The Official NDS Homebrew Thread


Recommended Posts

Try selling your current Supercard on eBay, you should get a decent price, I'd imagine. Also, you paid ?100 for a 1gb SD card? You got ripped off badly, my 1gb MicroSD card cost me AUS$65, which is less than ?40, and MicroSDs are substantially more expensive than SDs.

Somebody gave me a 32MB microsd for free so I went ahead and bought a SC Lite. It should be here later this week. I'll be getting a 2GB microsd once they go down a bit. 32MB should be enough for testing.

LMAO.

games are 16,32 or 64mb. your 32mb will format to about 30.5mb usable, so you will only be able to test a 16mb game!

i bought my 1gb micro sd 1 week ago for ?23 delivered. bought a 512mb mini sd for ?7.50 delivered too. both from a hong kong seller on ebay.

LMAO.

games are 16,32 or 64mb. your 32mb will format to about 30.5mb usable, so you will only be able to test a 16mb game!

i bought my 1gb micro sd 1 week ago for ?23 delivered. bought a 512mb mini sd for ?7.50 delivered too. both from a hong kong seller on ebay.

I know that's why I said it was for testing:pinch:h: Right now I have a 2GB MiniSD + M3. That is why I don't want to buy a 1GB micro now. All the stuff will not fit. Right now all I am playing is Tetris so 32MB is more than enoug;);)

Just letting you guys know the M3 Lite is due out tomorrow and the 25th (depends on the place). Realhotstuff currently has it for pre-order for $78.99USD and kicktrading will have it on sale on the 25th.

I've heard nothing but great things about realhotstuff, but I'm personally waiting for kicktrading because I've always had great dealings with them and the one time I didn't deal with them I got screwed (by Divineo) :pinch: .

There are also a few new apps and uptades to current ones that I will be adding to the first post when I get some time in the next few days.

Edited by Ji@nBing

Just letting you guys know the M3 Lite is due out tomorrow and the 25th (depends on the place). Realhotstuff currently has it for pre-order for $78.99USD and kicktrading will have it on sale on the 25th.

I've heard nothing but great things about realhotstuff, but I'm personally waiting for kicktrading because I've always had great dealings with them and the one time I didn't deal with them I got screwed (by Divineo) :pinch: .

There are also a few new apps and uptades to current ones that I will be adding to the first post when I get some time in the next few days.

I can vouch for RealHotStuff.com...they are fast, cheap, and in America! Also, they are a sponsor of the Supercard and the owner of the site is on their forum daily helping out people. He also responds via PM and email very quickly!

you're aliiiivvveeeeee!!!!!!!!!!!!!!!!!!!!! :D

anyway, how's compatibility for that m3? since my SCMini is kinda busted i'm looking for a replacement... i need it small, lotta storage, and working with moonshell and stuff... don't really care much about gba but soundvoyager without slowdowns would be nice :)

Im going to buy a DS Lite soon, perhaps with Mario Kart but thats another story.. I need to know how to run homebrew on a DS Lite, and what PassMe or whatever card I should buy. I've heard people ranting about a new M3 coming out, whats this? And what about the DS-Xtreme coming out soon, which seems to make this whole process easier. Thanks.

I'd like people from the UK to recommend some sites they bought off too! :) Cheers

check the first page in this topic as it'll probably hold all info you'll ever need ;)

basically you need

1. ds slot: something to "bypass nds native firmware" -> superpass, superkey etc...

2. gba slot: something to hold the data you want to use (roms, apps, movs, mp3,...) -> supercard, m3, g6,...

there are a lot of variations on both components so you can choose and combine in alot of different ways :)

dsxtreme is a new generation of devices which combines the above mentioned components in 1 device, meaning your ds slot is used for bypassing as well as data loading...

happy hunting :)

get your ds flashed ?8 from: www.cheapmods.net (uk site)

get a supercard lite ?36.50 from there too.

get a 512/1gb/2gb micro sd card from ebay. 1gb is ?23 delivered from hong kong.

i have bought a supercard lite and had a ds pink and a ds lite white flashed from cheapmods.net. you can choose recorded delivery or special etc. ?1.30 ish for recorded.

thats all you n:)d :)

I know that there are some negative reports reported about the EZ4 flash. Well, I just ordered an EZ-Flash 4 lite and an EZ-Pass 3 from Kick Trading. I got a pretty cheap 256MB microSD card to use for now (eventually I'll go 1gig, but for now 256 is big enough as I only plan on using it for games, not movies, music, etc.). Since this setup has recieved some negative criticism I'll post my own humble review of the setup. This will be my first attempt at the homebrew/hacking scene for the DS, although I have done cell phone hacking before and am technically knowledgable. Look for my review late next week.

