official GRID PC specs


Recommended Posts

The demo is great. I'm amazed by how hell the game runs even though it sets the graphics detail to medium by default. I currently run the demo at 1680x1050 with 2xAA applied and all settings to medium. It definitely looks better than X360 demo I tried at a friend's house.

The 2.66 GHz C2D is a lot faster than the 2.4 GHz X2 3800+. They're not a close match at all :s

well i am running the game on vista ultimate with a X2 3800 @ stock speeds of 2ghz and a stock speed 8600gts with 2gbs of ram in my entire system and the game runs @ 1280x1024 just fine without issue with all graphics on the highest setting with 2xFSAA i am impressed with the physics and everything about the game and i have drive assist off cause with it on it is a bit more auto pilot

if you turn the assists OFF the car will feel more 'alive' hope this helps a few people out

I'll try that when I play the demo again.

By the way, press shift to access the advanced options in the graphics options menu. It confused the hell out of me for a few minutes because it showed an upward arrow. I hope I'm not the only person that was confused by a simple icon. :unsure:

yea i saw that when i first went into the gfx options, for me its 'Y' on the controller as i use a x360 controller

Heh, I'd use a X360 controller if I could. I have two and both are wireless. Have you tried cranking up the graphics? Try setting everything to it's maximum setting. I'm curious to see how well your rig can handle the game at details beyond medium settings.

let me have a shimmy now and i'll get back to you

Well reports are in and the news is good

With ALL advance graphical options either running High or Ultra (depending on what setting it was) running at 1280x1024 with x2 AA i managed a very smooth game, fraps reported an average of 30fps with cars then as soon as i lost them (half way round 2nd lap) it went upto 40+

EDIT: i have disabled HDR from my game as i dont like it, but this is down to personal preference, also heres 1 more little gameplay tweek for you.

Run the game and when your in the main menu bring up 'task manager' and find the grid.exe entry, change the priority from low to normal, for some reason Codes set the games proiorty to low, but changing it to normal helps out bags, im hitting 35fps with cars around me now.

Just a small point if not not a fan of HDR 'eyecandy' then you can remove it and it speeds the game up by quite a bit, not sure if reverse enginerring is allowed but contact me if u wanna know

Edited by Unimatrix Xero
Quiet pathetic. Yet again no support for the Logitech Rumblepad 2 (even the advanced settings do nothing), tapping left or right turns the steering wheel FULL LOCK, same as DiRT.. what a complete waste of a game.

Get an Xbox 360 controller, they're just better and more likely to have game support.

Get an Xbox 360 controller, they're just better and more likely to have game support.

i also recommend that. it is totally worth it. if any controller works with a game it will be the 360 controller.

they are also really nice to use and have analog accelerate and brake triggers which imo is REQUIRED to play grid.

let me have a shimmy now and i'll get back to you

Well reports are in and the news is good

With ALL advance graphical options either running High or Ultra (depending on what setting it was) running at 1280x1024 with x2 AA i managed a very smooth game, fraps reported an average of 30fps with cars then as soon as i lost them (half way round 2nd lap) it went upto 40+

EDIT: i have disabled HDR from my game as i dont like it, but this is down to personal preference, also heres 1 more little gameplay tweek for you.

Run the game and when your in the main menu bring up 'task manager' and find the grid.exe entry, change the priority from low to normal, for some reason Codes set the games proiorty to low, but changing it to normal helps out bags, im hitting 35fps with cars around me now.

Just a small point if not not a fan of HDR 'eyecandy' then you can remove it and it speeds the game up by quite a bit, not sure if reverse enginerring is allowed but contact me if u wanna know

Very nice. I'll give a go at turning up the settings too. Thanks!

Also getting the most recent nvidia drivers help (that is if you have an nvidia)

Yep, I have an ATI video card and my drivers are up to date.

i think HDR in this game is very well done for a raceing game and it work out well i dont see the need to turn it off cause i get playable FPS with it left on anyways i am not so Nuts when it comes to not havening big big FPS in a game . as long as it is playable then i am fine and playable to me is above 28FPS or more but as it is i am getting a good 38FPS out of this game

i think HDR in this game is very well done for a raceing game and it work out well i dont see the need to turn it off cause i get playable FPS with it left on anyways i am not so Nuts when it comes to not havening big big FPS in a game . as long as it is playable then i am fine and playable to me is above 28FPS or more but as it is i am getting a good 38FPS out of this game

HDR is gorgeous and well worth having. I run everything in 'High' @ 1680x1050 at 40+ FPS so I'm happy enough (Y)

HDR is gorgeous and well worth having. I run everything in 'High' @ 1680x1050 at 40+ FPS so I'm happy enough (Y)

Nice. Our computers are pretty much identical, except for the video card. I have a Radeon HD2900XT.

I was playing again earlier today and I realized something. The game defaulted to 2xAA but it felt like 4xAA was applied. :blink:

Nice. Our computers are pretty much identical, except for the video card. I have a Radeon HD2900XT.

I was playing again earlier today and I realized something. The game defaulted to 2xAA but it felt like 4xAA was applied. :blink:

I never enable AA and only AF at 2x maximum.

Unreal! The demo runs perfectly at maximum details with 2xAA applied. Wow, I would've never expected it to be so smooth. I honestly haven't noticed a drop in FPS from medium to maxed out settings. :omg:

I get around 50-60 everything maxed out, 16x AA etc, the gfx looks good on the Mustang and drift races, but the touring race doesn't look as good. I'm using 2 8800GT's and a q6600

Very nice. I agree with you. The race with the BMW car doesn't show off the graphics because it's too bright. The drift one really shows off the good lighting, and the Mustang race is just great. I'm obsessed with watching the replays. Hehe.

The 2.66 GHz C2D is a lot faster than the 2.4 GHz X2 3800+. They're not a close match at all :s

Yeah and an 8800 is WAY faster than an x1950 what the hell were they thinking with the recommended specs? it should have been like 2.66ghz core2/5000+ and 8800GT/3870 or something.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!