Recommended Posts

Hey I just downloaded foobar2000 cause I saw how great everyone can make it look.

Is there a starting tutorial on how to customise it? Or is it better to trail through all of the threads in this topic.

Thanks.

EDIT:

No worries, I looked through most of the posts. found what I need :) I'm sure there will be many more questions from me in this thread. And can I just say, u guys are pro.

Edited by Twisted Chaz

Really really nice em3! Made my own mod of yours already lol, nothing serious though!

Only problem i have is, it doesn't show the full track title, i looked through the code but couldn't find nothing, any ideas?

Here's mine so far.

foobar07ic5.png

^Maybe there is something wrong with the tagging on your mp3. I've inserted code to cut the text if it's too long (60% of the total trackinfo width) but I don't think that is the issue. I tested a lot to make it work correctly.

Nothing wrong with MP3 tagging, it's all done correctly :( It's really buggin me too! I've tried to change the value of totaltrack info width but no luck :(

Thanks anyways.

Nothing wrong with MP3 tagging, it's all done correctly :( It's really buggin me too! I've tried to change the value of totaltrack info width but no luck :(

Thanks anyways.

Try replacing the beginning of the global code with this. If it doesn't help it's most likely the track trimming that mess up, which I'm rewriting a little as we speak.

// Global
$puts(tracktitle,%artist% - %title%)

Try replacing the beginning of the global code with this. If it doesn't help it's most likely the track trimming that mess up, which I'm rewriting a little as we speak.

// Global
$puts(tracktitle,%artist% - %title%)

No luck i'm affraid :(

^Ok try this. I've rewritten the text trimming code. Replace all // Global code with the code below.

// Global
$puts(tracktitle,
$if($meta_test(artist),%artist%,$substr(%_filename%,1,$sub($strstr(%_filename%, - ),1)))
$if($or($meta_test(artist,title),$strstr(%_filename%, - )), - )
$if($or($meta_test(title),$not($strstr(%_filename%, - ))),
%title%,$substr(%_filename%,$add($strstr(%_filename%, - ),3),$len(%_filename%))))

$puts(freespace,$div($sub(%_width%,38,$calcwidth($get(tracktitle)),$calcwidth(%album%)),2))

$if(%album%,
$ifgreater($get(freespace),14,
$puts(areaWidth1,$add($calcwidth($get(tracktitle)),$get(freespace)))
$puts(areaWidth2,$add($calcwidth(%album%),$get(freespace))),
$puts(areaWidth1,$sub($muldiv(%_width%,60,100),30))
$puts(areaWidth2,$sub($muldiv(%_width%,40,100),10)))
,$puts(areaWidth1,$sub(%_width%,36)))

$puts(charWidth1,$div($calcwidth($get(tracktitle)),$len($get(tracktitle))))
$puts(charWidth2,$div($calcwidth(%album%),$len(%album%)))

Hope you like it.

And now for something completely different :shifty:

Any plans for releasing your Zelda Remix... I'm quite interested ^^

@topic:

minor changes here:

fooplayaaq0.th.jpg

Playlist Dropdown + a few more buttons are above columns playlist, appear on hover!

em3's rating stars btw ;)

^Ok try this. I've rewritten the text trimming code. Replace all // Global code with the code below.

// Global
$puts(tracktitle,
$if($meta_test(artist),%artist%,$substr(%_filename%,1,$sub($strstr(%_filename%, - ),1)))
$if($or($meta_test(artist,title),$strstr(%_filename%, - )), - )
$if($or($meta_test(title),$not($strstr(%_filename%, - ))),
%title%,$substr(%_filename%,$add($strstr(%_filename%, - ),3),$len(%_filename%))))

$puts(freespace,$div($sub(%_width%,38,$calcwidth($get(tracktitle)),$calcwidth(%album%)),2))

$if(%album%,
$ifgreater($get(freespace),14,
$puts(areaWidth1,$add($calcwidth($get(tracktitle)),$get(freespace)))
$puts(areaWidth2,$add($calcwidth(%album%),$get(freespace))),
$puts(areaWidth1,$sub($muldiv(%_width%,60,100),30))
$puts(areaWidth2,$sub($muldiv(%_width%,40,100),10)))
,$puts(areaWidth1,$sub(%_width%,36)))

$puts(charWidth1,$div($calcwidth($get(tracktitle)),$len($get(tracktitle))))
$puts(charWidth2,$div($calcwidth(%album%),$len(%album%)))

Tried it, it's just the same, it seems to be cutting the last word of each track title no matter how long or short the track title is? Apprciate all your hard work though!

Primie.uk

@Primie:

Looks as if it's using ID3v1 tags, they have a maximum length limit..

If your music contains both ID3v1 and v2, try removing the v1 tags.

