Hopefully buying a 1988 Supra today.


Recommended Posts

I almost want to sell this car now. I'm at the point where I need a garage to do things and the 1 or 2 hours I can work on the car after work isn't cutting it.

What do you need a garage to do? I sympathize with you; I have a car that I'm attempting to use as a daily driver and occasional track car. Having to keep it on the road constantly really limits what you can do to it.

Well second gear is cooked. I replaced one spark plug wire and I can boost up to 4 psi atleast.

Well there are a few transmissions on E-bay. How about the junkyards in your area? It would be rough, but you could probably change out the entire tranny in a weekend if you source an inexpensive one. You mentioned the throwout bearing earlier, did you fix that yet? What exactly is cooked with second gear? The gear itself or the synchros? I wish I could help more. Only you know how much more you want to put into this. Are you at your 5k-6k budget yet? If you sell it at this point I'm afraid that you might have to eat a loss on your project. However a working Supra of your year has some value regardless of body appearance. I recommend that you at least get it running right before attempting to sell.

Now where did I put that salt? Ohh it's over there by that wound.

This is a project car with the stated budget of 5-6k. If he comes in under his original budget then so far it is a success. The engine and turbo alone was posted as being worth 5,500. I don't know if that is true or not, but if it is he is doing pretty well. With restoring or even just tinkering with cars a lot of the time it is about the journey more than the destination. If this is how he chooses to spend his money and free time, it is probably more productive than hookers and crack and he can even post pictures of it in this forum.

What a waste of money.
And it's not even nice on the eyes... Will be hard to sell...

You guys have no idea on how car restoration works... that thing will be a gem one day if done right...

People have taken rust buckets worse than this and turn them into great cars.

Glad to hear it. How is the transmission doing? If I could make a suggestion, put the black molding on the places it is missing. I think it would make worlds of difference in the exterior appearance at least till you have a chance to go over it properly. Any interior pics?

Glad to hear it. How is the transmission doing? If I could make a suggestion, put the black molding on the places it is missing. I think it would make worlds of difference in the exterior appearance at least till you have a chance to go over it properly. Any interior pics?

I need to call the Toyota dealership so I can order the second gear and syncro. To put the black trim back on, I would have to pull the interior of the doors apart and it doesnt bother me that much. I'll get some interior picutres up sometime.

Glad to hear it. How is the transmission doing? If I could make a suggestion, put the black molding on the places it is missing. I think it would make worlds of difference in the exterior appearance at least till you have a chance to go over it properly. Any interior pics?

That would be one of the last things to do on a restoration car. Get the drivetrain/suspension/exhaust going first, then worry about cosmetic crap later.

That would be one of the last things to do on a restoration car. Get the drivetrain/suspension/exhaust going first, then worry about cosmetic crap later.

You are probably right, but this car is going to be in progress for a while longer yet. I just think that those pieces would help clean up the lines of the car greatly. That is the first thing I notice when looking at pictures of the car, way before I see any faded paint or dents or other defects. Humor me and just tape some black tape up there and take a few steps back and take a look at it. It does seem like it would take a bit of work to do though. Maybe consider doing it when you find yourself waiting for parts sometime. Anyway just food for thought and of course the mechanics are most important. Good luck with the transmission.

With more mechnical work to go on the car, it's silly to redo the interior/exterior of the car. It'd be like having a fresh coat of paint on it before you pull/rebuild/reinstall the motor. If anything just sand and primer it untill the time comes to put the "lipstick and mascara" on it. :p

With more mechnical work to go on the car, it's silly to redo the interior/exterior of the car. It'd be like having a fresh coat of paint on it before you pull/rebuild/reinstall the motor.

No, now that would be silly. What it'd be like, in fact what it is exactly, is attaching what appears to be 4 pieces of molding. Bio posted that it would be difficult to remove the door panels in the Supra. I don't know I have never removed the door panels on a Toyota of that vintage. It would be a fairly trivial matter in say a Mazda or Ford of similar vintage. Those I have done restores on. Bio is free to accept or reject any advice given, and it appears he has rejected mine. My suggestion based on having done restores on a RX-7 and a Mustang of similar year was to consider installing molding to clean up the lines not to spend large amounts of money or time with appearance items; no more no less.

  • 3 weeks later...
I'm pretty much at a stand still with it right now, I kinda want to sell it because I found something else fun.

Consider the price you paid for it in the beginning, and the money you've put into it so far. In the end it's your choice. :)

