Recommended Posts

I've seen enough inconsistency from be.imba (and correlation between W-H, rawr and EJ) to discount it on my blood tank (suggesting resi on shoulder for a dk, lolwhut?) aff lock and protadin to safely discount it. It's immaterial how long the sites have been about, they both became popular in 2008 and have each served a purpose.

Chances are good you're at the def. cap no matter what you use: it's almost impossible not to be over 540 these days.

Ignore the benefit of resilience entirely.

  • Arcanum of the Gladiator has resilience but it also has 30 stamina.
  • Greater inscription of the Pinnacle has 20 dodge rating and 15 defence rating.

In terms of "how big of a hit can I take before I get killed" or "how long can I live without getting healed" the stamina enchant works out to be better.

Rawr is widely considered to be an accurate model of game mechanics and it offers similar advice (stack stamina and armor until your eyes pop out).

Chances are good you're at the def. cap no matter what you use: it's almost impossible not to be over 540 these days.

Ignore the benefit of resilience entirely.

  • Arcanum of the Gladiator has resilience but it also has 30 stamina.
  • Greater inscription of the Pinnacle has 20 dodge rating and 15 defence rating.

In terms of "how big of a hit can I take before I get killed" or "how long can I live without getting healed" the stamina enchant works out to be better.

Rawr is widely considered to be an accurate model of game mechanics and it offers similar advice (stack stamina and armor until your eyes pop out).

Truth. 30 Stm to shoulders is superior than 20 dodge/15 def rating. The only time you should ever use is, if you are a fresh tank still gearing up and may be lacking def rating or your a Warrior/Pally going for a "un-hittable" set and need to stack def.

Note: "Un-hittable" means, if a mob doesn't miss you, you will either dodge, parry or block the attack (Melee only).

Not to derail the conversation, but does anyone remember the name of the mod to change all the text font in the game? I had it during TBC, but can't remember the name to save my life anymore.

Not to derail the conversation, but does anyone remember the name of the mod to change all the text font in the game? I had it during TBC, but can't remember the name to save my life anymore.

There's a number of mods that do that. Just search WoWInterface.com for "font".

I have sharedmedia in my addon folder. This was an addon that would override all the fonts in the game with whatever font you wanted (ie. Adventure, Morpheus, etc.). I found what I used on wowinterface, and it was called ClearFont2. Unfortunately, it's been discontinued. Anything else similar to this that someone knows about?

EDIT: Nevermind. I discovered tekticles and I'm enjoying the new look.

My horrible DK tanked ICC for the first time. Apart from "lol heroics" and a ToC where everyone in the raid but me had ICC-25 gear it was my first real tank experience.

Kinda fun - gives me a different perspective on some of the encounters: hard to get over the healer/DPS instincts and actually stand in front of the boss / not immediately turn and run from OMG damage /etc.

I jumped on my priest for an "alt-friendly ICC10" - we had hard mode putricide to 1% and then the servers stalled for 10 minutes before we got DC'd. Logged back in hoping to see a dead boss only to find ourselves in Dalran without credit. The difference between a "good" guild (ie: my priests) and an "average guild" (ie: my DKs or the people I run my mage with) is night-and day. Killing Festergut with only a single tank transition or getting Lady Deathwhisper with only a single 'pair' of add sides was a new experience: it really trivializes content.

My priest's guild is 5/12 hard modes on 25 man, I'm not sure how they're doing on 10 - probably pretty well if they're dragging me to them on my poorly geared healer.

Truth. 30 Stm to shoulders is superior than 20 dodge/15 def rating. The only time you should ever use is, if you are a fresh tank still gearing up and may be lacking def rating or your a Warrior/Pally going for a "un-hittable" set and need to stack def.

Note: "Un-hittable" means, if a mob doesn't miss you, you will either dodge, parry or block the attack (Melee only).

