16 GB DDR5 5 GbE x 2 $799.99 The F2 in the product name means two 3.5-inch HDD bays, where F4 is four 2.5-inch bays. First impressions Like with the F8 SSD Plus packaging, the F4-425 Pro is using the upgraded box materials, which certainly look better than a plain cream colored box with TERRAMASTER stamped on the sides. The box gives off a premium feel and certainly adds a positive vibe to first impressions. In the box F4-425 Pro TNAS device Power adapter LAN cable (CAT 6) Quick guide [full online guide] Limited warranty notice Screws (for HDD bays) Stickers 2x rubber feet (spares) Design As has become kind of common with TerraMaster, certainly in the last three years, the 2025 F2- and F4-series have received a makeover that really adds to the premium feel of the NAS. Gone are the plastic shells, now replaced with an aluminum outer shell, with the front and back retaining the textured black plastic we saw on the 2024 models. Some key differences from the 2024 series include placing the power button back on the front, along with the addition of a Type A USB port. It's not much bigger or heavier either; in fact, it weighs 500 grams less than the F4-424 Pro. It's slightly shorter in height and depth (length), but only by a few millimeters. The front and back do retain a similar style to the 2024 series. On the front, you just have your four bays along with LED indicators for the HDDs and power. The welcomed change is having a USB port on the front for quick access, should you need to back up a USB drive, for example. Around the back, from top to bottom, you have a reset pin hole, an HDMI port, two 5 GbE Ethernet ports, two USB 3.2 Gen 2 (10 Gbps) Type A ports with a Type-C port below them, and a connector for the barrel port power source. Again, there's no Kensington Security Slot present, which is a bit of a shame considering it's a data storage device. Left side Right side On the left and right of the F4-425 Plus, it is completely smooth aluminum with a TERRAMASTER logo printed on both sides. On the bottom, there are some holes to assist ventilation. Unlike with the F4-425 Plus, the rubber feet did come unstuck during the teardown, which was also an issue on the 2023 series. It seems like other customers have lodged complaints about them, as TerraMaster now includes two spare rubber feet in the box, in case any of the preinstalled ones are lost; however, this seems more like a papering over the cracks solution rather than actually fixing the issue with better quality rubber stand-offs. There are also four screws that must be removed in order to access the internals. Teardown Upon removing the four screws, you can slide the device out of its shell to reveal the three NVMe M.2 slots (PCIe 3.0 X1) and single SODIMM slot connector, which is populated with a single 16GB DDR5 4800MT/s module. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $492.99 that TEAMGROUP supplied us with, along with a 250GB 970 Evo Plus that my colleague Chris White sent me by accident and let me keep a few years ago. As I have said in previous reviews, TerraMaster support staff actually encourage installing whatever you want on their devices, and happily, the USB port for the bootloader is now easily accessible should you want to use it for your own flavor of NAS OS, such as TrueNAS, Unraid, or maybe Xpenology. Yes, because TerraMaster has now switched to a 256 GB NAND Flash card (3rd photo above) for the TOS bootloader. This is also replaceable, but you can also simply add a USB bootloader, access the BIOS, and tell the F4-425 Pro to boot from that instead of the Flash card. Unlike earlier iterations of TerraMaster NAS, you don't have to tear this down any further than the four screws on the outer shell in order to be able to access and manage the memory, NVMe slots, and USB bootloader. However, if you need to access the NAND Flash card or CMOS battery, then eight more screws (four on each side) need to be removed in order to take off the rear panel with the 120mm fan, and then the motherboard can be lifted off and removed from the SATA connector PCB. There's also no risk of threading the screw holes, because the four that hold the shell in place are metal on metal, while the screws that hold the rear panel on do screw into plastic. Either way, like last time when I reviewed the F4-425 plus, I was just happier to see larger screws being used. Overall, it follows some great improvements in build quality from the 2024 series and earlier. Setup BIOS The F4-425 Pro includes an Aptio BIOS from American Megatrends [1, 2], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to the USB bootloader so this would still allow you to switch to a USB stick with an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Setup is roughly the same as the F4-425 Plus, along with the new TOS 7 setup dialogs, so there will be no surprises here. Upon connecting to the LAN and booting up, the F4-425 Pro can be reached by navigating to http://tnas.local. If that doesn't work, you can use the local address assigned via DHCP, which you can find using the TNAS PC desktop application, which is essentially a TerraMaster NAS finder. The setup process is pretty straightforward, through a wizard, and in full below: TOS 7 Initialization As you can see, TOS 7 received a new coat of paint, and the initialization requires fewer interactions. Happily, TOS no longer decides to throw all disks into the same Storage Pool; 2.5-inch HDDs are allocated into Storage Pool 1. This is because two of the HDDs are allocated to hold system files. Previously (with TOS 5 and 6), if you pre-installed HDDs and SSDs, they were all placed into Storage Pool 1, even if you did not select the SSDs for inclusion during the onboarding. TOS 7 Setup On first boot, there is a tutorial and some steps to take to harden the TNAS (or not), which includes an immediate update from TOS 7.0.0616 to 7.0.0706, of which the changelog screenshot is also included in the above gallery. It must be noted that the Security Advisor still contains (in my opinion) a pretty major bug in that if you enable SPC and then do the required rebooting, the Security Advisor still says