Recommended Posts

ooh check you :p I don't play as often as some of you guys around here, I'm probably a noob compared to you all lol.

Nevertheless I was proud of my K/D

Nice ratio though dude! Was that all using the Soldier?

Yeah that was back when I had a soldier-fetish (he is still by far my best played class), and was cranking a good 20/30 hours a week (don't have the time for that these days).

PS. Yes that was all with the soldier.

  • 2 weeks later...

WarningMoose1.jpg

52-3.jpg

Then everyone started leaving :(

67-4.jpg

Thought I'd get mine in to show off with :p Over the summer holidays (after my GCSE's) I had about 9 weeks to practice with, so I got pretty good with most classes except spy and medic. Now i can only play about an hour a day at max but I seem to be keeping up my skill level (The demo one was yesterday)

As for scoring;

Kill = 1 (Unless you backstab or headshot which both give you 2)

Capture = 2 (I'm not to sure about cart captures, they might be 1 every few units (of distance) then 2 for a cart checkpoint)

Destruction = 1

Domination = 1?

Assist = 1/2

Nice scores moose (Y) and thanks for the explanation :)

Thanks. You just have to work out little tricks to get good scores and also predicting shots with demo and soldier (I can shoot people in the air with rockets now, well sometimes anyway :D).

I like the scoring system as it tries to make you do something other than kill (so campers get a worse deal unless they are in defence), although this is somewhat countered by stats as they mostly go by kills :(

But I always play high damage characters so I'm ok :p

Oh yeah I forgot to mention GTFO, although I find that they don't have a good social aspect compared to others I've found, the main reason I play on SpA is due to most people being slightly more mature than kids who manage to destroy your eardrums with their whining.

To reply about getting high scores Drunkn, I would say just practice, scout probably is not the class to start on if you want high scores, though after a bit of practice you can easily get to the top of the table. I would recommend sniper or soldier/demo or even pyro if you want high scores. Also if you can go heavy with a medic buddy then you can get extreme scores. Really its just experience, switching between classes to react to the other teams choices and just learning the little tricks per class.

Edited by Minimoose

Yeah over the past month or so I've got really good at Demoman (well I like to think so anyway lol). It's easily my favourite class.

I can rack up kills easily ( I think the highest I've reached was 68 or so), but trying to play without dying often really is a hard thing to do in TF2. I actually found Demoman to be quite effective against spies too, go figure :p

Yeah over the past month or so I've got really good at Demoman (well I like to think so anyway lol). It's easily my favourite class.

I can rack up kills easily ( I think the highest I've reached was 68 or so), but trying to play without dying often really is a hard thing to do in TF2. I actually found Demoman to be quite effective against spies too, go figure :p

Yeah I love demoman because they are quite overpowered if played correctly, as you can see from my pics (and I'm not brilliant). One pipe bomb can do over 125 damage without crits, so some classes are disadvantaged by quite a bit.

One technique with demo is to hide stickies in a corridor exit/doorway and attract people to you by firing your normal pipes, once they come running in, set off the stickies. Then just repeat :p ######, such as me, do this all the time. It also means you don't die much. Also I find using stickies all the time easier than pipe bombs, since the pipes are relatively hard to aim and you have less control over damage.

I'm actually the opposite lol, I find it a lot more effective to use pipe bombs, espeically volleying them. It causes more damage and causes the enemy to jump/fly off course and into objects. I think there is a higher chance of criticals too and one hit kills. It feels like cheating almost but it's quite a skill to master.

Although sticky bombs are great for defence just like you said. I love using them in 2Fort where the two corridors meet the courtyard area. Sticking them around the frames in just the right position and people will usually just run out without checking and boom :D I don't understand why Spies and Scouts keep trying to go the same routes over and over when I keep killing them as soon as they step foot outside :laugh:

Thats pretty cool Decryptor :D

I'm actually the opposite lol, I find it a lot more effective to use pipe bombs, espeically volleying them. It causes more damage and causes the enemy to jump/fly off course and into objects. I think there is a higher chance of criticals too and one hit kills. It feels like cheating almost but it's quite a skill to master.

Although sticky bombs are great for defence just like you said. I love using them in 2Fort where the two corridors meet the courtyard area. Sticking them around the frames in just the right position and people will usually just run out without checking and boom :D I don't understand why Spies and Scouts keep trying to go the same routes over and over when I keep killing them as soon as they step foot outside :laugh:

Yes, demospam is a really good thing to do on dustbowl when you're defending the first cap, everyone piles out of spawn so once you have stickied the cap doorway (hide stickies in between the barrels :)) then you can just spam out of the doorway and you'll get loads of kills. Also they always hide to the right hand side in a little protective curve, just go down into the chasm kind of place down the middle and spam from there, they don't expect it.

The reason I like stickies is that once you practice they can be like slightly less powerful pipe bombs which you can explode in people's faces, I just find it easier (Also its hilarious if you find a heavy eating a sandvich then sticky all around him, wait till he tries to escape then blow him up (to give him a false sense of chance :D)

HardWare Morph

It's Valve's new facial animation system, it's meant to run on hardware (If you have a compatible ATI card), but the TF2 models don't have a larger number of flexes compared to HL2 and such (so there's barely any slowdown compared to non-hwm models)

Type "find hwm" into the console and you'll find the 2 cvars (set them both to 1)

Edit: And "cl_new_impact_effects 1" and "cl_burninggibs 1", nicer effects for bullet impacts, and if somebody gets blown up who was on fire, their gibs remain on fire.

where do i force this so it can be on all the while?

Type "find hwm" into the console and you'll find the 2 cvars (set them both to 1)

Edit: And "cl_new_impact_effects 1" and "cl_burninggibs 1", nicer effects for bullet impacts, and if somebody gets blown up who was on fire, their gibs remain on fire.

but wont that turn off when i quit the game?

If it did then there might be a way to write a script just so that it enters the cvars into the console every time it loads up, not sure though. I've never tried writing script for TF2.

If a script wouldn't work you could just try:

bind <key> "cvar"

For example: bind k "cl_new_impact_effects 1"

In the console then just bind each command to some easy to remember but useless keys, only disadvantage is that you would have to press the keys every time :( Can someone confirm if that would work?

Edited by Minimoose
This topic is now closed to further replies.
  • Posts

    • My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. 
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state.
    • I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times.
    • So how did you solve the problem? Disabling Secure Boot isn’t a solution.
  • Recent Achievements

    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!