Might make fun of me for this, but I found a 2000 Ford Crown Victoria P71, aka Police Interceptor. I was actually looking for one of these before I bought the Supra. Has the big push bar on front. If I would have found this one before, I would have bought it and with what I've put in the Supra, I would have pretty much done what I want to do to one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Do you live in the U.K? Do any of the people here that are against the UK leaving the E.U, live in the U.K? If not then why are you bothered? If you do live here then it is a different thing . Brexit was a good idea, should have done it years before, it was done badly, but the idea was good. You are saying the same thing as remainers do, oh we did what Putin wanted, we listened to the lies and Farage. I hate Farage and never believed most of what he said, certainly did not believe the £350m a week for the NHS. But we did pay a lot of money to the E.U and yes some of it came back, but what is the point of paying it out for only some of it to come back? Get out of the E.U, no money to them and in theory we can use the money to do things in the country. I said in theory, but our governments are a total and complete waste of space. No matter what colour rosette they wear. You and others say it was a mistake and yet the two main parties in the U.K are not looking at rejoining the EU, I wonder why that is? I was not tricked by anyone. Makes no odds now, we are out and have been for 10 years, what we need is a decent government to run the country. All they do is shout at each other like a load of kids and seems to do nothing and make this country more into a police and nanny state. Getting more like China all the time.
    • 4TB TEAMGROUP MP44Q, 2TB T-Force G50, and 2TB WD My Passport SSDs drop to great prices by Fiza Ali Prime Day may be over, but there are still worthwhile storage deals available, including discounts on SSDs for shoppers who missed the event or are looking to upgrade their storage solution. Particularly, 2TB Western Digital My Passport, 2TB TEAMGROUP T-Force G50, and 4TB TEAMGROUP MP44Q SSD are selling at great prices with up to 23% off. The 2TB TEAMGROUP T-Force G50 is an M.2 2280 PCIe 4.0 x4 NVMe SSD with sequential read speeds of up to 5,000MB/s and sequential write speeds of up to 4,500MB/s. The drive has an endurance rating of 1,300 TBW (terabytes written) and features a DRAM-less design. The company specifies a mean time between failures (MTBF) of 3 million hours. The drive includes an "ultra-thin" graphene heat spreader that helps dissipate heat without significantly increasing the drive's thickness. It also supports S.M.A.R.T. monitoring, allowing compatible software to monitor drive health and operating status. The SSD is rated for operating temperatures from 0°C to 70°C, with a storage temperature range of -40°C to 85°C. The drive is backed by a five-year limited warranty as well. 2TB TEAMGROUP T-Force G50 SSD: $269.99 (Amazon US) The TEAMGROUP MP44Q is an M.2 2280 PCIe 4.0 x4 NVMe SSD that delivers sequential read speeds of up to 7,000MB/s and sequential write speeds of up to 5,900MB/s. It uses 3D QLC NAND flash memory to provide 4TB of storage capacity for games, applications, media files, and other data. The drive has an endurance rating of 2,000 TBW and an MTBF of 1.6 million hours. The SSD features a DRAM-less design and supports TEAMGROUP's S.M.A.R.T. monitoring software, allowing users to monitor drive health, temperature, and remaining lifespan. For thermal management, the MP44Q also includes an "ultra-thin" graphene heat spreader. It is designed to operate at temperatures between 0°C and 70°C and can be stored at temperatures ranging from -40°C to 85°C. The SSD is also backed by a five-year limited warranty. 4TB TEAMGROUP MP44Q SSD: $478.99 (Amazon US) The 2TB WD My Passport SSD connects via a USB-C port using the USB 3.2 Gen 2 interface. It delivers sequential read speeds of up to 1,050MB/s and sequential write speeds of up to 1,000MB/s through NVMe technology. In terms of security features, the drive includes password protection with 256-bit AES hardware encryption. The SSD is also designed to resist shock and vibration and is rated to withstand drops from heights of up to 6.5 feet. The recommended operating temperature range is 5°C to 35°C, while the non-operating temperature range is -20°C to 65°C. This drive is also backed by a five-year limited warranty. 2TB Western Digital My Passport SSD: $279.99 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Yeah... The root of my comment, ostensibly, is how to spin the story via the actual technical merits of the solution! * Decentralized (aka federated) solution with built-in encrypted ephemeral message transport, * Transport via Relays (intermediary servers) with no message archival, * Second configurable pathway are actual email servers (if DNS records are programmed accordingly) via IMAP protocols carriage, * "Chat-over-Email" is the design pattern adopted; it can either leverage full-blown Email Server (must use the INBOX folder) to exchange all received messages/edits/reactions (so be weary of notifications overloads) [best practice is creating a separate email acct used explicitly for federated chat purposes!] or leverage its built-in Relay Server mechanism which actually resides on-device (by default but can be configured otherwise), * By virtue of be a decentralized/federated model, all other intermediary servers who may pass-along messages (while the recipient's final relay/device is inaccessible) cannot snoop on the messages due to the encrypted nature of contents. The intermediaries may, however, analyze the metadata due to the simple fact that routing mechanisms require hints for relay destinations. Unfortunately, whomever is posting about DeltaChat across socials are misleading with "zero metadata" claims -- especially when the Relays (according to their own technical documents) mandate the addition of chat-version metadata and other decorations in order to actually transport any message. -- Based on this summary, I'd prefer if they'd better dual-path message transport (email server add-in, federated relay engine) rather than patch-on email protocols to existing federated social media frameworks. They're frankensteining something rather than extending widely-deployed technology stacks.
    • Decentralized search result anonymization...
    • Russia invaded Crimea, so not sure what you are getting at. Are you saying that the E.U is like what the USSR was? What is wrong with wanting control over your own country? i bet Trump would not stand by and allow Canada to control the U.S.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!