I know that there are some negative reports reported about the EZ4 flash. Well, I just ordered an EZ-Flash 4 lite and an EZ-Pass 3 from Kick Trading. I got a pretty cheap 256MB microSD card to use for now (eventually I'll go 1gig, but for now 256 is big enough as I only plan on using it for games, not movies, music, etc.). Since this setup has recieved some negative criticism I'll post my own humble review of the setup. This will be my first attempt at the homebrew/hacking scene for the DS, although I have done cell phone hacking before and am technically knowledgable. Look for my review late next week.

I use the EZ-Flash IV Lite, and really, the only problem is it's homebrew compatiblity. It's the best out there for GBA games, and definitely close to the top with DS games. You'll want more than 256mb though. FF3 alone is 128mb.

I thought everyone would be interested to know that the 1gig sd card on amazon is now only $14.50!! http://www.amazon.com/gp/product/B0001A06G...6516151?ie=UTF8

C'mon M3 lite!

Unfortunately the M3 lite uses MicroSD cards. A fair bit more expensive than normal SD.

Edited by DomG

m3l_hkcc_1.jpg

m3l_hkcc_2.jpg

m3l_hkcc_10-1.jpg

More pictures of the M3 Lite can be found HERE Also unless im mistaken, the M3 Lite is set to sell for 398元 (that character should be encoded as yuan, chinese currency) so if thats correct over there you can pick it up for around $65AUD ($50USD) only about $15 more than the SCL price over there so heres hoping in HK the prices are similar because i'll be picking up the M3 Lite in a HK a few days after it is released. Hell $50USD is much nicer than $80. I know its crazy but i actually like the side loading SD Micro slot besides the content of the 1gb card i'm not planing on changing all that often. :)

I use the EZ-Flash IV Lite, and really, the only problem is it's homebrew compatiblity. It's the best out there for GBA games, and definitely close to the top with DS games. You'll want more than 256mb though. FF3 alone is 128mb.

Unfortunately the M3 lite uses MicroSD cards. A fair bit more expensive than normal SD.

Well, I definately plan on playing FF3, but if I'm going to be playing FF3 I'll be pretty sucked into it and won't be needing much else on the cart. I'll get a 1gig card soon enough.

M3 Lite looks really good... I will have to rethink on the SC Lite.

Which passme device(?) (passcard 3 or superkey) would anyone recommend with the new M3 Lite?

I know that the passcard has a boot up logo whereas the superkey doesnt. Will there be any compatibility issues using different brands with each other?

M3 Lite looks really good... I will have to rethink on the SC Lite.

Which passme device(?) (passcard 3 or superkey) would anyone recommend with the new M3 Lite?

I know that the passcard has a boot up logo whereas the superkey doesnt. Will there be any compatibility issues using different brands with each other?

Both will work fine with the M3. The newer Superkeys have a splash screen now as well. If you are going with an M3, I would go for the Passcard 3 just to assure complete compatibility (even though they are exactly the same and made in the same factory).

Bricking and Saving questions:

1:

I read on comparisions between flashing the DS and simply using a passkey that you can brick your DS using either method.

I understand that Flashme has a security feature that, once correctly in place, can allow you to re-flash your DS in case your firmware gets messed up. I can understand how you could brick your DS in the process of putting the Flashme firmware on the DS in the first place, so I can see why that is handy.

But I also read that if you don't use Flashme and just use the passkey that you run the risk of permanently bricking your DS because you don't have that security feature that the Flashme provides. My question is this: what would you do that that would cause your firmware to get corrupted or overwritten if you never flashed the firmware to start with? Does the simple task of using a passkey device risk deleting your firmware? This rationale doesn't seem to make sense to me as a con of not flashing your DS.

Can anyone clarify?

2:

I've been reading on the EZ4 and have ordered one (the lite model), but I'm not sure I understand one thing, and that is saved NDS games.

The thing that throws me for a loop is the whole mention of the saves being stored in the EZ4 memory first, then being stored on the SD card when it is rebooted. Does this mean that I need to re-boot the DS before the save actually sticks? I'm just not sure what this is all about.

I do understand that I need to make the .sav file myself and put it on the SD card. I'm assuming that this can be a 0byte file at first. Is that correct? In otherwords, I make a new "plaintext" file on my PC and rename it gamename.sav and move it over to the proper folder in the EZ4, correct?

Edit: I just noticed that newest versions of the EZ4 client automatically make the .sav file, so I shouldn't need to do anything.

Assuming that I have the creation of the .sav file understood, can someone shed some light on the whole "rebooting" issue? Is that something that I really will never notice or do I need to do something conciously in order to make my save game stick to the .sav file on the SD card? What about for GBA games?

(these questions cross posted to GBAtemp)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      546
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      ATLien_0
      64
  • Tell a friend

    Love Neowin? Tell a friend!