-
Posts
-
By Som · Posted
My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. -
By hellowalkman · Posted
Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state. -
By Nick H. · Posted
Bugger, you beat me to it! -
By +Good Bot, Bad Bot · Posted
I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times. -
By TheGhostPhantom · Posted
So how did you solve the problem? Disabling Secure Boot isn’t a solution.
-
-
Recent Achievements
-
Leroy Jethro Gibbs earned a badge
One Month Later
-
flexorcist earned a badge
Conversation Starter
-
AndreaB earned a badge
One Month Later
-
agatameier earned a badge
One Month Later
-
agatameier earned a badge
Week One Done
-
-
Popular Contributors
-
Tell a friend
.thumb.png.b7089ebbdf00d96b3b92dddbd04bac02.png)
Question
Marshalus Veteran
Third time is a charm eh folks? I've got the funding, I've got the people, now I just need the logo!
HostFalcon.com, an internet service provider specializing in small business site hosting, has commissioned a contest to create a new and unique branding for their soon be opened business.
The winning logo will help set the tone for the layout, color and theme for the rest of the company web presence.
The contest will run for an undetermined length of time and participants from around the Internet community are encouraged to enter.
First prize is $40 AND 6 months of free hosting on a basic HostFalcon plan. Two runners up will receive 25% off any plan for three months.
Winners will be decided exclusively by the management of HostFalcon.
Requirements
The name of the company (HostFalcon) should be present on any logo design along with our slogan (Set your sites higher) if deemed feasible by the designer.
The branding elements should be on a white background and be easily applied to any white or light gray without recoloring. Any text used should be a sans-serif font. HostFalcon prefers the use of a simple and minimalist design.
Only Photoshop importable formats will be accepted.
Uses
The winning branding will be used on our website, in online and possible print advertisements, letter headers, company shirts, business cards, etc.
Exclusive rights must be provided to us by the author.
Good luck!
NeoRequest: http://neorequest.tekngn.net/GraphicRequestView.aspx?ID=871
Additional Information
The following issues have come up through the thread.
- A cash prize has been added.
- You can submit as many variations or alternative designs as you wish.
- Please keep the negitive comments on other peoples work to yourself.
- Please do not ask for public feedback from me on your submission.
APRIL 3 UPDATE: The entry process is now closed. Unless you come up with something breathtaking we're going to use what we've taken so far and make a choice from there. We have narrowed the field down to about 5 logos that stand out from the rest as being the type of branding we'd be able to use and would help set us apart a bit from our competitors.
I have no timeline on getting a winner announced. Of course I'll let everyone know when that happens.
Thanks everyone for the great submissions, you've made it really hard for the judges to choose a winner.
Edited by MarshalusLink to comment
https://www.neowin.net/forum/topic/445898-competition-logo-needed-for-hosting-company/Share on other sites
225 answers to this question
Recommended Posts