This may also occur if you have APE tags present (used by replay gain programs, sometimes)

You can change in the foobar preferences whether to use ID3v1 or v2 by default when tagging files (check under the advanced section).

@Primie:

Looks as if it's using ID3v1 tags, they have a maximum length limit..

If your music contains both ID3v1 and v2, try removing the v1 tags.

This may also occur if you have APE tags present (used by replay gain programs, sometimes)

You can change in the foobar preferences whether to use ID3v1 or v2 by default when tagging files (check under the advanced section).

It's already on ID3v2! lol.

Really really nice em3! Made my own mod of yours already lol, nothing serious though!

Only problem i have is, it doesn't show the full track title, i looked through the code but couldn't find nothing, any ideas?

Here's mine so far.

foobar07ic5.png

How do you show the total number of tracks?

em3: Looks great, if I hadn't just set up a config I really liked then I'd switch...

Here's mine, the code is all on hydrogenaudio.

361312042_a5e21e08fe_m.jpg

[Click to enlarge]

Does anyone know how to fix the problem with songtitles overlapping the track length?

If you use

$alignabs(X,Y,w,h,H,V)%title%

text should be cropped correctly

Hope that works!

From foobar wiki:

X & Y

Specify the position of the bounding rectangle (can be a negative value).

(W)idth & (H)eight

Specify the bounding rectangle for the text.

H & V

Specify the alignment as above.

edit: sorry for that big codebox, can't get it smaller....

Really really nice em3! Made my own mod of yours already lol, nothing serious though!

Only problem i have is, it doesn't show the full track title, i looked through the code but couldn't find nothing, any ideas?

Here's mine so far.

foobar07ic5.png

Where can I find that Single ColumnUI config?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Popular Now

  • Posts

    • There really isn't anything magical about the low latency profile, other OS's do this as well. All they're doing is using your CPUs boost clock options in a more smarter way.
    • So we shouldn't have the option because of people using their laptops on battery? OK? LOL
    • If you hear that fans for a limited time the CPU spikes to open a app I don't think the problem is with the software. There shouldn't be enough time spent at the higher clocks to produce enough heat to peak the fans. Maybe it's time to crack those dell laptops open and clean them out?
    • ActivePresenter 10.5.1 by Razvan Serea ActivePresenter is a screen recording, video editing, and eLearning authoring tool with a range variety of powerful features, helping you to capture screen and edit captured videos in a matter of minutes. Create professional screencasts that contain stunning annotations and effects, high-resolution graphics, videos, and voiceovers. You can capture any application on your computer, customize it easily by adding background music, closed caption, zoom-n-pan, etc., and finally export it to popular outputs (video, document) that can run on any device or platform. ActivePresenter allows you to generate the presentations in many different output forms such as image, videos (MP4, MKV, and AVI), HTML SlideShows, HTML5 simulations, and documents. More importantly, ActivePresenter free version provides full access to all video editing features, and you can edit and export videos without time limit, watermarks, or ads. ActivePresenter Free Edition features: Advanced recording features: Full Motion Recording, Smart Capture Video editing: Cut, Crop, Join, Change Volume, Speed Up, Slow Down, Blur Multiple Audio/Video Layers Rich annotations: Shapes, Image, Zoom-n-Pan, Closed Caption, Cursor Path, Audio/Video Overlays Automatic Smart Annotation Export to: MP4, FLV, AVI, WMV, WebM, MKV No Watermark and No Time Limit Clean & Safe: No adware, No Annoying Ads ActivePresenter 10.5.1 fixes: [Import PowerPoint]: Only the first slide is imported from some Canva-generated PowerPoint presentations. [Import PowerPoint]: Some Chinese theme fonts are resolved incorrectly. Embedded YouTube videos cannot generate preview thumbnails in the editor or play in HTML5 preview. [macOS]: Resources could be inserted into the current slide unintentionally when clicking or dragging in the Resources pane. [Publish uPresenter]: "Failed to process the presentation" error sometimes appears when publishing projects to uPresenter. [SCORM]: User responses are not reported to the LMS for Mouse Click and Key Stroke interactions. Custom hotkeys are reset or incorrectly remapped after updating from version 10.1.2 or earlier. Download: ActivePresenter 10.5.1 | 176.0 MB (Free, paid upgrade available) Download: ActivePresenter 10.5.1 for macOS | 227.0 MB Links: ActivePresenter Website | Demos | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      FBSPL earned a badge
      Week One Done
    • One Year In
      Jim Dugan earned a badge
      One Year In
    • One Month Later
      Tommi118 earned a badge
      One Month Later
    • One Month Later
      sjbousquet earned a badge
      One Month Later
    • Week One Done
      sjbousquet earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      69
  • Tell a friend

    Love Neowin? Tell a friend!