Post your Workstations 2007

By Si
in Hardware Hangout

 Share

Recommended Posts

Experienced

J2733

Posted
Posted
I got a new desk last week (free from work) and a new PC case as well as a new mouse today so I'm all excited with my setup right now :D

pc_case_top.jpg

pc_case_top_open.jpg

pan_room.jpg

Antec P182 FTW :p

What sort of settings rare you using on your camera to take these piccys fella?

They look sooooo good.

Grand Master

Robbie Khan Reviews

Posted
  • Reviews
Posted (edited)

I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

Edited by mrk
Grand Master

sin-ergy

Posted
Posted
I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

heh I figured you were using a flash. I need an external flash :(

Experienced

J2733

Posted
Posted
I use all manual settings on the camera with a canon 430ex flash also in manual mode - usually at 1/4 power and on non e-ttl mode.

Camera shoot parameters are commonly for indoor shooting whihc I set to 1/30sec to 1/200 (depends on if I want to show highlight objects like TFT etc or freeze indoor movement like kids running etc) and the fstop is almost always on f4 or 5.6 - only drop to 2.8 really if I am not using the flash though IS is very handy in this scenario!

ISO speed is normally at iso400 but I will use 800 and 1600 indoors too without much hassle - gets nice almost noise free images too :)

All manual settings rocks because you avoid relying on the camera to do the exposure guesswork and you don't have to constantly remember to take a spot meter reading of "x" area before taking each shot just incase the camera exposes for the wrong area of the scene if you normally focus then recompose the frame!

NightCrawler: I just tried but it appears to be a break-it method if you try to force the door off! you can however make open the door all the way round so it sides with the side panel as an alternative.

Ahh...thanks....They do look soooo sharp

Ill have to try some of these settings...I can never get very good indoor shots...always grainy.

Grand Master

chconline Veteran

Posted
  • Veteran
Posted

img0006bh0.jpg

Main computer "Creation". Like my mousepads? :p

By the way, these aren't my real speakers. They are with the LCD HDTV downstairs.

img0003zl0.jpg

My closet, which has the basket of what I call the "charge station". All my chargers goes in there :p On top is an Asus P5W64-WS Pro motherboard, with a Scythe Andy Samurai heatsink, and the modded Asus X1950 Pro. Just finished testing something on those (They aren't new stuff, just playing around) and removed it from my Danger Den Torture Rack. Yes, I actually use a power drill/screwdriver to build computers. :p

Also lays is a plethora of computer parts on the rack. That rack you see is "current" stuff, or overload, or a combo of both. The other stuff are in large Rubbermaid boxes behind.

img0007tu0.jpg

Currently my test station. These are actually my old AMD Athlon 64 parts, I am temporarily using the Danger Den Torture Rack for testing, and this system is powered by the amazing Tagan TurboJet 1100W power supply. On the side are two old DVD writers, and a retail pack of Tagan's new ITZ 700W PSU.

img0010sw0.jpg

When there's no DDR3 RAM, the P5K3-Deluxe could serve as a doorstop. At least it's useful :p

img0018ea5.jpg

My Dell Inspiron 6400 Core 2 Duo "Breakaway" laptop, kinda sits in the corner. Typically under my bed, but took it out for photographic purposes.

img0015qo6.jpg

My Acer Aspire laptop, which is "Faith". Hooked up to my plethora of color laser printers, laser printer, and some old HP All in One. The Konica Minolta 2400W is on the other side of the room, which not shown.

Certain personally identifiable info is censored ;)

img0017kr5.jpg

My Thermaltake Muse NAS RAID file server, and on the left is where all my central home cables lead to in the basement. Full speed Gigabit network, and cable (As in Cable TV kinda cable) controls are here as well. As you can see, only the top LEDs on my NAS RAID is lit because my 500GB Western Digital hard drive is not installed yet. I just ordered it today :)

Mentor

12Iceman

Posted
Posted
img0015qo6.jpg

My Acer Aspire laptop, which is "Faith". Hooked up to my plethora of color laser printers, laser printer, and some old HP All in One. The Konica Minolta 2400W is on the other side of the room, which not shown.

Certain personally identifiable info is censored ;)

Wow!!! How many laser printers do you think you need anyway? :p I am a big fan of having multiple computers, but I don't see how you can possibly need that many printers.