that SPC is disabled. TerraMaster provided the following statement about it: It is disappointing that TOS 7 has been in beta since December, and this OOBE issue is still there. Shutdown option has moved Instead of a Taskbar option to manage the NAS, all of these options have been moved to a "Start panel", initially I didn't see it and my contact had to show me how to power off the F4-425 Pro. To logout, reboot or power off you can find those controls at the top right of the Panel. It is also possible to power off through the TNAS mobile app beta. Storage setup Above, you can see the steps I took to create the Storage Pools and Volumes. I made a second Storage Pool using TRAID on two 4TB MP44Q SSDs (which, in this instance, is similar to RAID 5), and finally, I added the 250GB 970 Evo Plus drive as Hyper Cache on Storage Pool 1 in Balanced mode. Registering If you decide not to lock down the F4-425 Pro in Security Isolation Mode (blocking all external connections), then you could set up a TNAS device ID through the Remote Access setting in the Control Panel (which must be unique). This works in combination with an online TerraMaster account. TOS 7 TNAS Online Creating a TerraMaster account and linking the device online activates the warranty when you provide proof of purchase and the serial number, but it also gives you access through the TNAS mobile app, which allows you to complete certain operationsб including powering off and restarting the NAS remotely. A TNAS mobile update is required to gain access through TOS 7, and this is provided on the TerraMaster website, as it is not yet on Google Play. The app is evolving all the time and has made leaps and bounds since I first started reviewing TerraMaster devices almost three years ago. It is not quite there yet if you are comparing the likes of Synology, which, sadly, a lot of users online do all the time. OpenClaw setup One of the main selling points of the new F4-425 Pro is the inclusion of OpenClaw, with TerraMaster claiming that it is "powered by the world's first AI-native TOS 7 OS, supporting local-first smart workflows and independent data control." However, I immediately ran into problems trying to enable OpenClaw. After waiting 20 minutes at the "Enabling" message of the OpenClaw app following installation, I decided to do some searching online and discovered that it couldn't complete the installation process due to SPC being enabled, which is something TOS 7 immediately recommends to be enabled on first boot. SPC for NAS (TOS 7) is basically the same principle as UAC in Windows; it blocks executables from being launched by non-Super Users. After reaching out to my contact about these issues, I received the following response: Anyway, this only became clear when I closed the OpenClaw app screen and clicked on the OpenClaw icon in the taskbar; that is when I saw the message about disabling SPC. I think, due to the fact that this is a requirement, this should be a prompt during the installation process, not when closing the App Market and then trying to launch OpenClaw. There's also no 'Getting started' guide for people like me who have never used OpenClaw. I tried to add an LLM and discovered the tutorial led nowhere. That's when I started looking around the official TerraMaster forums, and I found a guide that helpfully explains that you won't get anywhere with OpenClaw unless you have a paid plan, which is disappointing because I imagined there would be an option to use a local LLM as I do in SubtitleEdit with Whisper-XXL. In addition, with the marketing imagery on the official site, it says that the OpenClaw feature is "all processed 100% locally for absolute privacy." which led me to believe that I could install a local LLM, not one that required paid tokens. In any case, TerraMaster does not provide guidance for this new feature, which was also a selling point of the F4-425 Pro! My contact also provided clarification about the above points I raised with TerraMaster Since it is not in the scope of the review to add paid services, I'll leave that to the people who are more qualified with OpenClaw. F4-425 Pro Surveillance App TOS also comes with a Surveillance app, which is not installed by default; it can be found in the App Market recommended section. In addition, after installing, it doesn't drop a shortcut on the Desktop or top taskbar, but you can "Send to Desktop" from the App Market listing for the app for a quick way to open it. Adding my Reolink POE doorbell camera was painless. TerraMaster doesn't appear to have a repository of preconfigured cameras; instead, the camera must be added using ONVIF or RTSP. No mobile Surveillance app TerraMaster still doesn't have a dedicated Surveillance app, although from searching online, Surveillance can be used and managed through the TNAS mobile app. I tried this with the updated TNAS mobile app beta in combination with TOS 7 and got a message that Surveillance was "Only accessible through web browser," so I reckon this must be limited to the stable versions of TOS 6 and the mobile app. More quirks In addition, whenever I minimized the Live View window in the browser Surveillance app, the feed appeared to switch to the Low-bandwidth stream, and there was no way to get the High-quality stream back. To get the High-quality stream back, I had to close Live View and then reopen it. Benchmarking A pretty cool feature of the TOS 7 is that it allows you to install directly to the NVMe M.2 SSD. In order to do that, you would have to leave out any HDDs during initialization, and even then, the system partitions are always written to two HDDs when they are eventually added. With three NVMe slots, this also gives an interesting scenario where you could build a TRAID storage Pool for installing all your apps and Docker on, and keep the third for SSD cache on the HDD pool. Limitless options! SATA PCIe 3.0 X1 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 5 GbE hub was well within acceptable ranges. Although the read result on SATA was a little less than with the F4-425 Plus, for some reason, while writes were generally better. