Recommended Posts

I got a new desk last week (free from work) and a new PC case as well as a new mouse today so I'm all excited with my setup right now :D

pc_case_top.jpg

pc_case_top_open.jpg

pan_room.jpg

Antec P182 FTW :p

What sort of settings rare you using on your camera to take these piccys fella?

They look sooooo good.

I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

Edited by mrk
I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

heh I figured you were using a flash. I need an external flash :(

I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

Ahh...thanks....They do look soooo sharp

Ill have to try some of these settings...I can never get very good indoor shots...always grainy.

img0006bh0.jpg

Main computer "Creation". Like my mousepads? :p

By the way, these aren't my real speakers. They are with the LCD HDTV downstairs.

img0003zl0.jpg

My closet, which has the basket of what I call the "charge station". All my chargers goes in there :p On top is an Asus P5W64-WS Pro motherboard, with a Scythe Andy Samurai heatsink, and the modded Asus X1950 Pro. Just finished testing something on those (They aren't new stuff, just playing around) and removed it from my Danger Den Torture Rack. Yes, I actually use a power drill/screwdriver to build computers. :p

Also lays is a plethora of computer parts on the rack. That rack you see is "current" stuff, or overload, or a combo of both. The other stuff are in large Rubbermaid boxes behind.

img0007tu0.jpg

Currently my test station. These are actually my old AMD Athlon 64 parts, I am temporarily using the Danger Den Torture Rack for testing, and this system is powered by the amazing Tagan TurboJet 1100W power supply. On the side are two old DVD writers, and a retail pack of Tagan's new ITZ 700W PSU.

img0010sw0.jpg

When there's no DDR3 RAM, the P5K3-Deluxe could serve as a doorstop. At least it's useful :p

img0018ea5.jpg

My Dell Inspiron 6400 Core 2 Duo "Breakaway" laptop, kinda sits in the corner. Typically under my bed, but took it out for photographic purposes.

img0015qo6.jpg

My Acer Aspire laptop, which is "Faith". Hooked up to my plethora of color laser printers, laser printer, and some old HP All in One. The Konica Minolta 2400W is on the other side of the room, which not shown.

Certain personally identifiable info is censored ;)

img0017kr5.jpg

My Thermaltake Muse NAS RAID file server, and on the left is where all my central home cables lead to in the basement. Full speed Gigabit network, and cable (As in Cable TV kinda cable) controls are here as well. As you can see, only the top LEDs on my NAS RAID is lit because my 500GB Western Digital hard drive is not installed yet. I just ordered it today :)

img0015qo6.jpg

My Acer Aspire laptop, which is "Faith". Hooked up to my plethora of color laser printers, laser printer, and some old HP All in One. The Konica Minolta 2400W is on the other side of the room, which not shown.

Certain personally identifiable info is censored ;)

Wow!!! How many laser printers do you think you need anyway? :p I am a big fan of having multiple computers, but I don't see how you can possibly need that many printers.

As a side note, isnt it time that we started a new thread? On the description of this thread it says to September.

Back on topic. chconline i wish i had that p5k-3 deluxe board, but then again i dont have any DDR3 memory either, just to look cool.

Heads up for my pictures coming soon. I will receive my Graphics Card, Processor, and RAM on thursday to complete my fir st ever computer so i wont be embarrased to post my piece o' crap. Pics should be up on Thursday. Cant Wait!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They couldn't have done a better job, this is beautiful!
    • Oh, of course not. The real "victims" are the people who snipe kids in the head, have killed more journalist than all the worlds wars combined, do double tap strikes on medical personnel, claim history started on October 7th, have a $700 million dollar annual Hasbara budget and pay influencers $7k a post to spout exactly this kind of propaganda. How dare you question the most moral army in the world. Victimhood belongs to these genocidal freaks alone. Anyone who denies that is literally Hitler. If you're going to support a terrorist state, the least you could do is come up with better talking points.
    • Gears of War: E-Day brings 12-player co-op, smoother traversal mechanics, and more by Pulasthi Ariyasinghe Right as the Xbox Games Showcase came to an end today, The Gears of War developer The Coalition took over to show off its next project: E-Day. This prequel project was announced back in 2024, but now we have a lot more details about its campaign, new gameplay mechanics, and even a release date. The studio says this is the first time it has managed to get the time to build the entire game in a new engine, as it had worked non-stop on new titles for years while porting classic code and assets. With Unreal Engine 5 now powering Gears of War: E-Day, The Coalition says it started completely anew, with all assets, animations, environments, and others being built from scratch. The campaign will take place across three days in the city of Kalona. The story will follow the events through the eyes of Bravo Squad. This is made up of the returning classic duo Marcus and Dom, as well as the new characters Mags Carter and Lucas Reyes. Watch the trailer below to see Marcus in action without his iconic armor and gear, just as the Locust invasion kicks off. The story will draw on classic Gears novels like Aspho Fields as well, with the studio even collaborating with author Karen Traviss. "That continuity is what makes the destruction land," says the studio. "In E-Day, you watch a living city torn apart—homes still lit, meals half-finished—while people abandon their cars and run for cover. Small details—a child’s toy, an uneaten dinner—make the loss real as everyday places collapse under the Locust assault." The movement system is getting a big overhaul here. Players will be able to slide while running, jump across gaps, climb head-height covers, and even crawl on the ground to avoid fire from enemies. As for the returning horde mode, The Coalition teased a new 12-player PvE mode. This will involve three squads of Gears going up against the incoming Locusts in larger city maps than usual. The studio says that it is going to reimagine the classic formula just as co-op games are going through a resurgence. Multiplayer was touched on today too, where Versus is coming back touting four versus four Gears PVP action set across Kalona maps. More details about multiplayer will be revealed later. Open beta weekends are kicking off this August for fans wanting to jump in early too. Gears of War: E-Day is releasing on Xbox Series X|S and PC on October 6 with pre-orders available now. It will also be a part of Xbox Game Pass on day one. Microsoft has confirmed this as an Xbox platform exclusive, as there are no plans to bring it to PlayStation or Switch.
    • Microsoft announces the return of Xbox exclusives with Gears of War and Clockwork Revolution by Pulasthi Ariyasinghe Microsoft had plenty of announcements to make today at the Xbox Games Showcase celebrating 25 years of the gaming brand. Now, under the leadership of the new Xbox CEO Asha Sharma, Xbox games are going back to their original release methods. She appeared in the livestream itself to announce the return of Xbox console exclusives. This means two major upcoming games from first-party studios won't be coming to PlayStation or Nintendo consoles: Gears of War: E-Day from The Coalition and Clockwork Revolution from InExile. Both titles will only be coming out on Xbox Series X|S consoles and Windows PCs, ditching any plans they had for PlayStation. "These are not timed exclusives," confirmed Microsoft. "We’re committed to investing in and growing XBOX both on console and beyond." The company confirmed that any already announced Xbox titles for PlayStation, under previous leadership, will continue to arrive for the rival platform. This means games like the new Halo remake, Forza Horizon 6, Fable, and State of Decay 3 will still be available on PlayStation, either at launch or later. It sounds like any new projects announced by the company will avoid other consoles in the same way. Microsoft first opened the floodgates by bringing titles like Sea of Thieves, Grounded, Hi-Fi Rush, and Pentiment to PlayStation and Nintendo consoles back in 2024. Since then, almost every new game release from Xbox Game Studios has arrived for rival consoles alongside Xbox and PC. This decision follows Sony's plans to ditch its own multiplatform releases too. Outside of multiplatform live service titles, the PlayStation maker is even abandoning its PC porting endeavors that started years ago.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      66
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!