Recommended Posts

Is anyone able to move more than 1 file up and down in the now playing list. I can't move a group. Is this an isolated case?

You know? I just realised that :| ! I can't move multiple files even if the black line was there when I moved it.

PSG22

URGE did something today that no other service has done for me in the past. I formatted my computer eariler today and reinstalled URGE and it detected my computer as the same system. I did not have to redownload anything (I had all of my albums on a seperate drive) nor did it have to acquire any licenses, since it knew my computer was the same setup.

When using services like Napster in the past, after every format I would have to redownload all of my songs for them to work and then have to remove my "old" system to make room for my "new" one.

Hopefully it will stay like that after it hits final.

Does anyone know how to replicate this view: http://www.winsupersite.com/images/reviews...1_review_06.jpg

When I click on album it seems to get grouped and separated by letter (see attachment).

yeah i want to know how to do that too! tbh i dont think you can in this build but i really hope you can in the final, it will really annoying if you cant , the whole A B C thing is just a waste of space.

is it just me that get really bad lag on the energy bliss visulization? i only get it when a tooltip pop ups though if i leave it, then it runs fine. so is it just me?

yeah i want to know how to do that too! tbh i dont think you can in this build but i really hope you can in the final, it will really annoying if you cant , the whole A B C thing is just a waste of space.

is it just me that get really bad lag on the energy bliss visulization? i only get it when a tooltip pop ups though if i leave it, then it runs fine. so is it just me?

It seems that with a small library (no more than about 20 albums) it uses the single continuous list - however once your library of albums goes past that point it starts dividing them by letter.

  • 2 months later...

beta 2 seems to work alright :) but i have a question thats been in my mind for ages, what is the "High Quality Mode" option, and whats the difference from using overlays? the only thing i notice when using that mode is some videos appear b&w or pinky. the help file doesn't have anything about it (not that i can find)??

I have a problem after i installed WMP 11 Beta 2.

Before: I would double click on a song and it would play, and if i double clicked another song after that, it would add it to the Now playing Music Queue.

Now: Whenever a song is playing, it doesn't add to queue, it automatically stops the current song playing, and plays the song selected.

Anyone know any plug ins or settings i need to change?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you still click his nose in the about box?
    • In that case this product has no value to me. I'd rather use older Creative SB that were better in my opinion or onboard audio chip.
    • FxSound 1.2.9.0 / 1.2.10.0 Beta by Razvan Serea FxSound (formerly DFX Audio Enhancer / FxSound Enhancer) is now free, making high-quality audio enhancement accessible to everyone. Designed for all PC sound systems, from average setups to audiophile-grade equipment, it offers automatic or fully customizable processing. As automatic or customizable as you want, it utilizes the highest-grade processing to deliver more volume, better equalization, and a wider, deeper sound. For the serious audiophiles, FxSound gives you the tools to adjust the FxSound Effects and EQ to your exact preferences. Turn FxSound on and immediately hear the difference in sound quality. FxSound is ideal for budget audiophiles, music lovers, gamers, transcriptionists, Netflix enthusiasts, and more. It’s particularly beneficial for those relying on quiet laptop speakers or low-quality audio hardware. As a free tool, FxSound excels in boosting volume, enhancing bass, and improving sound quality. No other free EQ for Windows matches its ease of use. FxSound Is Now Completely Free and Unrestricted FxSound Pro is now free for everyone, not just those who can afford it. Get free and unrestricted access to better sound today. FxSound is now entirely supported by users. Click here to donate to help fund continued development and improvements to FxSound. FxSound 1.2.9.0 changelog: Auto save preset when Equalizer or Effects settings are changed Reset to factory defaults can reset the unsaved preset changes Settings dialog UI improvements for Audio and Equalizer sections Output device list is now displayed in the device preference order Preset is selected immediately when the preset for an active output device changes from settings Fixes and improvements in preferred output device selection Fixed crash issue #487 Fixed preset not getting applied and EQ flat after update (#403 and #472) Fixed system audio device not being restored on reboot (#483) Fixed preset export and import dialogs not shown when always on top is enabled Fixed audio not being restored on exit after the preset save dialog Fixed FxSound on/off handling on Windows session changes FxSound 1.2.10.0 Beta changelog: Command line options can now be applied to an already running instance of FxSound Command line option added to launch FxSound minimized to the system tray Fixed output device not being changed through hotkeys when FxSound is off (#524) Individual hotkeys can now be disabled with Delete key (#515) Fixed the but to prevent invalid hotkeys from being registered (#523) Bluetooth devices removed from device settings are removed from device preference list Fixed device detection failures Fixed application hang when retrieving the audio mix format fails Fixed presets import dialog file name combo box text alignment Fixed output device not being applied through command line Fixed a delay blocking application load when minimizing to the system tray Fixed EQ band sliders not refreshing when switching number of bands (#521) Fixed user-set mute being overridden by FxSound Fixed icon visibility in ARM64 version Finnish language support added Corrected Persian translations Download: FxSound 1.2.9.0 | ARM64 | ~70.0 MB (Open Source) Download: FxSound 1.2.10.0 Beta | ARM64 View: FxSound Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • mIRC 7.84 Final by Razvan Serea mIRC is a full featured Internet Relay Chat client for Windows that can be used to communicate, share, play or work with others on IRC networks around the world, either in multi-user group conferences or in one-to-one private discussions. It has a clean, practical interface that is highly configurable and supports features such as buddy lists, file transfers, multi-server connections, SSL encryption, proxy support, UTF-8 display, customizable sounds, spoken messages, tray notifications, message logging, and more. mIRC also has a powerful scripting language that can be used both to automate mIRC and to create applications that perform a wide range of functions from network communications to playing games. mIRC has been in development for over a decade and is constantly being improved and updated with new technologies. mIRC 7.84 changelog: Added custom dialog editbox option 'optional' for grayed out optional text. Fixed DirectShow temporary wave file not being deleted on exit. Changed $urlget() to retry a connection without compression in the event of an error. Updated code signing certificate to use Azure Artifact Signing. Fixed menubar display bug when in dark mode. Fixed /server -a not preserving existing entry's codepage. Fixed Address Book nick colors "idle time" display bug. Changed installer to no longer require administrator access on startup. Added support for displaying an MDI window's System menu when right-clicking its titlebar. Updated libararies to OpenSSL v3.5.7, TagLib v2.2.1, Zlib v1.3.2, and ADA v0.5.5. Updated CA root certificates cacert.pem file. For a full list of recent changes, please see the versions.txt file. Download: mIRC 7.84 | 4.3 MB (Shareware) View: mIRC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You might be right... Look at his name, hiding in plain sight: hAmId.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!