[Shell Patcher] Tango Icons for Windows


Recommended Posts

lol who says its first ?

Who says Trillian is bloatware?

Who says either are even on the list?

For that matter, who says there's even a list?

Damn, this topic is better than the Jokes Board :p

Trillian is, in my opinion, a great multi-client IM app that requires very little setup and can be used immediately out of the box. Miranda is good but requires a bit of knowledge and stuff to get it up and running and sometimes can be very confusing. However, I've tried skinning Trillian with Tango icons and it's not impossible but very VERY tedious and difficult. Miranda is much easier to skin with Tango icons, I believe.

Anyhow, that's jut my 23 cents ;)

lol nice quoting super really captures that point pretty funny, made me laugh :)

im just kidding with tirllian, though I would never go near trillian unless I was going to give it to grandma

better then most of the crap thats in the software sea, most definetly AIM

Probably the best/easiest/only way to work it would be to take a skin that matches your WM theme, grab copies of the icons, and start hacking away bits of skin with old icons, and copypaste the Tango stuff in place. I think the protocol icons may be managed seperately, or at least skinnable seperate from the main skin, but I don't remember - it's been 2-3 years since I stopped pirating Trillian Pro in favor of Gaim :shiftyninja:

Probably the best/easiest/only way to work it would be to take a skin that matches your WM theme, grab copies of the icons, and start hacking away bits of skin with old icons, and copypaste the Tango stuff in place. I think the protocol icons may be managed seperately, or at least skinnable seperate from the main skin, but I don't remember - it's been 2-3 years since I stopped pirating Trillian Pro in favor of Gaim :shiftyninja:

The images are all over the place. SOme exist in the actual trillian.exe, some are in the images folder and so on and so forth. If there is a folder for Trillian it'll have images from some part of the app in it. It's extremely difficult to change those icons and I believe Cerulean studios made it that way for a reason, those evil dudes. I'm still peeved that they haven't given the tiniest bit of info on how Astra is coming along. I too have moved to GAIM now. I'm mainly on Linux now anyway if the damn thing will actual work properly for more than a minute.

The images are all over the place. SOme exist in the actual trillian.exe, some are in the images folder and so on and so forth. If there is a folder for Trillian it'll have images from some part of the app in it. It's extremely difficult to change those icons and I believe Cerulean studios made it that way for a reason, those evil dudes. I'm still peeved that they haven't given the tiniest bit of info on how Astra is coming along. I too have moved to GAIM now. I'm mainly on Linux now anyway if the damn thing will actual work properly for more than a minute.
Yeah, considering the anti-piracy checks, and the auto-update abilities, it probably downloads a new version of itself - but that's only an issue if you're trying to hack the images in the binaries themselves. Making a skin for Trillian is the reverse - you'll be spending all day hacking XML and images, but to get and replace them all you have to do is unzip.

Are you using 1.5.0? You've got to be using 2.0beta3.1 or newer (2.0beta5 is out); MSN changed something and it broke older versions of Gaim.

That would do it. I have 1.5.0. I just downloaded the first thing I could find :rolleyes:

I'll get 2.0b3.1

My iColorFolder skins for Industrial and Gnome are up on my BobP's site. I can't call their inclusion in the patcher done without 'em, although that's not really of much use to anyone else without this month's patcher revision. No, it's not out yet :rofl:

That would do it. I have 1.5.0. I just downloaded the first thing I could find :rolleyes:

I'll get 2.0b3.1

... and not 2.0b5? Edited by vertigosity

My iColorFolder skins for Industrial and Gnome are up on my BobP's site. I can't call their inclusion in the patcher done without 'em, although that's not really of much use to anyone else without this month's patcher revision. No, it's not out yet :rofl:... and not 2.0b5?

It's out! I've been waiting for 2.0b5. Downloading now.

Can't wait for the November release of Tango!

On a side note, I made some of my own modifications to the iColorFolder Tango thingy... so that not only are plain folder colors selectable, but also a bunch of blue emblemated folders created/modified by me. (Some of the same ones I released earlier as icons.)

My iColorFolder skins for Industrial and Gnome are up on my BobP's site. I can't call their inclusion in the patcher done without 'em, although that's not really of much use to anyone else without this month's patcher revision. No, it's not out yet :rofl:... and not 2.0b5?

lol, yeah, I'll get 2.0b5. For some reason I just read "2.0b3.1" and didn't see what you had in parentheses there.

The November revision is out. It's only up on tango.benpbrown.com right now, as DeviantArt seems to have broken their file submission system, and I still need to get around to picking a new host for darkt.net (I'm lazy, I know).

Changes: Adds Gnome-icon-theme2 and NLD10 Industrial as base icon themes; minor resources changes otherwise. Patcher code (installer only) has been extended to allow for user-supplied custom resources, and command-line selection of icon theme for silent operation (see FAQ for more information).

Barring anything terribly new and interesting from the upstream developers, this will probably be the last major revision to the patcher. I'm still working on my card set, but it needed some major revisioning from that concept shot earlier and it's not done yet; but when it is, there'll be a revision for it. I'm not buying two copies of Vista Ultimate (I'd need to, to get some of the functionality I have out of XP right now), so for those of you hoping for me to announce a Vista version, you may now be disappointed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!