Collaborator

guaterickie

Posted
Posted

As a side note, isnt it time that we started a new thread? On the description of this thread it says to September.

Back on topic. chconline i wish i had that p5k-3 deluxe board, but then again i dont have any DDR3 memory either, just to look cool.

Heads up for my pictures coming soon. I will receive my Graphics Card, Processor, and RAM on thursday to complete my fir st ever computer so i wont be embarrased to post my piece o' crap. Pics should be up on Thursday. Cant Wait!

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • "CRAZIER than ever!" Crazy Taxi: World Tour is officially coming soon

      By margrave · Posted

      YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    • Apple's AI smart glasses and Vision headset plans reportedly delayed, again

      By AnalystDan · Posted

      Apple are scared of their customers! They have built a brand over the years of "it just works out of the box", but that slows innovation. Samsung's master stroke was the Galaxy Ultra: "Let's cram everything into one handset, make it so stupid only real nerds will love it, some of the features will work, some won't, but the audience will have such a high tolerance they won't care". Apple has no such device and so they are constantly worrying these days about the fallout of creating a new experience that customers might not like. I know it is often cited the reason they don't build a touchscreen Mac Book is they don't want to cannibalise the the iPad market, but I think it's equally cold feet after the criticism Microsoft receive trying to make a touch compatible desktop OS
    • HandBrake 1.11.2

      By Copernic · Posted

      HandBrake 1.11.2 by Razvan Serea HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. Handbrake can process most common multimedia files and any DVD or BluRay sources that do not contain any kind of copy protection. Here is a detailed breakdown of HandBrake’s features: Built-in Device Presets—Get started with HandBrake in seconds by choosing a profile optimized for your device, or choose a universal profile for standard or high quality conversions. Simple, easy, fast. For those that want more choice, tweak many basic and advanced options to improve your encodes. Supported Input Sources—Handbrake can process most common multimedia files and any DVD or Blu-ray sources that do not contain any kind of copy protection. Outputs: File Containers: .MP4(.M4V) and .MKV Video Encoders: H.265 (x265 and QuickSync), H.264(x264 and QuickSync), H.265 MPEG-4 and MPEG-2, VP8 and Theora Audio Encoders: AAC / HE-AAC, MP3, Flac, AC3, or Vorbis Audio Pass-thru: AC-3, E-AC3, DTS, DTS-HD, TrueHD, AAC and MP3 tracks Additional features: Title/ Chapter Selection Queue up Multiple Encodes Chapter Markers Subtitles (VobSub, Closed Captions CEA-608, SSA, SRT) Constant Quality or Average BitRate Video Encoding Support for VFR, CFR and VFR Video Filters—Deinterlacing, Decomb, Detelecine, Deblock, Grayscale, Cropping and Scaling Live Video Preview HandBrake 1.11.2 changelog: All platforms Video Fixed a crash that happened when doing a 2-pass lossless x265 encode Fixed a memory leak that happened when doing a 2-pass MPEG-4/MPEG-2/VP9/FFV1 encode Audio Updated the list of supported dithers and encoders combinations Fixed the Core Audio AAC encoder 7.1 channel layout Subtitles Fixed the VobSub palette creation in the MP4 container Build system Improved build system compatibility with older build tools Third-party libraries FFmpeg 8.0.2 (decoding and filters) SVT-AV1 4.1.0 (AV1 video encoding) Linux Added WebM MIME type to the list of the supported formats Mac Improved handling of unsupported presets Updated Sparkle automatic update library Windows Improved handling of unsupported presets Improved queue low space pause behaviour Fixed the automatic audio track name generation Fixed the summary description of HDR video Download: HandBrake 64-bit | Portable 64-bit | ~30.0 (Open Source) Download: HandBrake ARM64 | Portable Links: HandBrake Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame

      By grunger106 · Posted

      So, an article that has nothing to do with Windows 11, still gets Windows 11 in the title and a build number as the picture? Dell have a buggy build of Support Assist HP have UEFI settings that need unlocking for the secureboot cert upgrade to take place.
    • I Can't Wrap My Head Around This Number - Google to buy computing from SpaceX at $920 million per month

      By Nick H. · Posted

      What I can't seem to understand is that Google are paying SpaceX? Surely it would be the other way round, with SpaceX needing Google's datacenters etc.? Oh well, this level of money and power is way outside of my comprehension at the best of times.

  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      71
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      67
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!