Actually, for a DK tank the EH from 30 stam doesn't outweigh the 20 dodge/15 def beyond 540 defense, we still get dodge and parry from the defense that's more valuable than the health. Your truth isn't applicable to all. Word ;)

Actually, for a DK tank the EH from 30 stam doesn't outweigh the 20 dodge/15 def beyond 540 defense, we still get dodge and parry from the defense that's more valuable than the health. Your truth isn't applicable to all. Word ;)

Yes it is. EH > avoidance in all encounters. If you believe otherwise, you haven't been a tank for very long and have yet to learn the importance of EH. Suggest you go read and learn some more. Back in vanilla while tanking, the best thing warrior's could do was to make sure they had the highest amount of Health/Armor they could. That trend continued into TBC (with all tanks) and has continued into LK.

I can't remember the exact numbers, since the patch that changed the ratings/formulas for dodge and parry, but roughly 20 Dodge is just over .5% dodge chance and 15 defence rating isn't adding much to either stat. 30 STM trumps both, especially when you add in BoK.

Yes it is. EH > avoidance in all encounters. If you believe otherwise, you haven't been a tank for very long and have yet to learn the importance of EH. Suggest you go read and learn some more. Back in vanilla while tanking, the best thing warrior's could do was to make sure they had the highest amount of Health/Armor they could. That trend continued into TBC (with all tanks) and has continued into LK.

I can't remember the exact numbers, since the patch that changed the ratings/formulas for dodge and parry, but roughly 20 Dodge is just over .5% dodge chance and 15 defence rating isn't adding much to either stat. 30 STM trumps both, especially when you add in BoK.

As you stated in your previous, it helps alot for fresh tanks wanting to close the gap on def cap etc,

but with T9 armor being easier to obtain, the option of which enchant to place becomes a preferred/situational choice.

As you stated in your previous, it helps alot for fresh tanks wanting to close the gap on def cap etc,

but with T9 armor being easier to obtain, the option of which enchant to place becomes a preferred/situational choice.

After you obtain T9 and the other badge gear and the gear from heroics and the lol raids you can do at this point, the only viable enchant is the STM one in terms of greatest improvement to your tank stats. The dodge/def one doesn't stand a chance in hell to come even close to it, unless your building an "un-hittable" set which is only viable for Warrior's/Pallies for Anub alone. (I'm sure you could use it elsewhere, but meh mostly not worth it.)

Yes it is. EH > avoidance in all encounters. If you believe otherwise, you haven't been a tank for very long and have yet to learn the importance of EH. Suggest you go read and learn some more. Back in vanilla while tanking, the best thing warrior's could do was to make sure they had the highest amount of Health/Armor they could. That trend continued into TBC (with all tanks) and has continued into LK.

I can't remember the exact numbers, since the patch that changed the ratings/formulas for dodge and parry, but roughly 20 Dodge is just over .5% dodge chance and 15 defence rating isn't adding much to either stat. 30 STM trumps both, especially when you add in BoK.

Thanks for that, pasted a chunk into the tank channel last night while we were busy wiping pp-hc, caused much amusement :)

Faction hopping real soon here.

Currently: BE Hunter, in icc 10/25 gear on Maelstrom US.

I'll be switching to Alliance on Shattered hand.

I've played my hunter, http://www.wowarmory.com/character-sheet.xml?r=Maelstrom&cn=Dominatious , for almost 100 days /played on horde.. it's going to be really, REALLY weird.

Any race suggestions?

I also have a Druid but I'd like to take him over when he can become a Worgen, :D

Does anyone know if there is a utility that does a ping and/or trace route to all wow realms to help pick a low latency realm (for me)? Or more importantly, avoid high latency realms.

Lowest latency realm I'd assume would be choosing one closest to you. I believe if you do a bit of Googling, you'll be able to find where the servers are located. Did it for you, check here:

http://www.wowwiki.com/US_Realm_List_By_Datacenter

This tool also is supposed to really cut down your latency. Many people have had success with it, including myself. I now sit in the 20s. Easy to remove should you decide you don't like it or if for some reason it doesn't work for you. Won't hurt your system as far as I'm aware.

Faction hopping real soon here.

Currently: BE Hunter, in icc 10/25 gear on Maelstrom US.

I'll be switching to Alliance on Shattered hand.

