Recommended Posts

Here are some pictures to show how much post-processing can change the quality of your work. The file sizes are quite high (796 KB and 1.08 MB) but it's worth the download. Check them out! Of course, comments are welcomed. :)

imagefb1lc4.png

imagefb2lp6.png

crazy88eess where are you from in ca? i see you went to santa clara, thats where I live....if you're ever down to go out shooting sometime let me know.

Livermore.

I only go outside of that area like twice a year :/ Being in school cuts down on my travel, but I'll keep you in mind!

Both pictures taken with Nikon D80 and Hoya R72 filter (EXIF Info available with the Original pictures). Lens used was the 18-135mm one.

The postprocessig included switch of blue & red channels and small correction of saturation. Finished with a small touch-up on curves.

Aww, I was hoping for flickr links so I could favorite those.

I just got a hoya R72 recently, but I can't seem to PP like that.

-Using CS2, I go into the channel mixer.

-Under the Red channel I set the red slider to 0, and the blue slider to 100.

-Under the Blue channel, I set the red slider to 100 and the blue slider to 0.

That's how you switch the channels right? No?

Edited by crazzy88ss

Okay so here's what I have. Everything was changed in Photoshop CS2:

Growth

2723319126_80afc6e678.jpg

This is the original picture.

Growth Postprocessed

2722487327_6ff2ac6e70.jpg

Auto curves, auto color, and some tweaks to hue and saturation.

Growth Vibrant

2722494919_4af20879f4.jpg

Based off of Growth Postprocessed, changed hue and saturation again.

Growth Sepia

2723307194_bfda539097.jpg

Based off of Growth Postprocessed, changed saturation so that it was black and white, then added sepia filter.

Growth Exposure

2722491037_54e9ffeb95.jpg

Based off of Grwoth Postprocessed, added exposure.

Please let me know which you think is best so that I have a better idea on what I should be looking toward while postprocessing. Please also critique the original image. I am an amateur photographer and am looking to get better. Without a DSLR camera for the time being.

This photo was taken using a Canon Powershot S2 IS.

#2 is nice for me, then again, I prefer much pale colors when it comes to Plants :p

And exposure one hurts my eyes :)

BTW you don't need a DSLR to shoot nice photos :)

Thank you for your input :). I think if I can add maybe some filter to the exposure it might look better. But I do agree that it is a little bit too much.

Hey Fowarek,

The first image looks the best to me, in all honesty. I just calibrated my monitor a few days ago and calibrate frequently. The only thing I might do with that image is shoot the hue of the yellow channel slightly towards the greens and get a little more green out of the plants. Kick up the contrast a tad and you shall have a nice photo. You might even experiment with the dodge tool on the bottom leaves and dodge the midtones a little bit too. Might balance the foreground a little with the flower.

Thats more grayscale than sepia, define%3Asepia&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US%3a%6ffficial&client=firefox-a should be a shade of brown basically.

some examples: http://www.flickr.com/photos/tags/sepia/

I know that. That's why I pointed out I made it greyscale first, and then added a sepia filter. I just really didn't want it to be a full blown out sepia picture, because I don't think it would have complimented the picture very well.

It looks my days of amateur photography are over. Due to financial problems, my father has decided to return his camera (Fujifilm Finepix S1000fd). Now I'm stuck with a crappy 5-megapixel cell phone digital camera. :cry:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rockstar gives last-gen GTA V players free upgrades tomorrow by Pulasthi Ariyasinghe Rockstar is preparing to launch Grand Theft Auto VI later this year, but ahead of that, the company has revealed a new offer for some Grand Theft Auto V owners. It today announced that Xbox One and PlayStation 4 version owners of the 2013-released title will soon be receiving a free upgrade to the current generation version. The studio released the Xbox Series X|S and PlayStation 5 version of Grand Theft Auto V back in 2022, bringing significant upgrades to the original console editions. This included 60 FPS gameplay at up to 4K resolution, as well as major upgrades to textures, draw distance, and audio. Faster load times, ray tracing elements, and HDR support were also added with it. While this new and enhanced version needed a new purchase of the game to jump in, now Rockstar has decided to make it a free upgrade, dropping the $40 price tag entirely on consoles. "Beginning tomorrow, those who own any PS4 version or the digital Xbox One version of Grand Theft Auto V will be able to upgrade to the PS5 or Xbox Series X|S versions at no additional cost, and experience the best versions of GTA V and GTA Online," said the company in an official blog post. The free upgrade offer will be released tomorrow, June 18, for all Xbox One and PlayStation 4 owners of Grand Theft Auto V. Players who will be jumping in on the offer will want to check how to migrate their GTA Online profile from last-generation to current-generation consoles by heading over here. The offer lands ahead of The Kortz Center Heist hitting Grand Theft Auto Online, where players and crews will be tasked with stealing priceless international art from a prestigious gallery in Pacific Bluffs. It doesn't look like Rockstar plans to stop updating its previous game even with Grand Theft Auto VI being on the horizon. The latest title is slated to launch on November 19, 2026, across Xbox Series X|S and PlayStation 5.
    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!