Recommended Posts

I'm pretty sure this is another fan made fake... whoever made it did a nice job of making it look like they filmed it in a theater, but I've read quite a few things on other boards about this one that suggest it is fake...

  • 2 weeks later...

dkchicagosetnew5.jpg

Some spoilers from filmick...

According to film ick, the character that Anthony Michael Hall is going to play is a well known character from the comic book. Apparently, he will appear as Edward Nymga aka THE RIDDLER. Who knows how big or small his part will be. Will he appear as the actual Riddler? I bet he will just appear briefly as Edward Nygma...

Ok, the big on set news is that Aaron Eckhart has reportedly filmed scenes in Two Face Make Up. Yes Kiddies, according to this blog, Harvey Dent will turn into TWO FACE and be a villian in the film. Here is the description:

"55/40. Scarring across the nose just a tad bit. One of his eye is deformed. And little bubbles across the scarring (They're manips that look similar). Wicked cool."

55/40? What's the remaining 5?

The scene may or may not have involved Two Face shooting Flass, the corrupt cop from Batman Begins.

So two villians (Joker & Two Face)?

I'm not too excited about that. I want the Joker to have all the villain screen time.

This isn't just a casual baddies vs goodies thing, there's complex stuff going on here. The Joker will get plenty of attention though, I'd be surprised if we get more than a glimpse of Two-Face, Harvey Dent (who eventually becomes Two-Face) is in movie and it really depends on the story there going for. Joker could be the one who "makes" Two Face. And then perhaps we get a small teaser at the end as to where they would go for a Batman 3 (I think we can expect a trilogy), much like Batman Begins did.

I can't wait to see this movie, the Nolan bros are great film makers.

Teaser Trailer could be shown before Simpsons:

There have been rumors circulating around the normal internet circles that Warner Bros. won't have anything related to the Batman sequel The Dark Knight ready to go for the San Diego Comic-Con.

Well, guess what? That isn't so.

Superhero Hype! has just received confirmation from one of our most reliable sources that Warner Bros. plans on debuting a teaser in front of some screenings of 20th Century Fox's The Simpsons Movie on July 27, which just so happens to be the same day as the Warner Bros. panel at Comic-Con in San Diego. Don't be too surprised if they decide to spring an unannounced premiere of the teaser for The Dark Knight sometime during that 10:30 AM panel. Stay tuned to Superhero Hype! to find out more about this teaser, and remember where you heard it first!

Source

They are filming the principal city scenes this weekend and next weekend in chicago. According to the tribune, Street closures due to "Batman" filming

When and Where: There will be three street closures on Saturday and Sunday: 6 p.m. to 9:30 p.m., Upper Wacker Drive from Van Buren to Adams Streets; 6 p.m. to 9:30 p.m., Jackson Boulevard from Canal to Franklin Streets; 7 p.m. to 6 a.m., Lower Wacker Drive from Harrison Street to Michigan Avenue.

http://www.chicagotribune.com/news/local/c...2&cset=true

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The entire world moved to the vastly superior and now universally supported Dolby Atmos technology a very long time ago, mate.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!