Apple Mac OS X 10.4.1 for Intel hits piracy sites


Recommended Posts

Thats because the AMD64 distro is 64bit code, whereas the intel one is most likely 32bit, when 64Bit intel chips become more mainstream, expect to see one 64bit distro.

586053223[/snapback]

Yer your right Actually, I never thought of it like that, I looked at the Ubuntu page (where I first spotted this A64 build) and it says basically that what you said..

then could one purchase 10.4 and install it on an Intel PC? (not at default installation, but let's say...modified) - is it likely to work?

586053219[/snapback]

Wait until it ships, it might be reliant on Apple components then (like Open Firmware, and the Boot Rom)

Very interesting read. Also, does anyone know what kind of system specs you need to run Tiger on your PC?

586053245[/snapback]

No official info has been released from Apple, but as far as I know the intel systems running os x at thw wwdc were of pretty pretty high specs, and the CPU itself was over 3.2Ghz. And i'm not even sure they'll officially release a version of Tiger for the intel PC (officially and publically, that is).

Wait until it ships, it might be reliant on Apple components then (like Open Firmware, and the Boot Rom)

586053246[/snapback]

All these restrictions makes things far more difficult (which is the whole point I guess).

x86 Requirements

- Intel Motherboard (specific BIOS and chipset)

- Intel CPU (off the shelf)

- Mac OS X 10.4.1 (Universal Binary Edition)

Then again, we may have to await 10.5 for the official Universal Binary.

Despite us not being able to run this on all of our own regular x86 computers, at least perhaps in the not too distant future we could buy the specific parts and build ourselves a "cheap(er?)" apple system designed for OSX. Apples stance on the purchase of this hardware will probably be quite interesting :p.

Arent the Dev kits being sold 64-bit Intel CPU's. Theres not much point downgrading from the current 64-bit PPC in the G5 to a 32-bit Intel is there? Unless when the machines start shipping 64-bit Intel would be more mainstream.

This will clear up 32-bit & 64-bit questions:

The term x86 is a generic term used throughout this book to refer to the class of microprocessors manufactured by Intel. This book uses the term x86 as a synonym for IA-32 (Intel Architecture 32-bit).

Source: Universal Binary Programming Guidelines

BaLdMoNkEy: That might work, but if the boot-rom has been specifically written for Apple, then it 'might' be difficult to obtain the parts to build. But I'm sure someone will try ;)

Now that makes sense.

Also, S.Jobs announced that ALL Mac OS X builds were designed to run on an Intel chip, this may be a very stupid question, but if that's the case - then could one purchase 10.4 and install it on an Intel PC? (not at default installation, but let's say...modified) - is it likely to work?

I'm not asking for warez information - just a simple yay or nay to this query.

586053219[/snapback]

Okay, well see linux on an amd 64 only is required if you want an 64-bit solution. You can pickup a standard x686 iso that will run both on amd and intel systems. Only thing I think that will happen is that 10.4.1 is gonna be a switch over os basicly a test system in which they manipulate and see how things work out. I think os x 10.5 lepard or w/e will have full x86 binary support meaning it could run on both amd and intel. far as 64 bit support goes who knows if apple will contend to that since microsoft has to have two versions of there os to support it.

side note: Microsoft will be changing this requirement in longhorn for two installs. On the final product you choose between amd 64 and intel off the one disc.

Now that makes sense.

Also, S.Jobs announced that ALL Mac OS X builds were designed to run on an Intel chip, this may be a very stupid question, but if that's the case - then could one purchase 10.4 and install it on an Intel PC? (not at default installation, but let's say...modified) - is it likely to work?

I'm not asking for warez information - just a simple yay or nay to this query.

586053219[/snapback]

Erk, the 64Bit tech that is in the P4 is the same as the Athlon, Intel reverse-engineered the AMD64 platform so their chips could run Windows XP 64Bit.

It's too early to get leaked unless Steve Jobs leaked it. :lol:

586053362[/snapback]

That's what people said about Tiger (The final Gold Master) it was leaked about 2 weeks(?) before release and about 4 weeks before it even made it to the ADC website.

How did that get leaked? .. who knows but its very possible its happened the same way maybe even the same person, that is if its been leaked at all.

I have a question:

Its been in the news for the past couple weeks that Apple has switched over to intel archecture. Does this mean that you will be able to choose between Windows and MacOS when you configure your dell PC in the future? Was this Apples whole plan now?

They should just compile it with ICC, then at least it won't work on non Apple/Intel computers...?

586053386[/snapback]

From what I've read, the ICC generates very good code for athlons. Somehow, I don't think this was planned. :p

Anywho, If it was leaked, I think it'll be good for apple. For one thing, it'll get more people to try it out and more developers porting to it. Then in June next year when the new macs come out, people will buy the new macs to run OSX. They probably won't be able to run OSX on their existing computer since it'll probably rely on a Mac-specific BIOS.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!