Recommended Posts

+evn

GeekBench results

The zip at the bottom has the actual GeekBench .geekbench files

Here is my Install info

Ok I finally took the plunge (Sorta) and upgraded my 10.5.8 to SL

I made a Carbon Copy Cloner bootable backup and upgraded that on an external drive.

The custom options i chose in the OS X installer were to remove languages and extra fonts, i allowed it to install printer drivers for devices used by my Mac (a lexmark x75 AIO)

I installed Rosetta, Quicktime 7 (it actually copied my PRO key of QT correctly sweet!) and X11

The only difference from when i Installed 10.5 is that i was able to not install languages and fonts and ALL printer drivers (I wonder if all languages/fonts and drivers still exists from my previous instal?)

Installer Said it needed to use an additional 3.89gb more than what was used currently. but when comparing the before and after drive size in SL it was 3.47gb

Im not sure why it didn't save me any space, unless Apples claim is only for the Fresh install footprint, Xslimmer 1.7 said i could get another 186mb (had previously used it on 1.5)

Clean install with no printers/languages/fonts/x11 - minimal install was 4.61gb in this same system, Xslimmer 1.7 says it can get 124mb from this clean install, CleanMyMac says it can get 299.5mb in language files from the system apps and 22.9mb stripping the binaries

And for anyone interested LCC 3.0 does work

GeekBench_results.zip

post-24918-1251639282_thumb.png

Edited by Phantom Helix
I love the fact Microsoft openly declared that Microsoft Office 2008 is fully ready for Snow Leopard, yet they failed to mention this little detail.

No idea why the installer is still PPC-only.

Because installing Rosetta (a few MB) will install Office 2008, which then works fine on Snow Leopard.

I'm sure no one would have a problem if some of Apple's software still needed Rosetta on Snow Leopard.

Office 2008 still works on PPC mac's, so that's probably why.

Instead of clicking "compile for PPC", I'm pretty sure Microsoft could have clicked "compile Universal Binary" and it would have worked on both Intel and PPC, natively.

Can someone tell me who the hell they hired to work on Mac products at Microsoft? It's so freaking ridiculous at times... :pinch:

Instead of clicking "compile for PPC", I'm pretty sure Microsoft could have clicked "compile Universal Binary" and it would have worked on both Intel and PPC, natively.

Can someone tell me who the hell they hired to work on Mac products at Microsoft? It's so freaking ridiculous at times... :pinch:

Again, if you need Office 2008, I'm sure you can spare a few MB or w/e to install Rosetta.

Because installing Rosetta (a few MB) will install Office 2008, which then works fine on Snow Leopard.

Why would I possibly want to do that? The Microsoft Office 2008 installer is the only aspect of the entire application suite that requires Rosetta. All the main applications are fully Universal and run perfectly fine without it. There's no reason for them, except laziness or it being a stupid oversight, to include a PPC-only installer.

If certain parts of Office 2008 still required Rosetta, they should have corrected that by now.

I'm sure no one would have a problem if some of Apple's software still needed Rosetta on Snow Leopard.

Actualy I'm pretty sure people would have a problem with Apple.

Office 2008 still works on PPC mac's, so that's probably why.

That makes no sense whatsoever.

+evn

GeekBench results

The zip at the bottom has the actual GeekBench .geekbench files

Here is my Install info

Thanks a lot, that's exactly what we're looking for.

From these results I believe you can all stop freaking out for not having the kernel boot in 64bit mode.

I wouldn't go that far just yet. There might be other configurations where it does matter: systems with 8gb of ram, notebooks, etc.

It could also be that there are improvements (or penalties) in application launch speed, real-world application performance differences, etc. This piece of evidence is helpful though: it shows that in at least one case (and probably a very common one) it doesn't make a difference for synthetic benchmarks.

I do have to say that that when running my "upgraded" version of SL in 64bit kernel mode it genuinely feels faster, the dock has quite a bit less lag during mouse over with magnification enabled.

apps seem to launch faster either from stacks, dock or directly from folders, the "system" part of it of the experience appears more in sync with itself.

Of course it is annoying as hell when the things that are not compatible with a 64bit kernel don't work.

and I don't believe it's in my head, aside from the synthetic bench's i wish there was some evidence we could show to prove it.

Edited by Phantom Helix
In a clean install the 32bit kernel version feels a lot faster. I cant wait to try the 64bit one, however I will wait as I use many apps that will break in 64bit

You won't actually break anything, when i ran my geekbench test i started in 32 kernel, then switched to 64 and then back again

and vie been running vanilla installs since the WWDC build, my comparison of the system being faster was of itself 32 Vs. 64

Anyone else have bugs with opening multiple files in the new Finder. I thought it was just related to CS4 but I'm getting it with iTunes as well. If I select say 10+ files, drag to the dock icon, it will only one 1 file, not even the selected one when dragging just one at random in the list.

Real annoying, even if I right click, open with. It will only open 1 at a time. Same for just double clicking.

You won't actually break anything, when i ran my geekbench test i started in 32 kernel, then switched to 64 and then back again

and vie been running vanilla installs since the WWDC build, my comparison of the system being faster was of itself 32 Vs. 64

Paralells 4 breaks in 64bit mode, Carrara 5 as well.

Anyone else have bugs with opening multiple files in the new Finder. I thought it was just related to CS4 but I'm getting it with iTunes as well. If I select say 10+ files, drag to the dock icon, it will only one 1 file, not even the selected one when dragging just one at random in the list.

Real annoying, even if I right click, open with. It will only open 1 at a time. Same for just double clicking.

I never knew itunes could play more than one file at a time?

Paralells 4 breaks in 64bit mode, Carrara 5 as well.

What i was getting at is you can still try 64bit and then go back to 32 when you need to use those apps

What i was getting at is you can still try 64bit and then go back to 32 when you need to you those apps

I can be patient, I dont like the idea of rebooting just for an app. 32bit mode is already faster that leopard for me and I know is not a placebo effect, some apps, like safari, beachballed on me on start every time, in SL safari starts immediately.

Given I'm opposed to that concept? ;) Hehe, might not be easy. ;)

Cara, you are opposed to a *beige-box* OS X (Snow Leopard in particular) *why*?

Does it have to do with one thing Apple is insisting on - control of the hardware platform?

Or are there other reasons? (I'm not asking about Apple's opinion, or that of the company you woirk for, but your own.)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!