I've played my hunter, http://www.wowarmory...&cn=Dominatious , for almost 100 days /played on horde.. it's going to be really, REALLY weird.

Any race suggestions?

I also have a Druid but I'd like to take him over when he can become a Worgen, :D

Draenei.

Trojan succesfully hacks Authenticator Protected Accounts

A new virus spawned on the internet a few days ago and seems to be the first trojan capable of hacking a WoW account protected by an Authenticator. It was confirmed by Blizzard a few hours ago.

Quote from: Kropacius (Source)

After looking into this, it has been escalated, but it is a Man in the Middle attack.

http://en.wikipedia.org/wiki/Man-in-the-middle_attack

This is still perpetrated by key loggers, and no method is always 100% secure.

Basically, what the virus does is fairly simple after you're infected :

The next time you log in World of Warcraft, the game asks for your Authenticator code.

The virus intercepts it, send it to another server, and sends a wrong one to Blizzard = You get an error.

The people behind the virus now have a few seconds/minutes to use the "real" code while it's valid to change your password / empty your account / guild bank.

How to check if you're infected

Just search for a file named "emcor.dll" on your computer, it is most likely located in "C:\Users\(Your user name)\AppData\Temp" but I suggest that you check everything just to be sure. If you do find the file, delete it and make sure you update your anti-virus to prevent any further problem.

To be honest, if you found this file your account is probably already compromised.

What does it mean exactly?

Yes, you can get hacked even if you have an authenticator, the chances are MUCH lower but you're not invulnerable.

It definitely isn't an excuse to not have an authenticator. We're talking about a single virus here and the authenticator will save your ass 99% of the time.

Get a decent anti-virus, buy an authenticator, you'll be safe.

Clever *******, are they not? As always, keep your computers clean.

Faction hopping real soon here.

Currently: BE Hunter, in icc 10/25 gear on Maelstrom US.

I'll be switching to Alliance on Shattered hand.

I've played my hunter, http://www.wowarmory...&cn=Dominatious , for almost 100 days /played on horde.. it's going to be really, REALLY weird.

Any race suggestions?

I also have a Druid but I'd like to take him over when he can become a Worgen, :D

Draenei, hands down. 7% hit cap really, really helps hunters.

As far as the druid goes, you'll be waiting a while.

Blizzard said they're not going to allow people to race change to Worgen or Goblins immediately as they want people to see the starting zones and level up their Worgen / Goblins first.

Draenei, hands down. 7% hit cap really, really helps hunters.

As far as the druid goes, you'll be waiting a while.

Blizzard said they're not going to allow people to race change to Worgen or Goblins immediately as they want people to see the starting zones and level up their Worgen / Goblins first.

I strongly disagree this is not the case not so much now, this might have been the case in early wotlk days but now if you can't get +hit capped as a hunter just from gear then you are doing something terribly wrong. There are loltrinkets availbile with like 3% +hit on them. It is pointless to start a draenei hunter hunter as when you raid/party theres a high chance another draenei will be in your party so you get the buff anyways.

I have been as low as 5.80%-6% in Raids and still not missed a single shot blizzard for some reason do not punish hard from being slightly under hit cap. Im sitting at 14.64% in raids im at 15.64% ( i know its totally wrong lol it should'nt be that high but it is ) So a draenei for me would be out of the question. Like i mentioned before if you can not get +hit capped just from gear you are doing something wrong, terribly wrong. (before the elitist start with the EJ best DPS spreasheets have hunters specced into focussed aim well my answer would be thats them, No doubt they have better gear than me, gear that does not have +hit and also they are probably ArP capped too, even if i regemmed to ArP i would still sit about 600 under the cap in my current gear.)

Having checked IanPete armory, he is way above cap. Choosing Draenei would not reap any benefits however if you are a dwarf and you use a gun you will get an extra 1% crit (for free) + stoneform etc, and if you are a Nelf then you get shadowmeld the extra base agility and quickness.

My Armory if you want to look me up, excuse the loltrinkets but im saving up DKP for Deathbringer's Will and pugging ToC25 religously for Death's Vedict.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      592
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!