Hopefully buying a 1988 Supra today.


Recommended Posts

Yep, I think I finally found myself a car. It's a 1988 Toyota Supra, the body and chassis have just over 126k miles on it and the motor has around 100 miles on it. It's been sitting for about a year, needs a rear window, throw out bearing, knock sensor, and probably new tires. I hoping to get it for about $2,500 because I have a budget of between $5,000 and $6,000 and I bet I could get it up and running by this weekend. It's turbo and and a targa top so it'll be nice when it's done. I'll post some pictures when I get it towed to my work.

Link to comment
https://www.neowin.net/forum/topic/626265-hopefully-buying-a-1988-supra-today/
Share on other sites

one problem...no one likes the old Supras, its the old ones everyone craves. the old motors wernt exactly power monsters in any form. If the car is stock then forget about the Knock Sensor I have it turned off on all my cars.

IMO, $2500 is an awful lot of money for a 20-year old car.

I pretty much paid $2500 for a $5500 motor and turbo. So it's a decent deal.

I've pretty much tracked down all the parts that I need. I'll go around when its up and running and get quotes on bodywork and paint.

I pretty much paid $2500 for a $5500 motor and turbo. So it's a decent deal.

I've pretty much tracked down all the parts that I need. I'll go around when its up and running and get quotes on bodywork and paint.

It's going to be important that you post picture when you're done with it!!! Just to see the difference.

Will you do something for the rust under the car? How is the inside of the car?

i would tend to agree, that's a fair amount of money esp since you probably have to dump in bout 2000 for repairs, and then if you are goin to paint it (do not take to somewhere like maaco if you want the paint to last) is goin to run you thousands of dollars to complete (i used to work for an auto paint company i can almost gaurantee that).

Good luck to you and if it's your dream machine then go for it.

I just think you probably should have looked for something in a bit better condition.

Well I have some parts coming for it. I have a hatch with an intact window, the body panel that sits between the taillights, and some body trim coming from one place. I have a clutch part coming from Toyota and a knock sensor coming too. As soon as all that is here and on, all it really needs is an exhaust, rear struts, and I'll probably get new rotors and pads all the way around. It has no exhaust what so ever. So far, including purchasing the car (parts have been $300 total so far), I have spent under $3k, which isn't too bad because the only auto glass place around here wanted $400 for just the rear window. Yeah, I could've spent that money on a newer car, but where is the fun in that. One of the guys I work with, he used to own it, so he is giving me some pointers and he really wants to see it back on the road. The car isn't in too bad of condition tbh, it just needs a little work and then it should be good. Personally, I will probably go to Maaco and get a $500 paint job to just get by after it's drivable, just to get by mainly.

Edited by biohazard

My buddy had an 88' supra with turbo for a little while. He paid $3500 for it, 200,000 KM's on it. It ran great until a few weeks ago, one of the bearings on the cam was seized and finally messed the entire motor up. While it worked I can tell you this car was VERY fast, and RWD was a plus on it. His Speedo never worked so we never could tell how fast he was going.

If you say the engine is in good shape then I think its worth the money for it...just watch for the bearings on the cam shaft haha

+1

the car is a heap.

Yep currently a heap. However part of the attraction to a lot of car enthusiasts is the journey. It can be very rewarding to take an older neglected car and restore it to what it once was and save an example of a different era from the scrape heap. Anyone with enough money can own a new corvette, but finding and restoring yourself an old stingray is more of a selective club and rewarding. To the OP congratulations on a nice find and try not to bloody your knuckles too much. By the way is your tetanus shot up to date? Good luck with the work.

Wow, $2500 for a 20 year old car? IMHO, that's a rip-off, especially considering the condition. Why not spend a little less on a slightly newer car? (That sounded weird.)

EDIT: soLoredd (below) makes a good point. Good luck!

Edited by TheDreamX

While I also agree with the "it's a heap" judgement, we all need to remember that this is a project and there are people out there who love doing this as a hobby. Who am I to judge on that? Some people spend $2,500 on travel, some spend it on computers, some spend it on home furnishings, some spend it on junker cars to build back up.