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 5GbE connection. Of course, you can also opt to bond the two 5 GbE connections for a bit more umph, but I didn't do that. TOS 7, which, as of testing, is still in Beta, comes with an App Center that has a bunch of handy programs you can install right off the bat, such as Emby, Plex, Docker, as well as in-house Backup and Surveillance solutions. As you can imagine, any media streaming services you would want to host off the F4-425 Pro will work great, thanks to the Intel Core N350 CPU and its 16 GB of DDR5 memory. Accessing from mobile is only possible if Security Isolation Mode is disabled, which can put your NAS at risk from external sources, so there was no way to access it from the TNAS Mobile app. It's also quiet. I had this sat next to my computer on my work desk for the past week, and I did wonder if the noise I was accustomed to with NAS devices would annoy me, but all I could hear was a soft whirring of the rear fan (which was a little annoying) when the disks were not actively copying or reading data. Conclusion So what have I learned? Unfortunately, this release raises a few important questions and concerns that I feel haven't been adequately addressed. What I didn't like Our variant shipped with TOS 7 beta, and it's advised not to use it in a production environment. I feel that's a bit limiting on an $800 device. The mobile app is also still in beta and does not support some of the first-party apps, like Surveillance, and it still has quite a few bugs. I am a bit confused about the OpenClaw marketing along with the F4-425 Pro. I feel like that if it's going to be a main selling point, then offer official guidance on how to get started with it. TerraMaster recommends enabling SPC, but then markets the NAS for use with OpenClaw, which requires disabling SPC to be able to use it, opening up genuine security concerns for the NAS; and that's before you get into the security concerns of OpenClaw itself. Of course, the above issues won't be a problem if you decide to install something else on it, or even go back to the stable TOS 6. I wish TerraMaster had just given TOS 7 as opt-in rather than shipping with it. TOS 7 has been available as a preview since December 2025 (so well before my last TerraMaster review), and according to a thread on Reddit where a user shared a screenshot from the TerraMaster Facebook page, it is scheduled to launch today, June 23, but there's nothing about that in the TerraMaster news blog. My contact confirmed over email that TOS 7 exits beta today. The rubber feet also deserve a mention as they continue to be a problem, with them coming unstuck the moment you shift the F4-425 Pro anywhere on your desk. What I liked What it comes down to, though, aside from what I already mentioned, you are still getting a quality, affordable device here, so recommending it will depend on the individual's use case. If you're just looking for a relatively small NAS device to manage virtual machines on, backup your files, and take care of your home theater streaming, then it is a great device that will certainly futureproof you for some time. It provides good performance, takes up little space, and is, on the whole, very quiet. Four bays afford proper redundancy using TRAID or RAID 5, and you can even expand on storage capacity by adding the 2-bay D5, or 4-bay D8 Hybrid DAS over a USB 3.2 (10Gbps) link. Considering the 2024 releases were more about power, with the likes of an Intel Core i5-1235U high-end laptop CPU under the hood, I asked my contact last time if we could expect more of the same in higher-end models and was told: It makes a lot of sense to use Intel's N350 chip inside a NAS; it is more than capable of doing what the F4-425 Pro is intended for, media streaming and backup. The only downside is still the clear lack of community and even staff support on the official forums. In the past, I have had topics go unanswered for days, or there would be generic-type "we've noted this and passed it onto our developer team" type responses. Along with the other things I mentioned, it all ends up costing it a couple of points. If you are comfortable with the command line, Docker, and setting up TrueNAS or Unraid, you'll be fine. You can do great things with this hardware. In TOS, the apps are a bit lacking, and things don't always work as expected.\ AI NAS?! What has become clear to me this year is that we are going to start seeing all kinds of "AI NAS" come to market, and while that might be good for us consumers, be diligent and research these claims. Although the F4-425 Pro technically comes with AI, it is really using a cloud service that is externally sourced off-device through the third party OpenClaw app. My colleague did review a newcomer to the NAS space earlier this year, and it includes a local AI assistant inside the Zettlab D4 NAS, and they do not even use AI in the product name, check out Chris' review here. Where to buy and a discount coupon However, it does not change the fact that this is truly a great entry-level home media-class NAS that you can buy right now. TerraMaster is having a 20% off launch discount, plus you can also still apply our unique 10% off coupon on checkout, which only works on the official website. So here is a breakdown of the pricing that is only valid on the official TerraMaster website. TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = $575.99 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = $503.99 TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = £525.59 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = £460.79 Use NEOWIN coupon code during checkout for 10% discount Over on Amazon US and UK, the F4-425 Pro also gets a 20% launch discount, but here, the above 10% coupon cannot be applied. TerraMaster F4-425 Pro (N350) for $639.99 at Amazon US (was $799.99) TerraMaster F4-425 Pro (N305) for $559.99 at Amazon US (was $699.99) TerraMaster F4-425 Pro (N350) for £583.99 at Amazon UK (was £729.99) TerraMaster F4-425 Pro (N305) for £511.99 at Amazon UK (was £639.99) As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      112
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!