The Official NDS Homebrew Thread


Recommended Posts

I use WEP with 64bit encryption and it works. Try configuring a static IP and make sure the online settings work with an actual game. I think most homebrew use the Wifi settings on slot 1 so that is what you should configure.

If it doesn't work find your router in the Nintendo Wifi site and see if you need to change any settings: http://www.nintendowifi.com/consumerservice/routerSetup.do

DSAIM 0.01e has been released:

Alright,

I'm satisfied with this enough to make the first release. Make sure you read the instructions!

This version is still very limited. I've only tested it with my linksys router, and a few AIM usernames. I hope that you are able to log in. We'll see.

Anyway, let me know if it works.

http://www.ryankegel.com/download.php?dsaim=1

Thanks for the support!

-Ryan

I haven't tried it as I don't use AIM, but it seems to work great. Some people are reporting that thier contacts names don't show up, but over all it seems to work very well for an initial release.

For those of you who own or intend on buying an EZFlash cart, their official English forums are here: http://ezflash.sosuke.com/

Ji@nBing, could you stick that link in the OP? :)

Done ;)

Here are a few more pics of the SC Lite:

18pt7.jpg

19uc9.jpg

14ng5.jpg

15mh8.jpg

DSAIM 0.01e has been released:

I haven't tried it as I don't use AIM, but it seems to work great. Some people are reporting that thier contacts names don't show up, but over all it seems to work very well for an initial release.

I just tried it. Works great!

Still doesn't work with WEP on tho.. Just like MSN.

A few pics of the M3 Lite have been released (M3 Lite is due out August.15th BTW). Personally I like the looks of the SC Lite because it loads from the front. With the M3 Lite, you will have to take it out of the DS every time you want to remove and put back in the MicroSD card.

610124c08ade969008058ai2.jpg

61012424b4e29cccec4c6am2.jpg

610124809961041773bf4ie1.jpg

610124fbc0e4d48d481b9zk8.jpg

I'm sure it's photoshopped, you shouldn't be able to read the text on the MicroSD card, the card reader should be covering most of it. Someone on another forum reckons they're just photoshopped G6 carts.

Plus, you see that circle (presumably the battery)? It's visible through the MicroSD card. I don't think I'll trust any pictures of the Lite version of the M3 until I see a video of it going into a DSL and running.

I forgot to mention, I've entered my guide at the 1st post in the competition on the Unofficial Supercard Forums (1st prize is a brand new DS Lite :) ). Voting starts I believe Monday. Anyone who wants to register there and vote for me, I would appreciate it. In the end it's the admins who decide who wins, but they will take # of votes into account. I don't really need another Lite, but I wrote this guide for you guys here, and I may as well win something for it if I can :p . My user name is Madrigal BTW.

My thread.

The contest folder.

I forgot to mention, I've entered my guide at the 1st post in the competition on the Unofficial Supercard Forums (1st prize is a brand new DS Lite :) ). Voting starts I believe Monday. Anyone who wants to register there and vote for me, I would appreciate it. In the end it's the admins who decide who wins, but they will take # of votes into account. I don't really need another Lite, but I wrote this guide for you guys here, and I may as well win something for it if I can :p . My user name is Madrigal BTW.

My thread.

The contest folder.

I hope you win. :yes:

I just found out that the SC doesn't support download play :(

I wanted to try Band Brothers (as well as other download play games) with my friends, but it didn't work, because their DS's just freeze at the Nintendo logo white screen after downloading from my DS.

Is there a way to fix this or is multi-card the only way to play multiplayers?

I just found out that the SC doesn't support download play :(

I wanted to try Band Brothers (as well as other download play games) with my friends, but it didn't work, because their DS's just freeze at the Nintendo logo white screen after downloading from my DS.

Is there a way to fix this or is multi-card the only way to play multiplayers?

it's not that SC doesn't support it. it's the key. basically you're not using an original game cartridge, but a passme device. hence, the other DS must be using a passme device too. otherwise it just won't work.

so it kinda goes like:

original -> original = OK

original -> passme = OK

passme -> passme = OK

passme -> original = FAIL

get it? :)

Do you mean the Lite one (the new one) or the older, Supercard SD version (the purple-ish one)?

None of the Supercards have the hardware required to make a GBA game run correctly, namely having enough RAM. That's why the M3 Pro line is cheaper, it also forgoes GBA support.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • One Drive should be a four letter word. First thing I disable on my computer. If I want to upload something to the cloud, I use a cloud base storage, NOT microsoft. Oh but what about backup. I have done backups since floppy disk eras...it just comes naturally.
    • It does just not OneCloud. 🤷🏻‍♂️
    • Claude Desktop on Linux doesn’t have ram issues. Strange. 🤷🏻‍♂️
    • FWIW this whole 'universal printer driver' challenge has been around since the 1990's! Back in the day it was ADOBE that held the mantle via their portable document format (PDF) which provided the most fidelity between your-layout and your-printer's-capabilities. By the 2000s, Microsoft went with XML-defined formats -- namely XPS. Alongside the [possibly transient] format, and combined with USB standards, the document driver models were evolving. A new generation of hardware adopting different/outdated security models prevented Microsoft from 'forcing' the industry to utilize a single 'Universal' printer driver. Every major OS generation (and obsolescence of older hardware/vendors) moved the needle further along... until 3D Printers (esp. by mid-2010s) changed the maths again! While standard documents had attained sufficient compatibility across OS + printer scenarios (and the slow death of Fax support), there were two major shakers to the hopeful calm: open 3d model formats, and subscription-based printer resourcing (HP and Epson are mostly guilty here). With a sense of calm in the printing industries (whatever is left), there's hope for another push for standardized printer hardware drivers... until another printer hardware trend wrecks havoc and custom drivers become requirements...
    • Can you tell me what the difference between the Moto G and the Moto G Stylus is? They look similar. 
  • Recent Achievements

    • One Month Later
      Sopa flores earned a badge
      One Month Later
    • First Post
      StaticMatrix earned a badge
      First Post
    • Week One Done
      StaticMatrix earned a badge
      Week One Done
    • Rookie
      lamborghiniv10 went up a rank
      Rookie
    • One Month Later
      pinnclepd earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      PsYcHoKiLLa
      208
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      96
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!