The Official NDS Homebrew Thread


Recommended Posts

It's 512MegaBYTES...

And trust me, depending on the game, you would be lucky to get more than 8 or 9 games on there...I have a 1GB microSD card in my SCLite and I can only hold about 17 games, so divide that in half for you...plus a lot of games are about 64MB each.

Well i have 7 nds backups on my 256 MB (2 gbit) :p G6 card. The average file is 32.7 MB (~64 mbit). 7*4 = ~ 28 games.

So 7*2 = 14 games to me.

Well i have 7 nds backups on my 256 MB (2 gbit) :p G6 card. The average file is 32.7 MB (~64 mbit). 7*4 = ~ 28 games.

So 7*2 = 14 games to me.

Average game is not 32MB...I have atleast 6 or 7 games that are 64MB in size (Tony Hawk, Metroid, Sonic, Mario and Luigi, Phoenix Wright, Kirby's Canvas, etc...). I don't think there is any particular size to generalize them all.

Average game is not 32MB...I have atleast 6 or 7 games that are 64MB in size (Tony Hawk, Metroid, Sonic, Mario and Luigi, Phoenix Wright, Kirby's Canvas, etc...). I don't think there is any particular size to generalize them all.

My average file size. Some games are small and some are big, but the average is 32MB :alien: .

Hey, anyone know why I can't play action games on my supercard SD like Bleach DS or Guilty Gear.

I got pass the character selection screen on Bleach and then the game would just hang.

For Guilty Gear, I can't play with some character or the game would hang.

Here is my setting chosen in supercard software: Saver patch, Faster play time and trim.

Thanks for your help,

Hey, anyone know why I can't play action games on my supercard SD like Bleach DS or Guilty Gear.

I got pass the character selection screen on Bleach and then the game would just hang.

For Guilty Gear, I can't play with some character or the game would hang.

Here is my setting chosen in supercard software: Saver patch, Faster play time and trim.

Thanks for your help,

Turn off trim. In some cases it removes files needed for the game to run properly.
Ok, I turn off trim but still get the same problem.

BTW, What is "faster playing time" and when should I turn it on.

The new supercard software also has a new setting:

"enable patch access..."

What does it do?

Thanks,

Select enable restart and faster play game only. Saver patch and rom position patch should both be set to SD card.
I selected the option like you said (saver patch, faster game play and enable restart) but I still have some random freezes in game.

Please help,

What brand/speed SD card are you using? Also, it could be a bad dump of the "backup". I would try a copy from somewhere else.

I have PQI SD

Speed is 150x or 23MB/s

About the back-up, I have tried copy from 2 different places but still gets same issue.

PS:In the latest try, I disabled "faster running time" and "enable restart", leaving only saver patch. The game works fine with less freeze than when I leave those on but it still freeze sometimes especially when the action begins.

I selected the option like you said (saver patch, faster game play and enable restart) but I still have some random freezes in game.

Please help,

same here dude... sometimes i can play for 5 hours straight, and other times it just freezes after 2 minutes... also noticed that the freezing occurs when loading new content like battle mode in m&l:pit, the victory round in mariokart, new areas in phoenix wright, level loading in meteos...

i already asked around and most think it's the sd card that's causing the trouble... i already tried pushing down the connector pins of the reader to ensure they make contact, but still no luck... i have a 1gb minisd by dane-elec, i think i'm gonna get me a small sandisk to see of it solves the problem...

best of luck anyways :)

the instructions sent to me by supercard store were to put nitro tracker onto the sd card, sd into supercard and supercard / superkey into ds then power on, how long should i be waiting for menu to come up?

it's doing something different because the safety bit doesn't hang around

well, bought a sandisk 256mb minisd to see of it also hangs... been playing phoenix wright for like 3 hrs now, and it 'crashed' only twice... gonna try some different games later... if they also hang than i guess it's the SC thats busted... gives me an excuse to get a SCLite :)

Don't really know, think it's a test app along the lines of, if you can see this in the list of programs and load it, you've done it right. The problem I had was that I'd forgotten to put the boot thingy on the SD card so yeh.

Now I need to find something that plays more media types than just .mp3 supported by Moonshell... DS organise looks good.

Dear god I need to work out whats wrong with my card reader, having to use camera to read/write to sd which is so slow compared to my reader thing.

so i got myself a sandisk 256mb for testing my SC problems... first thing i noticed is that the games load way faster than the other card i was using!! i can also play again, but it still crashes sometimes... one time i can play for like 3-4 hrs straight, other times i get 5 crashes in 10 minutes or so...

i'm really considering to get a SC lite with a high qual sandisk microSD now... only thing holding me back is the amount of money i'll need to spend and have spent already... i mean, SCMini -> 50?, crap 1Gb SD -> 100?, sandisk 256mb ->22?...

i wish i had some guarantee that the SCLite and the sandisk would really be that last things i'll have to get... i dont wanna spend another sum of money just to find out after a month that the lite is bugged or the sd is crap...

anyone know if i could make some sort of traed with kicktrading, like say "i'll send you my more or less perfectly good SCMini and get 20$ off for a scLite?&:pot; :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMAZON needs to take total accountability for this.
    • Server Summit had a heap of announcements, ADCS changes are baller.
    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!