Good luck with the work and as stated earlier, post some pictures when you're done!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hasleo Backup Suite Free 5.8.2.2 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.8.2.2 changelog: Improved creation of bootable media that supports the UEFI CA 2023 certificate Fixed an issue that caused system restore to fail Fixed an issue where file backup could not list drives under Windows ARM64 Fixed an issue that caused backup of MacOS files/folders shared via Samba to fail Fixed an issue that caused "Smart Backup" to not work properly Fixed other minor bugs Download: Hasleo Backup Suite 5.8.2.2 | 39.7 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shotcut 26.6.25 by Razvan Serea Shotcut is a free, open source, cross-platform video editor for Windows, Mac and Linux. Major features include support for a wide range of formats; no import required meaning native timeline editing; Blackmagic Design support for input and preview monitoring; and resolution support to 4k. Editing Features Trimming on source clip player or timeline with ripple option Append, insert, overwrite, lift, and ripple delete editing on the timeline 3-point editing Hide, mute, and lock track controls Multitrack timeline with thumbnails and waveforms Unlimited undo and redo for playlist edits including a history view Create, play, edit, save, load, encode, and stream MLT XML projects (with auto-save) Save and load trimmed clip as MLT XML file Load and play complex MLT XML file as a clip Drag-n-drop files from file manager Scrubbing and transport control Video Effects Video compositing across video tracks HTML5 (sans audio and video) as video source and filters 3-way (shadows, mids, highlights) color wheels for color correction and grading Eye dropper tool to pick neutral color for white balancing Deinterlacing Auto-rotate Fade in/out audio and fade video from and to black with easy-to-use fader controls on timeline Video wipe transitions: bar, barn door, box, clock (radial), diagonal, iris, matrix, and custom gradient image Track compositing/blending modes: Over, Add, Saturate, Multiply, Screen, Overlay, Darken, Dodge, Burn, Hard Light, Soft Light, Difference, Exclusion, HSL Hue, HSL Saturation, HSL Color, HSL Luminosity. Video Filters: Alpha Channel: Adjust, Alpha Channel: View, Blur, Brightness, Chroma Key: Advanced, Chroma Key: Simple, Contrast, Color Grading, Crop, Diffusion, Glow, Invert Colors, Key Spill: Advanced, Key Spill: Simple, Mirror, Old Film: Dust, Old Film: Grain, Old Film: Projector, Old Film: Scratches, Old Film: Technocolor, Opacity, Rotate, Rutt-Etra-Izer, Saturation, Sepia Tone, Sharpen, Size and Position, Stabilize, Text, Vignette, Wave, White Balance Speed effect for audio/video clips Hardware Support Blackmagic Design SDI and HDMI for input and preview monitoring Leap Motion for jog/shuttle control Webcam capture Audio capture to system audio card Capture (record) SDI, HDMI, webcam (V4L2), JACK audio, PulseAudio, IP stream, X11 screen, and Windows DirectShow devices Multi-core parallel image processing (when not using GPU and frame-dropping is disabled) DeckLink SDI keyer output OpenGL GPU-based image processing with 16-bit floating point linear per color component Shotcut 26.6.25 changelog highlights: Added basic support for OpenFX (OFX) video plugins. Added VST2 audio plugin support for third-party audio effects. Added Safe Mode to launch Shotcut without external plugins for easier crash recovery. Added an experimental plugin UI generator (--experimental) for supported filters and plugins. Added a new Noise Reduction audio filter powered by RNNoise. Added HDR export support. Added PQ HDR metadata options for HDR exports. Added the ability to view HDR previews in full-screen mode. Improved Vulkan display support on Linux. Fixed DeckLink and UltraStudio external monitor deadlocks. Fixed Opus audio export warnings related to frame_duration. Improved plugin discovery and compatibility for supported OpenFX and VST2 plugins. Expanded command-line options for testing experimental features. Improved overall application stability when using third-party plugins. Enhanced HDR editing and preview workflow. Included numerous bug fixes, performance optimizations, and general stability improvements throughout the application.[full release notes] Download: Shotcut 26.6.25 | Portable | ARM64 ~200.0 MB (Open Source) View: Shotcut Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I looked into a few echo devices to find they were riddled with adverts over time. No thanks ill stick to my homeassistant, smart plugs, smart bulbs and cameras that don't cost me a monthly fee and are cheaper to buy. No adverts also.
    • Brave Browser 1.91.180 is out.
    • Putin or Farage had nothing to do with me voting out. I did so because I got fed up of the E.U telling us what we could and could not do. Fed up with our country being run by a load of unelected Europrats. We never joined the E.U in the first place.
  • Recent Achievements

    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      229
    3. 3
      PsYcHoKiLLa
      163
    4. 4
      Steven P.
      77
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!